
1 / 5 · Click to enlarge
AI Summary
A 920 KV brushless outrunner motor for multirotor drones, rated for 7-12 V with 500 g maximum thrust and a 6 mm shaft. It ships with a black cap and clockwise rotation, making it easy to match to the correct arm during a build.
Key Highlights
- 920 KV brushless outrunner for multirotor drone builds
- 500 g maximum thrust per motor for lift planning
- 6 mm shaft diameter and 28 x 28 mm body
- Rated for 7-12 V with a 30 A ESC requirement
- Approximately 60 g motor weight for light builds
- Black cap with clockwise rotation marking for easy identification
Ideal For
- Hobbyists building small to mid-size multirotor drones
- Makers planning lift around a 500 g per-motor thrust figure
- Builders who need a clockwise motor to pair with CCW motors
- Pilots repairing or refreshing an existing 2212 920KV motor set
Buying Tip
Confirm your frame layout needs a clockwise motor and that your ESC is rated for 30 A before ordering, since propellers, ESC and battery are not included.
Elecvora expert review
Our verdict
A sensible, clearly specified motor for multirotor builders who want a known thrust figure and simple electrical requirements. It is not a high-performance part, but it is easy to plan around and install.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 920 KV rating and 500 g maximum thrust for lift planning
- Straightforward 30 A ESC and 7-12 V requirements
- Light 60 g body with a compact 28 x 28 mm footprint
- CW marking and black cap simplify motor identification
Cons
- Propellers, ESC and battery are not included
- Only clockwise rotation is supplied, so a CCW motor is needed for a set
- No warranty or certification details are stated
Best for
Hobbyists building or repairing small to mid-size multirotor drones
Not ideal for
Pilots needing a complete propulsion set out of the box
Specifications
| Motor KV (RPM/V) | 920 KV |
|---|---|
| Motor Type | Brushless Motor |
| Maximum Thrust (gm) | 500 |
| Shaft Diameter | 6 mm |
| Rated Voltage (VDC) | 7 ~ 12 |
| Required ESC (A) | 30 |
| Length (mm) | 28 |
| Width (mm) | 28 |
| Weight (g) | 60 |
| Shipping Weight | 0.064 kg |
| Shipping Dimensions | 8 × 6 × 5 cm |
What's in the box
- 1 x 2212 920KV brushless motor
- 1 x black cap
Frequently Asked Questions
What does 920 KV mean on this motor?
Which ESC do I need?
Is this motor clockwise or counter-clockwise?
What is included in the package?
What shaft size does it use?
How should I care for the motor?
Overview
The ReadytoSky 2212 920KV is a brushless DC outrunner motor built for multirotor drone projects. With a 920 KV rating, it balances RPM and torque for small to mid-size airframes, and its 500 g maximum thrust figure gives builders a reference point when estimating total lift across a motor set. The motor measures 28 mm by 28 mm and weighs about 60 g, so it keeps arm weight reasonable without demanding a large frame.
Key Features
- 920 KV winding for a moderate balance of speed and torque on multirotor builds.
- 500 g maximum thrust per motor, useful for calculating lift margins.
- 6 mm shaft diameter for matching prop adapters and mounts.
- 7-12 V rated voltage to match common battery and power setups.
- 30 A ESC requirement for clear electronic speed controller selection.
- Black cap and CW rotation marking to identify the correct motor position.
Specifications Explained
The KV rating describes RPM per volt, so a 920 KV motor spins faster as voltage rises within its 7-12 V range. That makes it suited to builds where you want controlled, predictable response rather than extreme top-end speed. The 500 g maximum thrust is the figure to use when adding up lift across all motors and leaving headroom for the frame, battery and payload.
The 6 mm shaft sets the size of propeller adapter or mount you need, and the 28 mm by 28 mm body helps you check clearance on the arm. Because the motor calls for a 30 A ESC, choose speed controllers rated to that current. At roughly 60 g, the motor is light enough for compact multirotor frames.
Compatibility and Requirements
This is a clockwise rotating motor, so it should be paired with counter-clockwise motors in a multirotor layout as your flight controller configuration requires. It needs a 30 A ESC and a power source within the 7-12 V rated range. Propellers and adapters must match the 6 mm shaft. The package includes the motor and a black cap; ESCs, propellers and batteries are not included.
Typical Uses
This motor suits hobbyists building or repairing small to mid-size multirotor drones, and it works well where a builder wants a known thrust figure and simple voltage requirements. It is also a reasonable spare for a motor set already using the 2212 920KV size.
What's in the Box
- 1 x 2212 920KV brushless motor
- 1 x black cap
Quick specs
- Motor KV (RPM/V)
- 920 KV
- Motor Type
- Brushless Motor
- Maximum Thrust (gm)
- 500
- Shaft Diameter
- 6 mm
- Rated Voltage (VDC)
- 7 ~ 12
- Required ESC (A)
- 30






















