Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

RS2205 2300KV brushless motor for 5-inch FPV racing quads, featuring 12N14P construction, N52 magnets, and active cooling fins. It delivers up to 1024g thrust on 3S-4S LiPO with a 30-40A ESC, and this is the CCW rotation version.

Key Highlights

  • 2300KV brushless motor tuned for 5-inch FPV racing quads
  • 12N14P stator with N52 neodymium magnets for strong torque
  • Active cooling fins move air through the motor coils
  • 5mm shaft and 30g lightweight design
  • Up to 1024g maximum thrust on 3S-4S LiPO
  • CCW rotation with silver cap; mounting screws included

Ideal For

  • FPV racing pilots building a 5-inch quad
  • Beginners learning FPV flight with QAV250 or QAV300 frames
  • Pilots needing a reliable CCW replacement motor
  • Makers building a budget-friendly racing multicopter

Buying Tip

Check your frame and prop rotation direction: this is the CCW motor, so pair it with a CW motor for counter-rotating setups.

Elecvora expert review

Our verdict

The RS2205 2300KV is a dependable, budget-friendly motor for 5-inch FPV quads, with cooling fins and quality magnets that suit beginners and casual racers. It delivers good thrust and smooth operation, though it lacks premium bearings and requires soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Active cooling fins help manage heat
  • N52 magnets and Japanese bearings for smooth power
  • Lightweight at 30g with 5mm shaft
  • Affordable for building or repairs

Cons

  • Requires soldering to ESC
  • Only CCW rotation in this version; need CW for pairs
  • No warranty or performance data beyond given specs

Best for

FPV beginners and budget racers building 5-inch quads

Not ideal for

Pilots needing high-end competition motors or plug-and-play installation

Specifications

Motor KV (RPM/V)2300 KV
Motor TypeBrushless Motor
Compatible LiPO Batteries3S to 4S
Nut TypeCW
Maximum Thrust (gm)1024
Required ESC (A)30-40
Framework12N14P
Shaft Diameter5 mm
Compatible Prop (inch)5
Length (mm)27.9
Width (mm)27.9
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions6 × 6 × 5 cm

What's in the box

  • 1 x RS2205 2300KV Brushless Motor
  • 1 x Mounting Screw Set

Frequently Asked Questions

What battery should I use with this motor?
It is compatible with 3S to 4S LiPO batteries. Choose a battery that matches your ESC and frame setup.
What ESC do I need?
A 30-40A ESC per motor is recommended. Make sure your ESC supports the current draw of your setup.
Does this motor come with a propeller?
No, the package includes only the motor and a mounting screw set. You will need to purchase 5-inch props separately.
Is this motor CW or CCW?
This is the CCW (counter-clockwise) rotation version. For a full quad, you will need a mix of CW and CCW motors.
How much thrust does it produce?
The maximum thrust is 1024g, depending on the propeller and battery used.
Do I need to solder the motor?
Yes, the motor wires must be soldered to your ESC. There are no plug-and-play connectors included.

Overview

The RS2205 2300KV is a brushless DC motor designed for 5-inch FPV racing multicopters, including the QAV250 and QAV300. It combines a 12N14P stator, N52 neodymium magnets, and Japanese bearings in a compact 30g package. The motor features active cooling fins that draw air from the base through the coils, helping to control temperature during high-throttle runs. This version rotates counter-clockwise (CCW) and has a silver cap. It is a solid, affordable choice for pilots building or maintaining a racing quad.

Key Features

  • High-strength N52 neodymium magnets for efficient power delivery.
  • Active cooling fins that move air through the motor as it spins.
  • Low center of gravity and lightweight design at just 30g.
  • Japanese bearings for smooth, reliable operation.
  • Anti-off U-ring for secure and stable performance.

Specifications Explained

The 2300KV rating indicates the motor turns 2300 RPM per volt applied, which is well suited to 5-inch propellers on 3S to 4S LiPO batteries. The 12N14P configuration (12 stator arms, 14 magnets) provides a good balance of torque and smoothness. A 5mm shaft fits standard 5-inch props, and the 30-40A ESC requirement gives you headroom for aggressive flying. Maximum thrust is 1024g, so a typical quad will have ample power for racing and freestyle. The motor measures 27.9mm in diameter and length, and weighs 30g.

Compatibility and Requirements

This motor works with 3S to 4S LiPO batteries and 5-inch propellers. It requires a 30-40A electronic speed controller (ESC) per motor. The 5mm shaft accepts props with a matching bore. Note that this is the CCW rotation version; a CW version is also available for counter-rotating setups. Mounting screws are included, but you will need to solder the motor wires to your ESC.

Typical Uses

Ideal for 5-inch FPV racing quads such as the QAV250 and QAV300, this motor suits beginners learning the basics of FPV flight as well as pilots who need a reliable replacement motor. Its cooling design helps during sustained high-throttle sessions, making it a practical choice for practice and casual racing.

What's in the Box

  • 1 x RS2205 2300KV brushless motor
  • 1 x mounting screw set

Quick specs

Motor KV (RPM/V)
2300 KV
Motor Type
Brushless Motor
Compatible LiPO Batteries
3S to 4S
Nut Type
CW
Maximum Thrust (gm)
1024
Required ESC (A)
30-40
See all specifications