
1 / 3 · Click to enlarge
AI Summary
The REX-C410 is a 220VAC digital thermostat with K-type thermocouple input and relay/SSR output for controlling temperatures from 0 to 400°C. Its ±0.5% FS accuracy and 0.5-second sampling make it a reliable choice for ovens, incubators and other heating projects.
Key Highlights
- K-type thermocouple input for 0–400°C measurement
- Dual 7-segment LED display shows temperature clearly
- Relay/SSR output for flexible load switching
- ±0.5% FS accuracy with 14-bit resolution
- Fast 0.5-second sampling for responsive control
- 220VAC 50/60Hz supply in a compact 112 x 95 mm case
Ideal For
- Laboratory technicians needing precise temperature control
- DIY enthusiasts building incubators or ovens
- Industrial maintenance teams replacing controllers
- Automation hobbyists working on heating projects
Buying Tip
Confirm that your thermocouple is K-type and that your load can be switched by a relay or SSR before ordering.
Elecvora expert review
Our verdict
The REX-C410 offers solid temperature control fundamentals in a compact, easy-to-install package. Its K-type input, relay/SSR output and fast sampling make it a practical choice for many heating projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear dual LED display
- Relay/SSR output flexibility
- Fast 0.5-second sampling
- Tool-free installation
Cons
- Thermocouple not included
- Only 220VAC power supported
- Limited to 0–400°C range
Best for
Ovens, incubators and lab heating control
Not ideal for
Applications requiring higher than 400°C or non-K-type sensors
Specifications
| Model No. / Name | REX C410 |
|---|---|
| Input Type | K-Type Thermocouple |
| Display Type | Dual 7-Segment LED Display |
| Power Supply Voltage (V) | 220VAC, 50/60Hz |
| Control Mode | PID / ON-OFF |
| Temperature Range | 0–400°C |
| Measuring Accuracy | ±0.5% FS |
| Resolution | 14-bit |
| Sampling Rate | 0.5 Sec |
| Length (mm) | 112 |
| Width (mm) | 95 |
| Weight (g) | 266 |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.311 kg |
| Shipping Dimensions | 11 × 10 × 6 cm |
What's in the box
- 1 x REX-C410 Digital Thermostat Temperature Controller SSR Output
- 1 x Clip
Frequently Asked Questions
What type of thermocouple does the REX-C410 use?
Can I use this controller with a 110V power supply?
Is a solid-state relay included?
What is the maximum temperature it can control?
How do I install the controller?
Does it support both PID and ON-OFF control?
Overview
The REX-C410 is a digital temperature controller built for straightforward thermal regulation. It reads a K-type thermocouple and displays the measured value on a dual 7-segment LED display, making it easy to monitor temperature during operation. With a control range of 0–400°C and ±0.5% FS measuring accuracy, it provides stable readings for heating and automation tasks. The controller runs on 220VAC at 50/60Hz and offers relay/SSR output, so it can switch a variety of heating loads. Its compact body measures 112 mm in length and 95 mm in width, and the tool-free installation design simplifies replacement or upgrades.
Key Features
- K-type thermocouple input: compatible with standard K-type probes for temperature sensing.
- Dual LED display: shows process value and setpoint clearly.
- Relay/SSR output: supports switching of external relays or solid-state relays for load control.
- High resolution: 14-bit measurement resolution for fine temperature steps.
- Fast sampling: 0.5-second cycle keeps the display and control response current.
- Tool-free replacement: easy to install or swap without special tools.
Specifications Explained
Temperature range and accuracy: The 0–400°C range suits many low-to-medium temperature processes. The ±0.5% FS accuracy means the maximum error is a small percentage of the full scale, helping you trust the reading within that band. The 14-bit resolution allows the controller to distinguish fine changes in sensor input.
Input and output: The K-type thermocouple input is a common sensor type, so finding a compatible probe is straightforward. Relay/SSR output gives you the choice of driving a mechanical relay or a solid-state relay, depending on your load and switching needs.
Power and speed: The 220VAC 50/60Hz supply is standard in many regions. A 0.5-second sampling rate means the controller updates its measurement twice per second, which is adequate for most heating control loops.
Compatibility and Requirements
To use the REX-C410, you need a K-type thermocouple, a 220VAC 50/60Hz power source, and a load that is switched via the relay/SSR output. The controller does not include a thermocouple or SSR, so these must be sourced separately. Ensure your wiring and load ratings are appropriate for your application.
Typical Uses
This controller is suitable for ovens, incubators, laboratory equipment, heaters and DIY automation projects where accurate temperature control in the 0–400°C range is required. It can also be used in small-scale industrial processes and test rigs.
What's in the Box
Package includes: 1 x REX-C410 Digital Thermostat Temperature Controller SSR Output, 1 x Clip.
Quick specs
- Model No. / Name
- REX C410
- Input Type
- K-Type Thermocouple
- Display Type
- Dual 7-Segment LED Display
- Power Supply Voltage (V)
- 220VAC, 50/60Hz
- Control Mode
- PID / ON-OFF
- Temperature Range
- 0–400°C













