
1 / 6 · Click to enlarge
At a glance
Made by RTU, this relay module is a good fit for makers, students and electronics hobbyists.
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Overview
The RTU RS232/TTL UART Modbus Rtu 4 Ch Relay Module Communication 4-Channel 7-24V Relay Module, made by RTU, is listed in our relay module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Description:
1. Onboard mature and stable 8bit MCU and MAX3232 level conversion chip;
2. Communication protocol: support standard Modbus RTU protocol;
3. Communication interface: support RS232/TTL UART interface;
4. Communication baud rate 4800/9600/19200, default 9600bps, support power-off saving;
5. Optocoupler input signal range: DC3.3-24V (this input cannot be used for relay control);
6. Output signal: relay switch signal, support manual, flash-on, flash-off mode, flash-on/flash-off delay base is 0.1 S, the maximum flash-on/flash-off time can be set to 0xFFFF*0.1S=6553.5S;
7. Device address: range 1-255, default 255, support power-off saving;
8. Baud rate, input signal, relay status, device address can be read using software/commands;
9. Onboard 4-way 5V, 10A/250V AC 10A/30V DC relay, can be continuously closed 100,000 times, with diode discharge protection, short response time;
10. onboard relay switch indicator;
11. power supply voltage: DC7-24V,;
12. board size: 93*87mm, board weight: 92g;
Specifications:
Product Name: 4CH Modbus Relay Module
Work voltage: DC 7V~24V
Load: AC 250V 10A or DC 30V 10A
Ptocoupler Input Signal: DC 3.3V~24V
Set address: 1~255
Interface: RS232/TTL UART
Control channel: 4channel
Baud Rate: 4800/9600/19600bps(Default 9600bps)
Weight: 92g
Size: 93*87mm
Features:
1. Support Modbus RTU protocol;
2. Support RS232/TTL UART interface
3. Output indicator in multi mode;
4. Address can be set
5. Support input reverse connection protection
6. Relay switch output;7.Support parameter memory function
Package includes:
1 x 4 CH Relay Module
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.






Cheaper Alternatives
1/2/4/6/8/16 Relay Module 8 Channel with Optocoupler Relay Output 1 2 4 6 Relay Module 8 Channels Low Level Trigger 5/12/24V
Smart Wifi Switch Relay Module eWeLink APP Remote Control DC5V DC12V Wireless Delay Self-Lock Smart Home Automation Relay
12V DC Infrared Remote Control Full-function Precision Delay Cycle Timing Relay
Upgrade Options
YX850 Power Failure Automatic Switching Standby Battery Lithium Battery Module 5

ESP32-S3 Industrial 6-Channel RS485 Relay Module IOT WiFi Bluetooth Onboard Pico HAT Interface with Built-In Protection Circuits

4Pcs 12V 16CH Channel Relay Module With Optocoupler For PIC AVR DSP ARM









