Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A red dual display voltage meter that reads 12 to 72VDC and automatically identifies the connected battery voltage. It shows charge level as eight coloured bars and voltage on a second display, with a waterproof housing and reverse connection protection.

Key Highlights

  • Dual display shows battery level bars and voltage together
  • Automatic voltage identification across 12 to 72VDC
  • Eight-bar level display with two red low-battery alert bars
  • Waterproof housing suits exposed dashboard mounting
  • Reverse connection protection prevents damage from swapped wiring
  • 300ms refresh rate keeps readings responsive

Ideal For

  • Electric vehicle owners wanting a dashboard battery gauge
  • DIY battery pack builders monitoring charge level
  • Workshop users checking DC voltages up to 72V
  • Small electric car and cart owners needing a simple level display
  • Makers adding a permanent voltage readout to a project panel

Buying Tip

Check that your battery system stays below 84V and that your dashboard can take a 50mm x 30mm cut-out before ordering.

Elecvora expert review

Our verdict

A simple, affordable way to add a permanent battery level and voltage readout to a dashboard. The automatic voltage identification and reverse connection protection make it forgiving to install.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual display shows level and voltage together
  • Automatic voltage identification across 12 to 72VDC
  • Waterproof housing for exposed mounting
  • Reverse connection protection

Cons

  • Requires a 50mm x 30mm cut-out for panel mounting
  • Only a short 150mm cable is provided
  • Not intended for systems above 84V

Best for

Electric vehicle and battery pack owners wanting a quick dashboard charge indicator

Not ideal for

High-voltage systems above 84V or precision laboratory measurement

Specifications

Model No. / NameVoltmeter
Voltage Rating12 to 72VDC
MaterialCopper + ABS Plastic
ColorBlack
Working Current (mA)5 to 15
Cable Length150
Operating Temperature (°C)-10 to 65
Refresh Speed (ms)300mS Once
Waterproof LevelYes
Shipping Weight0.05 kg
Shipping Dimensions7 × 5 × 3 cm

What's in the box

  • 1 x Red 72V Dual Display Automatic Identification Waterproof Voltage Meter

Frequently Asked Questions

What voltage range does this meter support?
It is rated for 12 to 72VDC and is intended for batteries below 84V. The meter automatically identifies the connected voltage.
How do I connect the meter?
Connect it directly to the battery terminals in parallel. Reverse connection protection means incorrect polarity will not burn the meter.
What do the coloured bars mean?
The upper display divides charge level into eight coloured bars. The last two red bars alert you to a low battery at around 10%.
Is the meter waterproof?
Yes, the housing is waterproof, making it suitable for dashboard and exposed panel installations.
What size opening do I need?
The meter requires a dashboard cut-out of 50mm x 30mm.
What is included in the package?
The package contains 1 x Red 72V Dual Display Automatic Identification Waterproof Voltage Meter.

Overview

This compact red voltage meter gives you two readings in one place: a battery level indicator and a live voltage readout. The upper section uses eight coloured bars to represent charge level, with the last two bars in red to flag a low battery condition. The lower section displays voltage, and the decimal point shifts automatically to keep the reading precise across the supported range.

The meter automatically identifies the voltage of the connected battery, which simplifies installation when you work with different packs. It is built from copper and ABS plastic, measures voltage from 12 to 72VDC, and draws only 5 to 15mA during operation. The housing is waterproof, so it can be mounted where splashes or damp conditions are a concern.

Key Features

  • Dual display: battery level bars and voltage shown at the same time for a quick, intuitive check.
  • Automatic identification: the meter recognises the connected voltage and adjusts the reading accordingly.
  • Low battery warning: the final two red bars indicate when charge drops to around 10%.
  • Reverse connection protection: incorrect polarity will not burn out the meter.
  • Waterproof construction: suitable for dashboard and exposed panel installations.
  • Fast refresh: readings update every 300ms.

Specifications Explained

Voltage range: the 12 to 72VDC rating covers common small electric vehicle and battery pack voltages, so one meter can serve several setups. Working current: at 5 to 15mA, the meter places minimal load on the battery it monitors. Refresh speed: a 300ms update cycle is fast enough to track changing voltage without a flickering display. Operating temperature: the -10 to 65°C range suits most vehicle dashboards and workshop environments. Cable length: the 150mm lead gives enough length for direct connection to nearby battery terminals.

Compatibility and Requirements

The meter is designed for battery systems from 12 to 72VDC and can be used with lithium, polymer, nickel-metal hydride and lead-acid batteries, as well as car and electric vehicle batteries. It connects in parallel to the battery terminals. A dashboard cut-out of 50mm x 30mm is required for panel mounting. The meter is intended for batteries below 84V.

Typical Uses

Use it as a fuel gauge on electric vehicles and battery cars running 12V, 24V, 36V, 48V, 60V or 72V packs. It also works for general voltage measurement on battery packs and other DC equipment where a permanent, at-a-glance readout is useful.

What's in the Box

1 x Red 72V Dual Display Automatic Identification Waterproof Voltage Meter.

Quick specs

Model No. / Name
Voltmeter
Voltage Rating
12 to 72VDC
Material
Copper + ABS Plastic
Color
Black
Working Current (mA)
5 to 15
Cable Length
150
See all specifications