Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This gsm gprs and gnss modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Sim800 Type; antenna type finger antenna; shipping weight 0.07 kg.

Key Highlights

  • Item Type: Sim800 Type
  • Antenna Type: finger antenna
  • Shipping Weight: 0.07 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSim800 Type
Antenna Typefinger antenna
Shipping Weight0.07 kg
Shipping Dimensions12 × 8 × 4 cm

Overview

The Sim800C GPRS/GSM Shield with Antenna is listed in our gsm gprs and gnss modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sim800 Type
  • Antenna Type: finger antenna
  • Shipping Weight: 0.07 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 12 × 8 × 4 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Sim800C GPRS/GSM Shield with Antenna provides you with a way to use the GSM phone network to receive data from a remote location,and it is compatible with all boards which have the same form factor (and pinout) as a standard Arduino Board. This shield can also be applied to DIY phones for calling, receiving and sending messages, making GPS trackers or other applications like Smart home, etc.

SIM800C GPRS/GSM Shield delivers GSM/GPRS850/900/1800/1900MHz signals for Audio, SMS and GPRS Service. Also, it runs at the low power consumption of about 0.6mA in sleep mode but acts compliant to GSM phase 2/2+: Class 4 (2 W @850/ 900 MHz), Class 1 (1 W @ 1800/1900MHz) with a two-in-one headset jack.

What’s more, to make your project more flexible and efficient, we have prepared two different antennas for you. One is the traditional GPRS antenna which is more sensitive while another one is an onboard antenna which is more compact and easy to install.


Features:

  1. Quad-Band 850/ 900/ 1800/ 1900 MHz
  2. GPRS multi-slot class 10/12
  3. GPRS mobile station class B
  4. Compliant to GSM phase 2/2+
  5. Onboard Provision for Mic and Speaker.

Specifications:

  1. Chip used: QUAD BAND SIM800C GSM CHIP.
  2. Arduino compatibility: Arduino UNO R3, Arduino Mega etc.
  3. Antenna type: finger antenna.
  4. Output: TTL and RS232 serial output.
  5. Simcard holder: standard size.
  6. Buzzer for CALL and SMS indication.
  7. Indication LEDs PWR - Power Indication STS - Status Indication NTW - Network Indication
  8. PINOUTS: o2 - RX o3 – TX
  9. Provision for the headphone jack, mic, and speaker.

Package Includes:

1 x Sim800C GPRS/GSM Shield with Antenna.

Quick specs

Item Type
Sim800 Type
Antenna Type
finger antenna
Shipping Weight
0.07 kg
Shipping Dimensions
12 × 8 × 4 cm
See all specifications