Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SENSIRION, this temperature and humidity sensor ics is a good fit for makers, students and electronics hobbyists. Main specs: item type Humidity & Temp Sensor; model no. / name SHT30 ARP B2 5KS; voltage rating 2.1 - 3.6. Check that your power source supplies 2.1 - 3.6 before connecting it.

Key Highlights

  • Item Type: Humidity & Temp Sensor
  • Model No. / Name: SHT30 ARP B2 5KS
  • Voltage Rating: 2.1 - 3.6

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHumidity & Temp Sensor
Model No. / NameSHT30 ARP B2 5KS
Voltage Rating2.1 - 3.6
InterfaceI²C (2-wire, 400 kHz max)
Operating Temperature (°C)-40 °C to +125 °C
Accuracy±0.2 °C
Current (mA)0.4 µA sleep / 300 µA measuring
Frequency2Hz
Length (mm)03
Width (mm)03
Weight (g)05
Shipping Weight0.01 kg
Shipping Dimensions4 × 4 × 2 cm

Overview

The Sensirion SHT30-ARP-B2.5KS, Temperature and Humidity Sensor, -40°C to 125°C, 0 to 100% RH, Analogue, DFN-8, 2.4 V~5.5 V, made by SENSIRION, is listed in our temperature and humidity sensor ics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Humidity & Temp Sensor (your supply must deliver at least this much current)
  • Model No. / Name: SHT30 ARP B2 5KS
  • Voltage Rating: 2.1 - 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Interface: I²C (2-wire, 400 kHz max) (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -40 °C to +125 °C
  • Accuracy: ±0.2 °C
  • Current (mA): 0.4 µA sleep / 300 µA measuring (your supply must deliver at least this much current)
  • Frequency: 2Hz (make sure the rest of your system works at this frequency)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Sensirion SHT30-ARP-B2.5KS Humidity & Temp Sensor ±3%RH, I2C Output Interface is a high-precision digital humidity and temperature sensor featuring ±2% RH and ±0.2 °C typical accuracy. It supports a wide supply voltage (2.15 V–5.5 V) and fast I2C communication up to 1 MHz. Fully calibrated and compensated, it offers quick startup, low power consumption, and a compact 8-pin DFN package. It’s ideal for demanding applications requiring stable, reliable, and long-term environmental sensing across wide operating conditions.

Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Fully digital output: humidity & temperature
  2. High repeatability with low noise (down to 0.08% RH, 0.04°C)
  3. Response time: 6s (humidity), >2s (temperature)
  4. Long-term drift: <0.25% RH/year, <0.03°C/year
  5. Integrated heater for reliability under condensation
  6. Operates from -40°C to +125°C and 0–100% RH
  7. Two user-selectable I2C addresses
  8. ESD protection: 4kV HBM

Package Includes:

1 x Sensirion SHT30-DIS-B Humidity &amp; Temp Sensor ±3%RH, I2C Output

Quick specs

Item Type
Humidity &amp; Temp Sensor
Model No. / Name
SHT30 ARP B2 5KS
Voltage Rating
2.1 - 3.6
Interface
I²C (2-wire, 400 kHz max)
Operating Temperature (°C)
-40 °C to +125 °C
Accuracy
±0.2 °C
See all specifications