
1 / 3 · Click to enlarge
AI Summary
A protected 3S2P Samsung 18650-25R li-ion pack rated 11.1V 5000mAh with an 8C discharge figure, BMS and Amass T plug. It packs 12V-class power into a 70 x 45 mm, roughly 390 g case for drones, RC models and portable projects.
Key Highlights
- 3S2P Samsung INR 18650-25R A Grade cells
- 11.1V nominal with 5000mAh capacity
- 8C discharge rating for high-current draws
- Built-in BMS for pack protection
- 4-pin JST XH and DC jack female charging
- Amass Nylon T discharge connector
Ideal For
- FPV and RC builders using 3S li-ion power
- Drone hobbyists wanting a protected pack
- Makers building portable power projects
- Engineers prototyping compact enclosures
- Robotics and test-rig builders
Buying Tip
Check that your charger supports 3S lithium-ion and that your device uses an Amass T plug before ordering, since charging and discharge connectors are separate on this pack.
Elecvora expert review
Our verdict
A tidy, protected 3S2P li-ion pack that saves build time and brings Samsung A Grade cells plus an 8C figure to 12V-class projects. The separate charge and discharge connectors are a plus for wiring clarity, provided your charger and device match them.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Samsung A Grade INR 18650-25R cells
- Integrated BMS protection
- 8C discharge figure for demanding loads
- Compact 70 x 45 mm, roughly 390 g body
- Clear charge and discharge connectors
Cons
- Charger and device connectors must match the supplied plugs
- BMS sits in the current path, so very high continuous draws need checking
- No capacity or runtime figures are stated for specific devices
Best for
RC, drone and portable power builds using a 3S li-ion supply
Not ideal for
Devices needing a different cell chemistry or connector type
Specifications
| Nominal Voltage (V) | 11.1 |
|---|---|
| Nominal Capacity (mAh) | 5000 mAh |
| BMS (Y/N) | Y |
| Charge Connector | 4 Pin JST XH, DC Jack Female |
| Discharge Port | Amass Nylon T |
| Length (mm) | 70 |
| Width (mm) | 45 |
| Weight (g) | ~390 |
| Model Series | 3 |
| Shipping Weight | 0.435 kg |
| Shipping Dimensions | 13 × 12 × 9 cm |
What's in the box
- 1 x Samsung A Grade INR 18650-25R 11.1V 5000mAh 8C 3S2P Li-Ion Battery Pack
Frequently Asked Questions
What voltage does this pack deliver?
How do I charge it?
What connector is used for discharge?
Does it include a protection circuit?
How big and heavy is the pack?
What is in the box?
Overview
This Samsung A Grade INR 18650-25R pack is a ready-assembled 3S2P lithium-ion battery delivering 11.1V nominal and 5000mAh. It is built for people who want the energy density of 18650 cells without designing a pack from scratch. The pack measures 70 mm long and 45 mm wide and weighs approximately 390 g, so it fits neatly into compact airframes, handheld devices and prototype enclosures. An onboard BMS watches over the cells, and the pack arrives with separate charging and discharge connections already fitted.
Key Features
- Samsung A Grade cells: the pack uses INR 18650-25R cells in a 3S2P arrangement.
- Protected design: a built-in BMS is included to manage the pack.
- Dual connectors: a 4-pin JST XH plus DC jack female for charging, and an Amass Nylon T plug for discharge.
- Compact footprint: 70 x 45 mm with a weight of about 390 g.
- 8C discharge figure: useful headroom for RC and drone loads.
Specifications Explained
11.1V nominal means three lithium-ion cells in series, so the pack behaves like a standard 12V-class supply and charges to a higher full-charge voltage than its nominal figure. 5000mAh is the pack capacity in a 3S2P layout, where two parallel cell groups share the current load. 8C describes the discharge rate relative to capacity, which is what makes this pack interesting for models that pull short bursts of high current. The BMS is the protection layer between the cells and your device. Charge and discharge are separated: the 4-pin JST XH and DC jack female are the charging side, while the Amass Nylon T is the discharge side, so plan your wiring around both.
Compatibility and Requirements
Use a charger suited to a 3S lithium-ion pack and connect it through the 4-pin JST XH or DC jack female. Your model or device should accept an 11.1V nominal lithium-ion supply and an Amass Nylon T discharge plug. Confirm that your enclosure or airframe has room for the 70 x 45 mm body and can carry roughly 390 g. Because this is a protected pack, the BMS sits in the current path, so check your device's current demand against the pack's 8C figure before committing.
Typical Uses
Drone and RC builders use packs like this where a 3S li-ion supply is preferred over li-po. It also suits portable power projects, test rigs, robotics prototypes and custom enclosures where a compact, protected pack with defined connectors saves assembly time.
What's in the Box
- 1 x Samsung A Grade INR 18650-25R 11.1V 5000mAh 8C 3S2P Li-Ion Battery Pack







Quick specs
- Nominal Voltage (V)
- 11.1
- Nominal Capacity (mAh)
- 5000 mAh
- BMS (Y/N)
- Y
- Charge Connector
- 4 Pin JST XH, DC Jack Female
- Discharge Port
- Amass Nylon T
- Length (mm)
- 70


















