Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 22mm square panel indicator with a built-in 7-segment LED display that reads AC voltages from 60 to 500V. It gives you an at-a-glance voltage readout on control panels and equipment chassis without extra meters.

Key Highlights

  • Combined 22mm indicator light and digital AC voltmeter
  • Reads AC voltages across a wide 60-500V range
  • Red 7-segment LED display with frosted front surface
  • Compact, lightweight plastic body at about 20g
  • Low power consumption for continuous panel monitoring
  • Square panel-mount format fits standard 22mm cutouts

Ideal For

  • Panel builders assembling control and distribution boards
  • Maintenance technicians monitoring AC equipment lines
  • Generator and motor control cabinet installers
  • Electronics hobbyists building test rigs
  • Anyone replacing 22mm panel indicator lamps with a voltage readout

Buying Tip

Confirm your circuit's AC voltage sits within the 60-500VAC range and that your panel has a 22mm cutout before ordering.

Elecvora expert review

Our verdict

A practical two-in-one part for panel builders who want voltage feedback without a separate meter. The wide AC range and standard 22mm format make it easy to standardise across different equipment.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Combines indicator light and digital voltmeter in one 22mm unit
  • Broad 60-500VAC range suits many AC circuits
  • Lightweight and compact for dense panel layouts
  • Low power draw for continuous monitoring

Cons

  • Only covers AC voltages within 60-500VAC
  • Requires a 22mm cutout and panel wiring
  • Limited technical detail supplied for this model

Best for

Control panels and equipment cabinets needing a simple local AC voltage readout

Not ideal for

Low-voltage DC circuits or precision laboratory measurement

Specifications

Voltage Rating60 to 500VAC
Model No. / NameAD16-22FSV
ColorRed
Length (mm)5
Weight (g)20g
Shipping Weight0.021 kg
Shipping Dimensions7 × 5 × 5 cm

What's in the box

  • 1 x Red AC60-500V 22mm AD16-22FSV Square Frosted Surface LED Voltmeter Indicator Light

Frequently Asked Questions

What voltage range does this indicator measure?
It is rated for AC voltages from 60 to 500VAC. Supplies outside that band are not within its stated operating range.
Is it AC or DC?
The rating is AC only, from 60 to 500VAC. It is not specified for DC circuits.
What size cutout does it need?
It is a 22mm square panel indicator, so it is intended for a matching 22mm panel opening.
What is included in the package?
The package contains one red AD16-22FSV square LED voltmeter indicator light.
How much does it weigh?
The unit weighs approximately 20g, with a shipping weight of about 0.021 kg.
How should I care for it?
Keep the frosted front clean and dry, and avoid exposing the plastic housing to solvents or excessive heat.

Overview

The AD16-22FSV is a square, 22mm panel-mount indicator that combines a red LED signal light with a digital AC voltmeter. Instead of adding a separate meter beside your indicator lamps, you get voltage feedback in the same footprint. The frosted front surface softens the glow while the 7-segment display shows the measured AC voltage, so an operator can confirm supply status and read the value from one spot on the panel.

With a voltage rating of 60 to 500VAC, this single model covers a broad spread of AC circuits, from lower-voltage control supplies up to higher-voltage equipment lines. The plastic housing is compact and weighs around 20g, keeping panel weight and depth to a minimum.

Key Features

  • Two functions in one unit: red indicator light plus digital voltage display.
  • Wide AC range: rated for 60 to 500VAC.
  • 7-segment display: clear numeric readout of the measured voltage.
  • Frosted surface: diffuses the red light for comfortable viewing.
  • Low power consumption: suited to continuous monitoring.
  • Compact build: 22mm square format, about 20g in weight.

Specifications Explained

Voltage rating

The 60-500VAC rating defines the working range of the meter. Circuits below or above that band fall outside the intended operating window, so check your supply against it before installation.

22mm square format

The 22mm size refers to the standard panel indicator format, which keeps the unit small enough for dense control layouts. The square shape gives a tidy, aligned look when mounted in rows.

Display and colour

The red 7-segment display presents voltage as digits rather than a simple on/off glow. A frosted front surface reduces glare and blends the light output across the face.

Weight and dimensions

At roughly 20g and with compact shipping dimensions of 7 x 5 x 5 cm, the unit is easy to store, ship and fit into tight panel spaces.

Compatibility and Requirements

This indicator is intended for AC circuits within the 60-500VAC range. It is a panel-mount component, so installation requires a suitable 22mm cutout and wiring to the circuit being monitored. No additional specifications such as connector type or lead length are stated for this model, so confirm your panel and wiring arrangement before ordering.

Typical Uses

  • Control panels and distribution boards needing local voltage indication
  • Generator sets, pumps and motor control cabinets
  • Equipment chassis and signal monitoring points
  • Workshop test rigs and hobby electronics projects
  • Replacement or upgrade of existing 22mm indicator lamps

What's in the Box

1 x Red AC60-500V 22mm AD16-22FSV Square Frosted Surface LED Voltmeter Indicator Light.

Quick specs

Voltage Rating
60 to 500VAC
Model No. / Name
AD16-22FSV
Color
Red
Length (mm)
5
Weight (g)
20g
Shipping Weight
0.021 kg
See all specifications