Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A stainless steel bench fixture that grips small circuit boards with three movable bayonet pieces. It mounts to your worktable and adjusts in width and height so phone, PDA and MP3 boards stay steady during soldering and repair.

Key Highlights

  • Stainless steel body for stability during precision soldering work
  • Three movable bayonet pieces reposition to hold different board shapes
  • Adjustable bayonet width and up-down movement for varied PCB sizes
  • Mounts to a worktable with self-tapping screws for a fixed platform
  • Compact 120 x 80 x 19 mm footprint suits crowded workbenches
  • Suits mobile phone, PDA and MP3 circuit board repair tasks

Ideal For

  • Electronics repair technicians working on phone and small device boards
  • Hobbyists who solder and rework compact circuit boards
  • MP3 player and PDA repair specialists needing a steady board
  • Bench technicians who prefer a screw-mounted fixture over a loose holder

Buying Tip

Check that you can screw the base into your bench or a sacrificial board before buying, since the fixture is designed to be table mounted with self-tapping screws.

Elecvora expert review

Our verdict

A straightforward, low-cost stainless steel holder that does one job well: keeping small boards still on the bench. It is a sensible pick for phone, PDA and MP3 repair work where a fixed platform beats chasing a loose board.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Stainless steel frame feels rigid for its size
  • Three movable bayonet pieces allow flexible board positioning
  • Width and height adjustment cover a range of small PCB sizes
  • Screw mounting keeps the fixture fixed during soldering

Cons

  • Requires self-tapping screws and a surface you can drive them into
  • No electronics, magnification or lighting built in
  • Grip depends on manual positioning of the bayonet pieces

Best for

Bench repair of mobile phone, PDA and MP3 circuit boards

Not ideal for

Large boards or work that needs powered holding, lighting or magnification

Specifications

Shipping Weight0.227 kg
Shipping Dimensions13 × 9 × 2 cm

What's in the box

  • 1 x Silver BST-001A PCB Motherboard Adjustable Fixture

Frequently Asked Questions

Does this fixture need power or a battery?
No. It is a purely mechanical stainless steel holder with no electronics, so there is nothing to plug in or charge.
What board sizes can it hold?
The bayonet width is adjustable and the three bayonet pieces are movable, so it is intended for small boards such as mobile phone, PDA and MP3 PCBs. Exact minimum and maximum sizes are not specified.
How is it attached to the bench?
It is table mounted using self-tapping screws. You will need a suitable worktable or mounting surface and the screws to fix it in place.
Can I use it without screwing it down?
The design is intended for screw mounting to provide a stable platform. Using it unmounted would reduce the stability the fixture is meant to provide.
What is included in the package?
The package includes 1 x Silver BST-001A PCB Motherboard Adjustable Fixture. Screws and other accessories are not listed as included.
How should I care for it?
Keep it dry and wipe it clean after use. Because it is stainless steel, it can be cleaned with a damp cloth, but avoid harsh abrasives that could scratch the surface.

Overview

The Silver BST-001A is a bench-mounted fixture for holding small printed circuit boards while you work on them. Its job is simple: keep the board from moving so your soldering iron, tweezers or probe stays on target. The frame is made from stainless steel, and the holding system uses three movable bayonet pieces rather than a single fixed clamp.

Because the bayonet pieces can be repositioned and the bayonet width is adjustable, the fixture can be set up around the edges of different boards instead of forcing one board size. Up-and-down bayonet movement adds a second direction of adjustment. The unit is secured to a worktable with self-tapping screws, which turns it into a stable platform rather than a loose hand-held holder.

Key Features

  • Stainless steel construction for a rigid, long-lasting frame
  • Three movable bayonet pieces that can be placed to suit the board in front of you
  • Adjustable bayonet width to accommodate different PCB sizes
  • Up and down bayonet movement for positioning the grip points
  • Table mounting with self-tapping screws to keep the fixture fixed during work
  • Compact footprint of 120 x 80 x 19 mm and a weight of 210 g

Specifications Explained

Material and finish

The stainless steel body is the part that gives the fixture its stability. It is a passive metal holder, so there are no electronics, no power supply and nothing to charge.

Adjustment system

Two adjustments matter in practice. Bayonet width sets how far apart the grip points sit, and the up-and-down movement of the bayonet changes their position vertically. The three movable pieces mean you are not locked to one clamping layout.

Size and weight

At 120 x 80 x 19 mm and 210 g, the fixture is small enough for a crowded bench and light enough to reposition when needed. Shipping weight is listed at 0.227 kg and shipping dimensions at 13 x 9 x 2 cm.

Compatibility and Requirements

The fixture is intended for mobile phone, PDA and MP3 PCB repair. It is a mechanical holder, so it does not connect to the board electrically and has no voltage or power requirement. Mounting requires self-tapping screws and a worktable surface you are willing to drive them into.

Typical Uses

  • Holding a phone board steady while soldering or desoldering components
  • Supporting small PDA and MP3 player boards during inspection and rework
  • Keeping a board fixed while probing test points or cleaning joints
  • Creating a repeatable work position for small-board repair jobs

What's in the Box

1 x Silver BST-001A PCB Motherboard Adjustable Fixture.

Quick specs

Shipping Weight
0.227 kg
Shipping Dimensions
13 × 9 × 2 cm
See all specifications