Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 500 mm quadcopter frame kit in carbon fiber and polyamide nylon with landing gear and an integrated power distribution board. Solder your ESCs straight to the frame for a cleaner, faster build.

Key Highlights

  • 500 mm wheelbase quadcopter frame kit for custom builds
  • Carbon fiber and polyamide nylon construction at about 470 g
  • Thick molded arms with support ridges for stability in forward flight
  • Integrated PCB for direct ESC soldering, no separate PDB needed
  • Pre-threaded brass sleeves and large tabs for clean component mounting
  • Landing gear included for stable takeoff and landing

Ideal For

  • Hobbyists building a custom 500 mm class quadcopter
  • Makers who prefer soldering ESCs directly to an integrated PCB
  • Club and educational projects needing a repairable frame
  • Builders moving up from smaller frames who want more deck space
  • Pilots who want landing gear included in the airframe kit

Buying Tip

Confirm your motor mount pattern and propeller size against the 500 mm frame layout before buying, and budget for motors, ESCs, a flight controller, radio gear and a battery, since none are included.

Elecvora expert review

Our verdict

The S500 is a sensible, budget-friendly frame kit for builders who want a 500 mm platform with an integrated power board and landing gear included. It rewards careful assembly rather than offering plug-and-play convenience.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated PCB simplifies power wiring and removes the need for a separate PDB
  • Carbon fiber and polyamide nylon combination is tough yet light at about 470 g
  • Reinforced arms with support ridges and pre-threaded brass sleeves
  • Landing gear and large mounting tabs included

Cons

  • Kit only, so motors, ESCs, flight controller, radio and battery are not included
  • Requires soldering and a full build, which is not suitable for beginners wanting ready-to-fly
  • No published maximum propeller size or payload figure, so builders must verify fit themselves

Best for

Hobbyist and maker scratch builds in the 500 mm quadcopter class

Not ideal for

Buyers wanting a ready-to-fly drone with no assembly or soldering

Specifications

Item TypeKit
Model No. / NameS500
Drone TypeQuadcopter
ColorBlack
MaterialCarbon Fiber + Polyamide Nylon
Wheelbase500 mm
Weight (g)470
Shipping Weight0.9 kg
Shipping Dimensions35 × 10 × 5 cm

What's in the box

  • 1 x S500 Carbon Fiber Quadcopter Drone Frame Kit

Frequently Asked Questions

Is the S500 a complete drone?
No. It is a frame kit. Motors, ESCs, a flight controller, radio equipment, battery and propellers must be purchased separately.
What does the integrated PCB do?
It provides the power distribution layer built into the frame, so you solder ESC power leads directly to it instead of adding a separate power distribution board.
What is the wheelbase and weight?
The wheelbase is 500 mm and the frame weighs approximately 470 g before electronics and battery are added.
What materials is the frame made from?
The frame uses carbon fiber together with polyamide nylon for the molded arms.
Does it include landing gear?
Yes, landing gear is supplied with the kit, which helps keep the frame clear of the ground.
How should I care for the frame?
Inspect the arms and mounting points after hard landings, check fastener tightness periodically, and replace any damaged arm rather than flying with a compromised structure.

Overview

The S500 is a quadcopter frame kit aimed at builders who prefer to assemble their own airframe rather than buy a finished drone. It combines a carbon fiber main structure with molded polyamide nylon arms, giving a 500 mm wheelbase platform that weighs roughly 470 g. Landing gear is included, so the frame can sit stable on the bench during assembly and on the ground once complete.

The design is deliberately practical: arms are thickly molded and reinforced with support ridges, which helps stability and supports faster forward flight. An integrated printed circuit board removes the need for a separate power distribution board, keeping wiring short and the deck tidy.

Key Features

  • Hybrid materials: carbon fiber and polyamide nylon balance rigidity with impact tolerance.
  • Reinforced arms: molded arms with support ridges add stiffness at the motor mounts.
  • Integrated PCB: solder ESCs directly to the frame instead of adding a PDB.
  • Pre-threaded brass sleeves: fasteners seat reliably during repeated assembly.
  • Large mounting tabs: space for a camera and other components.
  • Landing gear included: keeps the frame clear of the ground.

Specifications Explained

500 mm wheelbase describes the diagonal span between motor centres. It defines the class of build and the propeller sizes you can plan around, and it is larger than compact racing frames, so expect a roomier deck for electronics.

470 g frame weight is the bare structure, before motors, ESCs, flight controller, battery, camera or propellers. Keep that in mind when estimating all-up weight for your build.

Carbon fiber plus polyamide nylon means a stiff main plate paired with molded arms that tolerate hard landings better than brittle alternatives. The arms can be replaced individually if damaged.

Integrated PCB is the power distribution layer built into the frame. You solder ESC power leads to it, which shortens wiring runs and removes a component from the stack.

Compatibility and Requirements

This is a kit, not a ready-to-fly aircraft. You will need to source your own motors, ESCs, flight controller, radio system, battery, propellers and any camera or payload separately. Because the frame uses an integrated PCB for power distribution, plan your ESC wiring around soldering to the frame. Check component dimensions against the 500 mm frame layout before ordering.

Typical Uses

The S500 suits hobbyist scratch builds, educational and club projects, and general-purpose multirotor platforms where a repairable frame matters more than a sealed consumer body. It is also a sensible choice for builders who enjoy soldering and tuning as part of the hobby.

What's in the Box

  • 1 x S500 Carbon Fiber Quadcopter Drone Frame Kit

Quick specs

Item Type
Kit
Model No. / Name
S500
Drone Type
Quadcopter
Color
Black
Material
Carbon Fiber + Polyamide Nylon
Wheelbase
500 mm
See all specifications