Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This (esc) drone speed controller is a good fit for RC and FPV hobbyists. Main specs: item type Brushless ESC; firmware BLHeli S; burst current (a) 40.

Key Highlights

  • Item Type: Brushless ESC
  • Firmware: BLHeli S
  • Burst Current (A): 40

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeBrushless ESC
FirmwareBLHeli S
Burst Current (A)40
Flow Continues30A
Shipping Weight0.012 kg
Shipping Dimensions8 × 9 × 1 cm

Overview

The Spedix ES30 HV 3-6s BLHeLi_S 30A ESC is listed in our (esc) drone speed controller range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Brushless ESC
  • Firmware: BLHeli S
  • Burst Current (A): 40 (your supply must deliver at least this much current)
  • Flow Continues: 30A
  • Shipping Weight: 0.012 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 8 × 9 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Spedix ES30 HV 3-6s BLHeLi_S 30A ESC. Spedix ES30-HV is the smallest and lightest 6S 30A speed controller in the category so far. It is designed for 150-300 size racing multirotors that have a strict demand on power, size, and weight. This ESC uses 6 standard MOS-FET with a low resistance of only 1.1mΩ. Compared to the common small size MOS-FET this standard component is much tolerant to current load and surge, and better heat dissipation. However, with our genius engineer design, the overall size of the ESC is almost the same as the counterpart product using micro MOS-FET. The size and weight of the ESC in controlled under 14.8x29x5mm and 7.9 grams, to be the smallest and lightest in the category in the market to date, without any sacrifice in power or reliability. The product is powered by high-performance EFM8BB21 MCU and flashed with the latest BLHeli_S program. With the combination of a dedicated drive chips, this speed controller has excellent response speed and efficiency. The filter circuit of ES30-HV is composed of 12 low ESR capacitors, a number much more than competitors that use only 4-5 of them. As a result, ES30-HV has less current ripples and higher system stability, and less interference to wireless video transmitters. In addition to excellent design, ES30-HV is also made of top quality electronic parts. It is composed of 3 Oz gold plated PDB, and genuine components from estimated suppliers such as STMicroelectronics of Switzerland, TDK of Japan, and AVX of USA. Excellent design, authentic electronic components, and good manufacturer process all together make the ESC an excellent product with great quality, reliability, and stability.

Features: 

  1. ESC is ultra-light and very little beyond imagination
  2. Powered by EFM8BB21 high-performance MCU
  3. Flashing with the latest BLHeli_S program with the combination of a special drive chip
  4. Consists of 3 Oz gold plated PCB
  5. Supports Dshot

Package Includes :

1 x Spedix ES30 HV 3-6s BLHeLi_S

Quick specs

Item Type
Brushless ESC
Firmware
BLHeli S
Burst Current (A)
40
Flow Continues
30A
Shipping Weight
0.012 kg
Shipping Dimensions
8 × 9 × 1 cm
See all specifications