Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact SGP40 gas sensor module with a black shell, cotton core and card holder for indoor air quality monitoring. It outputs over I²C at 3–5 V and includes a 1-meter cable for flexible installation.

Key Highlights

  • SGP40 digital multi-pixel gas sensor for indoor air quality
  • Black plastic shell with built-in cotton core
  • I²C output for easy microcontroller integration
  • 3–5 V supply voltage with 1 Hz sampling rate
  • 1-meter cable for flexible sensor placement
  • Integrated card holder for secure mounting

Ideal For

  • Makers building indoor air quality monitors
  • Developers integrating sensors into air purifiers
  • Smart home enthusiasts adding ventilation control
  • Students learning about I²C gas sensors
  • Product prototypers needing a compact sensor module

Buying Tip

Confirm that your microcontroller supports I²C and can supply 3–5 V, and plan for the 1-meter cable length when positioning the sensor.

Elecvora expert review

Our verdict

A practical SGP40 module for indoor air quality projects, with a protective shell, cotton core and convenient card holder. The I²C interface and wide 3–5 V supply make it easy to integrate with common boards.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple I²C interface
  • Wide 3–5 V supply range
  • Protective black shell with cotton core
  • Integrated card holder for mounting
  • 1-meter cable for flexible placement

Cons

  • Limited to 5–30 °C operating temperature
  • Requires an I²C host and software setup
  • No mounting screws or extra accessories included

Best for

Indoor air quality monitoring and purifier integration

Not ideal for

Outdoor or harsh-environment sensing

Specifications

Item TypeSensor Module
Model No. / NameSGP40
Voltage Rating3 to 5
MaterialPlastic (Shell), Cotton (Core)
Output TypeI²C
Operating Temperature (°C)5 – 30
Typical accuracy (°C)±1.0 at 25
Operating humidity0%RH ~ 90%RH
Sampling Rate1Hz
Cable Length1
Weight (g)24
Shipping Weight0.032 kg
Shipping Dimensions18 × 12 × 3 cm

What's in the box

  • 1 x SGP40 black shell built-in cotton core sensor module
  • 1 x Holder

Frequently Asked Questions

What is the power requirement for this module?
The module accepts a supply voltage of 3 to 5 volts DC. Make sure your board can provide this within its current limits.
How do I connect the sensor to my microcontroller?
Connect the module’s power, ground, SDA and SCL lines to your microcontroller’s I²C bus. The 1-meter cable gives you flexibility in routing.
What is included in the package?
The package includes one SGP40 black shell sensor module with built-in cotton core and one holder.
What is the operating temperature range?
The sensor is specified for 5 to 30 °C, with a typical accuracy of ±1.0 °C at 25 °C. Avoid using it outside this range.
How often does the sensor update?
The sampling rate is 1 Hz, meaning the module provides a new reading once per second.
How should I care for the sensor?
Keep the module within the specified temperature and humidity limits and avoid exposing it to condensing moisture. The cotton core should remain unobstructed for proper airflow.

Overview

The SGP40 is a digital gas sensor module built for indoor air quality monitoring. It pairs a multi-pixel gas sensor with a black plastic shell and a built-in cotton core, and it includes an integrated card holder that simplifies mounting in enclosures or ductwork. The module communicates over I²C and accepts a supply voltage of 3 to 5 volts, so it works with many common microcontrollers and development boards. A 1-meter cable lets you position the sensing element away from heat sources or crowded circuit boards, which can help maintain stable readings.

Key Features

  • Digital gas sensing: The SGP40 sensor provides a digital output for air quality monitoring tasks.
  • Protective black shell: The plastic housing shields the sensor while blending into dark enclosures.
  • Cotton core: A built-in cotton element sits within the shell as part of the module construction.
  • Card holder: An integrated holder allows the module to be secured in place during installation.
  • Flexible cable: The 1-meter cable gives you room to route the sensor where it is needed.
  • Simple interface: I²C output keeps wiring minimal and works with widely used development platforms.

Specifications Explained

Voltage rating (3–5 V): The module can be powered from common 3.3 V and 5 V logic supplies, which covers most hobbyist and prototype boards. I²C output: This two-wire interface is easy to read with standard libraries and requires only data and clock lines in addition to power and ground. Sampling rate (1 Hz): The module updates its reading once per second, which is appropriate for gradual indoor air quality changes rather than fast transient detection. Operating temperature (5–30 °C): The sensor is intended for typical indoor environments within this range; accuracy is specified as ±1.0 °C at 25 °C. Operating humidity (0–90% RH): The module can be used in most indoor spaces, from dry to fairly humid conditions, without condensation. Weight (24 g): The lightweight assembly is easy to mount without adding significant load to small enclosures.

Compatibility and Requirements

The module requires a 3–5 V DC supply and an I²C host. Any microcontroller or development board with an I²C bus and a suitable power rail can read the sensor, provided the operating temperature and humidity limits are respected. The 1-meter cable is fixed to the module and should be routed away from strong electrical noise where possible. No additional libraries or drivers are included; you will need to use your platform’s I²C tools or a compatible software library.

Typical Uses

  • Indoor air quality monitoring in smart home projects
  • Air purifier and ventilation system integration
  • Environmental data logging with microcontrollers
  • Educational and prototyping projects involving gas sensors

What's in the Box

The package includes one SGP40 black shell sensor module with built-in cotton core and one holder.

Quick specs

Item Type
Sensor Module
Model No. / Name
SGP40
Voltage Rating
3 to 5
Material
Plastic (Shell), Cotton (Core)
Output Type
I²C
Operating Temperature (°C)
5 – 30
See all specifications

Explore more