Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 60 A sensorless ESC built for 12S LiPo setups, with PWM and DSHOT300 support plus IP57 waterproofing. It keeps installation compact and lets you adjust settings by programming card or transmitter.

Key Highlights

  • 60 A continuous current for 12S LiPo power systems
  • Supports PWM and DSHOT300 control protocols
  • IP57 waterproof rating for wet and dusty conditions
  • Sensorless design with smooth, precise throttle response
  • Programmable via card or transmitter
  • Compact body rated to 80 degrees C maximum operating temperature

Ideal For

  • Multirotor builders running 12S LiPo power systems
  • FPV pilots who want DSHOT300 support
  • RC car drivers needing a waterproof 60 A ESC
  • RC boat hobbyists operating in wet conditions
  • Makers upgrading a sensorless drive setup

Buying Tip

Confirm your motor and battery are rated for 12S voltage and that your build includes a separate BEC, since this ESC does not provide one.

Elecvora expert review

Our verdict

A solid, configurable 60 A ESC for 12S builds that benefits from dual protocol support and IP57 protection. It is a sensible pick if you already run high-voltage sensorless setups and can supply receiver power separately.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 60 A continuous rating for 12S LiPo systems
  • PWM and DSHOT300 support in one unit
  • IP57 waterproofing for wet or dusty use
  • Compact footprint for tight installations
  • Programming via card or transmitter

Cons

  • No built-in BEC, so receiver power must come from elsewhere
  • Sensorless only, so sensored motors are not supported
  • No dimensions or weight for the unit itself are listed

Best for

High-voltage sensorless drone, car and boat builds that need a waterproof 60 A ESC

Not ideal for

Builders who need an integrated BEC or sensored motor support

Specifications

Continuous Discharge Current (A)60
BEC (Y/N)NO
ProtocolPWM, DSHOT300
Shipping Weight0.09 kg
Shipping Dimensions11 × 7 × 3 cm

What's in the box

  • 1 x Reflex Drive RD T-Series ESC 12S-60 A

Frequently Asked Questions

What battery setup is this ESC designed for?
It is built for 12S LiPo power systems. Make sure your motor, wiring and connectors are also rated for that voltage class.
Does this ESC include a BEC?
No. The RD T-Series ESC has no built-in BEC, so you will need a separate power source for your receiver and servos.
Which control protocols does it support?
It works with PWM and DSHOT300 signals, so it can be used with a range of receivers and flight controllers.
How do I change the ESC settings?
Settings can be adjusted with a programming card or from your transmitter, depending on your equipment.
Is it waterproof?
Yes, it carries an IP57 waterproof rating, which protects against dust and water ingress. The maximum operating temperature is 80 degrees C.
What is included in the package?
The package contains one Reflex Drive RD T-Series ESC 12S-60 A. Confirm the quantity you need before ordering.

Overview

The Reflex Drive RD T-Series ESC 12S-60 A is a sensorless speed controller aimed at builders running 12S LiPo packs. It carries a 60 amp continuous discharge rating, giving it the current headroom needed for steady power delivery in demanding setups. The unit is compact enough to fit into tight spaces, which matters when you are working inside an airframe, hull or chassis with limited room.

Because it accepts both PWM and DSHOT300, the ESC can be paired with a broad range of receivers and flight controllers. Settings can be changed with a programming card or from a transmitter, so you are not locked into a single tuning method.

Key Features

  • 12S LiPo ready: designed around high-voltage 12S battery setups.
  • 60 A continuous current: handles sustained loads up to the rated figure.
  • Dual protocol support: works with PWM and DSHOT300 signals.
  • IP57 waterproofing: resists water ingress and dust in real-world conditions.
  • Sensorless operation: simple wiring with no sensor harness to route.
  • Field-friendly programming: adjust parameters with a card or your transmitter.

Specifications Explained

The 60 A continuous discharge rating is the headline figure. It tells you how much current the ESC is built to carry over time, so match your motor and propeller or drivetrain load to stay within that limit. The 12S LiPo design means the controller is intended for high-voltage packs, so confirm your battery, motor and wiring are all rated for that voltage before connecting anything.

Protocol support covers PWM and DSHOT300. PWM is the traditional throttle signal, while DSHOT300 is a digital protocol used on many modern flight controllers. Having both means the ESC can be reused across different builds.

IP57 indicates protection against dust and water ingress, which is useful on wet ground, near splashes or in damp conditions. The 80 degrees C maximum operating temperature is the ceiling to keep in mind when planning airflow around the unit.

Compatibility and Requirements

This ESC is intended for 12S LiPo power systems and sensorless motors. It has no built-in BEC, so your model will need a separate power source for the receiver and servos. Plan your wiring around PWM or DSHOT300 output from your controller, and use a programming card or transmitter-based method to change settings. Check that your motor, battery and connectors suit the 60 A continuous rating and 12S voltage class.

Typical Uses

The RD T-Series suits multirotor and drone builds, RC cars and RC boats. Its waterproof rating and compact size make it a natural fit for models that see splashes, dust or tight installation spaces. Use it where you need a configurable, sensorless ESC with digital or analogue throttle support.

What's in the Box

The package contains one Reflex Drive RD T-Series ESC 12S-60 A. Check the listing quantity at checkout if you need multiple units for a build.

Quick specs

Continuous Discharge Current (A)
60
BEC (Y/N)
NO
Protocol
PWM, DSHOT300
Shipping Weight
0.09 kg
Shipping Dimensions
11 × 7 × 3 cm
See all specifications