Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A waterproof dual display meter that shows battery level as eight coloured bars plus live voltage from 12 to 60VDC. It identifies the system voltage automatically and wires straight across the battery terminals.

Key Highlights

  • Dual readout shows battery bars and live voltage together
  • Automatic identification across 12V to 60VDC systems
  • Eight-bar display with two red low-battery alert bars
  • Waterproof housing suits dashboards and outdoor installs
  • Reverse connection protection prevents damage on wiring errors
  • Low 5 to 15mA working current with 300ms refresh

Ideal For

  • Electric vehicle owners wanting a dashboard battery gauge
  • DIY builders wiring custom 12-60V DC systems
  • Technicians monitoring lead-acid and lithium packs
  • RC and robotics hobbyists checking pack voltage
  • Workshop users needing a quick DC voltage readout

Buying Tip

Measure your dashboard opening before ordering, since the meter needs a cut-out of roughly 50mm x 30mm and wires in parallel with the battery.

Elecvora expert review

Our verdict

A tidy, low-cost solution for anyone who wants battery level and voltage in one small waterproof gauge. The automatic 12-60V identification removes a common setup headache, though the display is basic rather than precision-grade.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines bar graph and voltmeter in one unit
  • Automatic voltage identification across 12-60VDC
  • Waterproof housing with reverse connection protection
  • Very low 5 to 15mA current draw
  • Simple parallel wiring with a short 150mm cable

Cons

  • Requires a 50mm x 30mm panel cut-out
  • Bar graph is an approximation, not a precise state-of-charge figure
  • No package contents beyond the meter itself

Best for

Dashboard battery monitoring on 12-60V electric vehicles and packs

Not ideal for

Precision laboratory voltage measurement or packs above 60VDC

Specifications

Model No. / NameVoltmeter
Voltage Rating12 to 60VDC
MaterialCopper + ABS Plastic
ColorBlack
Working Current (mA)5 to 15
Cable Length150
Operating Temperature (°C)-10 to 65
Refresh Speed (ms)About 300mS Once
Shipping Weight0.05 kg
Shipping Dimensions7 × 5 × 3 cm

What's in the box

  • 1 x 12-60V Dual Display Waterproof Automatic Identification Voltage Meter (Red)

Frequently Asked Questions

What voltage range does this meter support?
It is rated for 12 to 60VDC and identifies the connected system voltage automatically. Do not use it on packs outside that range.
How do I wire the meter?
Connect it directly across the battery terminals in parallel. Reverse connection protection prevents damage if polarity is momentarily wrong.
What do the coloured bars mean?
The upper display has eight bars: six green segments for normal charge and two red segments that indicate a low battery state near the bottom of the scale.
Which battery types can it monitor?
It suits lead-acid, lithium, polymer and nickel-metal hydride batteries, as well as general DC voltage measurement within its range.
What size opening do I need?
The dashboard cut-out should be approximately 50mm x 30mm so the meter fits properly.
How much current does the meter draw?
Working current is between 5 and 15mA, and the display refreshes roughly every 300ms.

Overview

The Generic Red 12-60V Dual Display Automatic Identification Waterproof Voltage Meter is a compact dashboard gauge that answers two questions at once: how much charge is left, and what voltage is the pack actually delivering. The upper half of the screen shows an eight-segment bar graph of remaining power, with six green bars and two red alert bars, while the lower half shows live voltage with an automatically shifting decimal point for a clearer reading.

Because the meter identifies the connected system voltage on its own, one unit covers 12V, 24V, 36V, 48V and 60V setups. The housing is waterproof, the working current is only 5 to 15mA, and the display refreshes about every 300ms.

Key Features

  • Double display: battery level bars and voltage are visible in a single glance.
  • Automatic identification: no manual range selection between 12V and 60VDC.
  • Colour-coded bars: two red segments flag a low battery state at the bottom of the scale.
  • Waterproof build: copper and ABS plastic construction for dashboard and outdoor mounting.
  • Reverse connection protection: incorrect polarity will not burn the meter.
  • Compact cable: 150mm lead length keeps wiring tidy behind the panel.

Specifications Explained

Voltage range

The 12 to 60VDC rating covers the common battery packs found on electric vehicles and small power systems. Stay within this window; the meter is not intended for higher-voltage packs.

Display and refresh

The eight-bar graph mirrors the power display style used on electric vehicles, so the reading feels familiar. A refresh of roughly 300ms means the voltage figure updates quickly enough to spot sag under load.

Current draw and temperature

Drawing only 5 to 15mA, the meter adds negligible drain to a pack. It is rated to operate between -10 and 65°C, which suits most vehicle dashboards and workshop environments.

Materials and cable

Copper conductors and an ABS plastic body keep the unit light and durable, while the 150mm cable is short enough for panel-adjacent wiring.

Compatibility and Requirements

The meter works with lead-acid batteries, lithium battery packs, polymer batteries, nickel-metal hydride batteries and other battery types within the 12 to 60VDC range. It also serves general voltage measurement tasks. Installation requires a dashboard cut-out of about 50mm x 30mm and a parallel connection to the battery terminals.

Typical Uses

  • Battery level gauge on electric cars, carts and similar vehicles
  • Voltage monitoring on lithium, polymer and nickel-metal hydride packs
  • Dashboard instrumentation for custom builds
  • General purpose voltage checking on DC equipment

What's in the Box

One 12-60V Dual Display Waterproof Automatic Identification Voltage Meter in red.

Quick specs

Model No. / Name
Voltmeter
Voltage Rating
12 to 60VDC
Material
Copper + ABS Plastic
Color
Black
Working Current (mA)
5 to 15
Cable Length
150
See all specifications