Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched 433MHz AM transmitter and receiver pair for adding one-way wireless data links to Arduino and Raspberry Pi projects. The receiver's -105dB sensitivity and the transmitter's 10mW output support ranges from 20 to 200 metres.

Key Highlights

  • Matched 433MHz transmitter and receiver pair for one-way wireless links
  • Receiver model XY-MK-5V with 5VDC operation and 4mA quiescent current
  • Receiver sensitivity of -105dB for weak-signal reception
  • Transmitter output of 10mW with 4KB/s AM transfer rate
  • Launch distance of 20-200 metres depending on supply voltage
  • Compact boards measuring 30 x 14 x 7mm (receiver) and 19 x 19mm (transmitter)

Ideal For

  • Arduino hobbyists adding a simple one-way wireless link
  • Raspberry Pi owners building remote control projects
  • Students learning RF communication basics
  • Makers prototyping remote switching or sensor telemetry

Buying Tip

Check that your project only needs one-way communication, because this kit sends data from transmitter to receiver and cannot receive replies.

Elecvora expert review

Our verdict

A practical, low-cost entry point for one-way 433MHz wireless projects. It is best suited to simple data links where speed and bidirectional communication are not required.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Matched transmitter and receiver pair ready to use
  • Simple three-pin connections for breadboarding
  • Good receiver sensitivity for weak signals
  • Adjustable transmitter voltage for range tuning

Cons

  • One-way communication only
  • Low 4KB/s transfer rate limits data-heavy applications
  • Range depends heavily on antenna and supply voltage

Best for

Simple one-way remote control and sensor links with Arduino or Raspberry Pi

Not ideal for

Projects needing two-way communication or high-speed data transfer

Specifications

Item TypeKit
Operating Frequency (MHz)433
Rated Voltage (VDC)5
Receiver ParameterAs per below
Model No. / NameXY-MK-5V
Quiescent Current4
Receiver Sensitivity-105 dB
Dimensions (L x W x H) mm30 x 14 x 7
Transmitter ParameterAs per below
Launch Distance (m)20-200
Operating ModeAM
Transfer rate (KB/sec)4
Transmitting power (mW)10
Transmitting frequency433
Shipping Weight0.085 kg
Shipping Dimensions4 × 4 × 3 cm

What's in the box

  • 1 x RF Transmitter Receiver Module 433MHz Wireless Link Kit for Arduino

Frequently Asked Questions

Can this kit send and receive data at the same time?
No. The transmitter and receiver form a one-way link, so data only travels from the transmitter to the receiver. For two-way communication you would need two pairs on different frequencies.
What supply voltage does the receiver need?
The XY-MK-5V receiver requires 5VDC. The transmitter accepts 3.5V to 12V, and higher voltages can increase the launch distance.
How far can the signal reach?
The stated launch distance is 20 to 200 metres, depending on the supply voltage and antenna setup. Adding a 25cm wire antenna to each board helps achieve the longer end of that range.
Is this compatible with Arduino and Raspberry Pi?
Yes, the kit is compatible with Arduino and Raspberry Pi 2 / B / B+ / A+ boards as well as other microcontrollers that can drive the DATA, VCC and GND pins.
What is included in the package?
The package contains one RF transmitter and one receiver module. Antennas, jumper wires and microcontrollers are not included.
Do I need to add an antenna?
An external antenna is recommended for better range. A 25cm length of ordinary multi-core or single-core wire can be used for this purpose.

Overview

This RF transmitter and receiver kit provides a simple, low-cost way to add a one-way wireless data link to your electronics projects. The pair operates at 433MHz: the receiver module is the XY-MK-5V, and the transmitter is a matched AM unit. Because the two boards are tuned to the same frequency, data sent by the transmitter is picked up by the receiver without any pairing procedure.

The kit is aimed at makers, students and hobbyists working with Arduino, Raspberry Pi or other microcontrollers. Both modules are small enough to fit on a breadboard, making them convenient for prototyping remote control and sensor telemetry ideas.

Key Features

  • Matched 433MHz pair: transmitter and receiver are tuned to work together out of the box.
  • 5VDC receiver: the XY-MK-5V module draws about 4mA when idle and offers -105dB sensitivity.
  • 10mW AM transmitter: supports a transfer rate of 4KB/s over a launch distance of 20-200 metres.
  • Compact dimensions: receiver measures 30 x 14 x 7mm; transmitter measures 19 x 19mm.
  • Breadboard friendly: simple pinout with DATA, VCC and GND connections.

Specifications Explained

Operating frequency (433MHz): this is a licence-free band in many regions, which makes the kit convenient for short-range hobby projects. Both boards must stay on the same frequency to communicate.

Receiver sensitivity (-105dB): a lower dB figure indicates better ability to detect weak signals, so this receiver can pick up transmissions at the edge of its range.

Launch distance (20-200m): the achievable range depends on the supply voltage and the antenna used. The datasheet notes that results vary with voltage.

Transfer rate (4KB/s): the link is intended for low-speed data such as switch states, short commands and basic sensor readings, not for streaming audio or video.

Quiescent current (4mA): the receiver's idle draw is modest, which helps when powering from a small supply.

Compatibility and Requirements

The kit is compatible with Arduino and Raspberry Pi 2 / B / B+ / A+ boards as well as other microcontrollers. The receiver requires a 5VDC supply. The transmitter operates from 3.5V to 12V, and higher voltages can extend the launch distance. An external antenna can be added using a 25cm length of ordinary multi-core or single-core wire. Note that this is a one-way link: data travels from transmitter to receiver only.

Typical Uses

  • Remote switching of lights or relays from a microcontroller
  • Simple wireless sensor data links
  • DIY remote control projects with Arduino or Raspberry Pi
  • Short-range telemetry for hobby electronics

What's in the Box

1 x RF Transmitter Receiver Module 433MHz Wireless Link Kit for Arduino.

Quick specs

Item Type
Kit
Operating Frequency (MHz)
433
Rated Voltage (VDC)
5
Receiver Parameter
As per below
Model No. / Name
XY-MK-5V
Quiescent Current
4
See all specifications