
1 / 4 · Click to enlarge
AI Summary
The SEA YFS403 water flow sensor measures 1-30L/min and outputs a pulse signal proportional to flow, operating from 3.5-24V DC. Its G3/4 ports and compact 35g body make it easy to integrate into water heating or dispensing systems.
Key Highlights
- Wide 3.5-24V DC operating voltage for flexible power
- Measures flow rates from 1 to 30 litres per minute
- G3/4 threaded ports with 12mm input diameter
- Hall effect sensor provides pulse output to controllers
- Stainless steel impeller shaft for durability
- Lightweight 35g design with leak-resistant seal ring
Ideal For
- Makers building water flow monitoring projects
- Appliance repair technicians working on water heaters
- Engineers designing automatic water dispensers
- Hobbyists automating garden irrigation
- Developers creating flow metering devices
Buying Tip
Confirm your system's flow rate and pipe thread match the 1-30L/min range and G3/4 ports before ordering, and ensure your controller can read a pulse signal.
Elecvora expert review
Our verdict
The SEA YFS403 is a straightforward, reliable flow sensor that offers a wide voltage range and a useful flow measurement range for many DIY and commercial projects. Its compact size and standard G3/4 threads make it easy to integrate, though it requires a controller to interpret the pulse output.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 3.5-24V operating voltage
- Durable stainless steel impeller shaft
- Compact and lightweight design
- Standard G3/4 threaded ports
- Simple three-wire connection
Cons
- Requires an external controller to read pulses
- Not suitable for flows below 1L/min
- Must be mounted near-vertically (within 5 degrees)
Best for
Water flow monitoring in heating, dispensing, and metering systems
Not ideal for
Applications requiring flow measurement below 1L/min or in high-shock environments
Specifications
| Model No. / Name | Water Flow Sensor |
|---|---|
| Max Water Flow(L/min) | 1 to 30 |
| Working water pressure(MPa) | ≤1.2 |
| Operating Voltage (VDC) | 3.5-24V |
| Load Capacity (Kg/Wheel) | ≤ 10 mA |
| Input Diameter (mm) | 12 mm |
| Output Diameter (mm) | 26 |
| Operating humidity | 35%-90% RH |
| Width (mm) | 62 |
| Weight (g) | 35 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 7 × 5 × 3 cm |
What's in the box
- 1 x YFS403 3.5-24V Water Flow Sensor Flowmeter G3/4 1-30L/Min
Frequently Asked Questions
What is the output signal of this sensor?
Can I connect this sensor directly to an Arduino?
What is the maximum water pressure this sensor can handle?
What is included in the package?
How should I mount the sensor?
What is the maximum water temperature?
Overview
The SEA YFS403 is a compact inline flow sensor that provides a pulse signal proportional to the rate of water passing through it. It is intended for integration into systems where monitoring or controlling flow is important, such as water heaters, automatic dispensers, and flow metering devices. The sensor operates from a 3.5V to 24V DC supply and can measure flow rates between 1 and 30 litres per minute. Its G3/4 threaded ports and 12mm input diameter allow it to be fitted into standard pipework with minimal modification.
Key Features
- Hall effect sensing: A magnetic rotor turns as water flows, and the Hall sensor outputs a pulse signal that a controller can interpret.
- Durable construction: The impeller shaft is made of stainless steel for wear resistance, and the seal ring is designed to prevent leaks.
- Compact and light: Weighing only 35g and measuring 62mm in width, it adds little bulk to an installation.
- Wide voltage range: Accepts 3.5V to 24V DC, making it compatible with many low-voltage control systems.
- Easy wiring: Three coloured wires simplify connection: red for positive, black for negative, and yellow for signal output.
Specifications Explained
Flow range (1-30L/min): This sensor is suited to applications with moderate flow rates. It will not register flows below 1L/min, and exceeding 30L/min may reduce accuracy or damage the unit.
Operating voltage (3.5-24V DC): The wide range allows the sensor to be used with common microcontrollers and industrial controllers without additional voltage regulation, as long as the supply is within these limits.
Maximum pressure (1.2 MPa): This corresponds to approximately 12 bar, suitable for typical domestic and light commercial water systems.
Port size (G3/4): The G3/4 thread is a common standard for plumbing fittings, making it easy to source adapters. The 12mm input diameter and 26mm output diameter are key dimensions for matching pipework.
Load capacity (≤10 mA): The signal output can drive loads up to 10mA, which is sufficient for most digital inputs.
Operating humidity (35%-90% RH): The sensor is designed for use in typical indoor environments within this humidity range.
Compatibility and Requirements
The YFS403 requires a DC power supply between 3.5V and 24V. It is not a standalone device; it must be connected to a controller or meter that can read pulse signals. The sensor is designed for inline installation and should be mounted vertically with no more than 5 degrees of inclination. The medium temperature must not exceed 120°C. No additional certifications or compatibility with specific controllers are stated.
Typical Uses
This flow sensor is commonly used in water heating systems to detect flow before activating a heater, in automatic water dispensers to measure dispensed volume, and in flow metering equipment for monitoring consumption. It can also be used in credit card machines and water vending machines where precise flow control is needed.
What's in the Box
1 x YFS403 3.5-24V Water Flow Sensor Flowmeter G3/4 1-30L/Min.
Quick specs
- Model No. / Name
- Water Flow Sensor
- Max Water Flow(L/min)
- 1 to 30
- Working water pressure(MPa)
- ≤1.2
- Operating Voltage (VDC)
- 3.5-24V
- Load Capacity (Kg/Wheel)
- ≤ 10 mA
- Input Diameter (mm)
- 12 mm
















