Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 45 cm adapter cable that links a 22-pin SATA SSD or HDD to a USB 3.0 port, with a 5.5 mm DC jack for 12V power when using 3.5 inch drives. It enables plug-and-play access to bare drives at up to 5 Gbps.

Key Highlights

  • 22-pin SATA connector to USB 3.0 plug
  • Up to 5 Gbps data transfer rate
  • 45 cm cable for flexible positioning
  • 5.5 mm DC female jack for 12V power
  • Works with 2.5 and 3.5 inch drives
  • Plug and play with hot swapping support

Ideal For

  • Users recovering files from a removed laptop drive
  • Technicians cloning or testing bare SATA drives
  • Anyone backing up data to a spare SSD or HDD
  • People moving large files between computers
  • Hobbyists who need temporary external drive access

Buying Tip

Check that your 3.5 inch drive setup includes a separate 12V power supply with a 5.5 mm plug, because the cable alone will not power a desktop-class hard disk.

Elecvora expert review

Our verdict

A straightforward, low-cost way to bring a bare SATA drive back into service over USB. It covers both 2.5 and 3.5 inch drives, provided you supply the 12V power that larger drives need.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports both 2.5 and 3.5 inch 22-pin SATA drives
  • USB 3.0 with up to 5 Gbps interface speed
  • Includes a 5.5 mm DC jack for external 12V power
  • Plug and play with hot swapping
  • Compact 45 cm cable

Cons

  • Power supply not included
  • Real transfer speed limited by the drive
  • Open adapter design offers no enclosure protection

Best for

Temporary access, backup, and cloning of bare SATA drives

Not ideal for

Permanent external storage or use without a 12V supply on 3.5 inch drives

Specifications

ManufacturerGeneric
Cable Length45
Power Supply Voltage (V)12V
No. of Pins22
Model No. / NameInterface Cable
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x SATA 3.0 to USB 3.0 hard disk cable, 45 cm

Frequently Asked Questions

Does this cable work with both 2.5 and 3.5 inch drives?
Yes. It is listed for 2.5 and 3.5 inch 22-pin SATA SSD and hard disk drives.
Do I need a separate power supply?
For a 3.5 inch drive, yes. The adapter has a 5.5 mm DC female jack for a 12V supply, which is not included. 2.5 inch drives generally draw power from the USB connection.
What transfer speed can I expect?
The adapter supports up to 5 Gbps at the USB 3.0 interface. Actual speed depends on the drive and the USB port used.
Which operating systems are supported?
The product data states support for all versions of Windows and iOS.
Is the cable plug and play?
Yes. It is described as plug and play with hot swapping support, so no driver installation is required.
How long is the cable?
The cable measures 45 cm from the SATA connector to the USB plug.

Overview

This adapter cable is a simple bridge between a bare SATA drive and a standard USB port. The 22-pin SATA end connects directly to the drive, while the USB 3.0 end plugs into a laptop, desktop, or other host. With it, an internal SSD or hard disk can be used as external storage without a dedicated enclosure.

The 45 cm cable gives enough slack to place the drive beside the computer, and the adapter includes a 5.5 mm DC female jack for a 12V power supply. That jack matters for 3.5 inch drives, which need more power than a USB port typically provides. The adapter is intended for occasional access, backups, and drive migration rather than permanent installation.

Key Features

  • USB 3.0 interface: supports data transfer speeds up to 5 Gbps.
  • 22-pin SATA connector: fits 2.5 and 3.5 inch SATA drives.
  • 12V DC input: a 5.5 mm female jack allows an external power supply for high-power 3.5 inch drives.
  • Plug and play: no driver installation is described; hot swapping is supported.
  • 45 cm length: practical for desktop use and tight spaces.

Specifications Explained

22 pins is the standard SATA data and power connector layout used on 2.5 and 3.5 inch drives, so the cable mates with the drive's own connector without an adapter. USB 3.0 is the host-side interface, and the quoted 5 Gbps figure is the interface's maximum signalling rate; real-world throughput will be lower and depends on the drive itself. 12V refers to the external supply the adapter can accept through its DC jack, which is the voltage a 3.5 inch drive expects. The 45 cm cable length is a compromise between reach and tidy cable management.

Compatibility and Requirements

The adapter is listed for 2.5 and 3.5 inch 22-pin SATA drives, including SSDs and hard disks. It is stated to work with all versions of Windows and iOS. A USB 3.0 port is needed to reach the quoted transfer rate, though the plug will fit older USB ports. For 3.5 inch drives, a separate 12V power supply with a 5.5 mm plug is required and is not included.

Typical Uses

  • Reading data from a drive removed from an old laptop.
  • Backing up files to a spare SSD or HDD.
  • Cloning a system drive before upgrading storage.
  • Moving large files between computers without a network.
  • Temporarily using a bare drive as portable storage.

What's in the Box

One SATA 3.0 to USB 3.0 hard disk cable, 45 cm, for 2.5 and 3.5 inch 22-pin drives. A power supply is not included.

Quick specs

Manufacturer
Generic
Cable Length
45
Power Supply Voltage (V)
12V
No. of Pins
22
Model No. / Name
Interface Cable
Shipping Weight
0.001 kg
See all specifications