Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The ReadytoSky Simonk 30A ESC offers 30A continuous and 35A burst current with a 5V 2A BEC, designed for quadcopters and multi-rotors. Its Simonk-optimized firmware and twisted signal wire deliver fast throttle response and stable control.

Key Highlights

  • 30A continuous and 35A burst current for multi-rotor use
  • Built-in 5V 2A BEC powers receiver and accessories
  • Simonk firmware optimized for disc motors
  • Twisted throttle signal wire reduces crosstalk
  • Supports 2-4S LiPo and 4-12 cell NiMH/NiCd batteries
  • 3.5mm female banana connector for easy motor hookup

Ideal For

  • Drone builders assembling quadcopters and multi-rotors
  • FPV pilots seeking fast throttle response
  • Hobbyists upgrading or replacing ESCs
  • Users needing a built-in 5V BEC for receiver power

Buying Tip

Check that your motor's maximum current draw stays below 30A continuous to avoid overloading the ESC.

Elecvora expert review

Our verdict

The ReadytoSky Simonk 30A ESC offers a solid balance of current handling, integrated BEC, and Simonk firmware for multi-rotor applications. Its lightweight design and stable signal transmission make it a reliable choice for budget-conscious builders.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated 5V 2A BEC simplifies wiring
  • Simonk firmware provides fast throttle response
  • Twisted signal wire reduces interference
  • Lightweight at only 23g
  • Supports a wide range of battery types

Cons

  • Requires soldering for power connections
  • No programming card included for easy settings adjustment
  • Limited to 4S LiPo maximum

Best for

Multi-rotor pilots needing a reliable 30A ESC with BEC

Not ideal for

High-voltage setups beyond 4S LiPo or applications requiring over 35A burst

Specifications

Item TypeElectronic Speed Controller
Constant Current (A)30A
Burst Current (A)35A
Weight (g)23g
Overall Dimension6 x 3 x 1mm
BEC (Y/N)output, 5V2A
Li-ion/Li0poly2-4S,or Ni-MH/Ni-Cd:4-12NIMH
Connector Size3.5mm
Shipping Weight0.025 kg
Shipping Dimensions11 × 8 × 2 cm

What's in the box

  • 1 x ReadytoSky Simonk 30A ESC with 3.5mm Banana Connector (Female)

Frequently Asked Questions

What type of connector does this ESC have?
It features a 3.5mm female banana connector for motor connection.
Can I use this ESC with a 4S LiPo battery?
Yes, it supports 2-4S LiPo batteries and 4-12 cell NiMH/NiCd batteries.
Does this ESC have a built-in BEC?
Yes, it provides a 5V 2A BEC output to power your receiver and accessories.
What is the maximum burst current?
The ESC can handle bursts up to 35A for short durations.
Is this ESC compatible with Simonk firmware?
Yes, it comes with Simonk-optimized firmware for smooth motor control.
What is included in the package?
The package includes one ReadytoSky Simonk 30A ESC with 3.5mm female banana connector.

Overview

The ReadytoSky Simonk 30A ESC is an electronic speed controller engineered specifically for quadcopters and multi-rotors. It provides precise motor speed control with a 30A constant current rating and a 35A burst capability, making it suitable for a wide range of drone builds. The integrated 5V 2A BEC (battery eliminator circuit) supplies power to your receiver and other low-voltage electronics, simplifying your wiring setup.

At the heart of this ESC is a Simonk-optimized firmware that has been tuned for disc motors, delivering fast throttle response and smooth acceleration. The throttle signal line uses twisted wire to minimize crosstalk and interference, promoting stable flight performance. With support for 2-4S LiPo batteries and 4-12 cell NiMH/NiCd packs, this ESC offers flexibility for various power systems.

Key Features

  • Simonk firmware: Optimized for disc motors to provide quick throttle response and reliable performance.
  • High current capacity: 30A continuous and 35A burst current handle demanding flight maneuvers.
  • Integrated BEC: 5V 2A output powers your receiver and accessories without an extra UBEC.
  • Twisted signal wire: Reduces electromagnetic interference for a cleaner signal.
  • Wide compatibility: Works with 2-4S LiPo or 4-12 cell NiMH/NiCd batteries.
  • Ready to connect: Equipped with a 3.5mm female banana connector for motor wiring.

Specifications Explained

Constant Current (30A): This is the maximum current the ESC can handle continuously without overheating. It suits motors that draw up to 30A per arm in typical multi-rotor setups.

Burst Current (35A): Short bursts of up to 35A are allowed for brief periods, such as rapid throttle changes, giving you a safety margin during aggressive flying.

BEC (5V 2A): The built-in BEC converts battery voltage to a stable 5V output, capable of supplying up to 2A to power your flight controller, receiver, or small servos.

Battery Compatibility: The ESC supports 2S to 4S LiPo batteries (7.4V to 14.8V nominal) and 4 to 12 cell NiMH/NiCd packs, covering common drone power configurations.

Connector Size (3.5mm): The female banana connector is a standard size for motor bullet connectors, allowing quick and secure motor connection.

Weight (23g): Lightweight construction helps keep your build agile and extends flight time.

Compatibility and Requirements

This ESC is designed for use with brushless motors in quadcopters and multi-rotors. It requires a compatible flight controller or receiver that outputs a standard throttle signal (up to 621Hz refresh rate). The 3.5mm female banana connector mates with male bullet connectors on your motor leads. Ensure your battery voltage falls within the 2-4S LiPo or 4-12 cell NiMH/NiCd range. Soldering may be required to connect power wires and signal cables to your system.

Typical Uses

Ideal for building or upgrading quadcopters and multi-rotor drones, this ESC is well-suited for FPV racing, aerial photography, and recreational flying. Its fast throttle response and stable signal transmission make it a good match for pilots who demand precise control. Whether you are assembling a new drone or replacing a faulty ESC, the ReadytoSky Simonk 30A provides a dependable solution.

What's in the Box

  • 1 x ReadytoSky Simonk 30A ESC with 3.5mm Banana Connector (Female)

Quick specs

Item Type
Electronic Speed Controller
Constant Current (A)
30A
Burst Current (A)
35A
Weight (g)
23g
Overall Dimension
6 x 3 x 1mm
BEC (Y/N)
output, 5V2A
See all specifications