Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This gsm gprs and gnss modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Module; module type GPRS Module, GSM Module; voltage rating (v) 5V. Check that your power source supplies 5V before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: Module
  • Module Type: GPRS Module, GSM Module
  • Voltage Rating (V): 5V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeModule
Module TypeGPRS Module, GSM Module
Voltage Rating (V)5V
Baud Rate (bps)Adaptive (default), Support  2400-115200
Power Interface2.54mm Pin Header/MICRO USB
Antenna InterfaceASMA, IPX
PCB Dimension (lxbxh)mm40.1x27.1x11.1
Mounting Hole Diameter (mm)Hole diameter=3.8mm X-axis pitch=33.5mm Y-axis pitch=21.5mm
Shipping Weight0.105 kg
Shipping Dimensions9 × 6 × 3 cm

Overview

The SIM800L V2 5V Wireless GSM GPRS MODULE Quad-Band with Antenna is listed in our gsm gprs and gnss modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Module
  • Module Type: GPRS Module, GSM Module
  • Voltage Rating (V): 5V (match this to your power supply; too high a voltage can damage the part)
  • Baud Rate (bps): Adaptive (default), Support  2400-115200 (confirm your cable or board uses the same connector)
  • Power Interface: 2.54mm Pin Header/MICRO USB (confirm your cable or board uses the same connector)
  • Antenna Interface: ASMA, IPX (the IP code tells you how much dust and water the casing keeps out)
  • PCB Dimension (lxbxh)mm: 40.1x27.1x11.1 (measure your mounting space before ordering)
  • Mounting Hole Diameter (mm): Hole diameter=3.8mm X-axis pitch=33.5mm Y-axis pitch=21.5mm

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

SIM800L V2 5V Wireless GSM GPRS MODULE Quad-Band with Antenna power supply for 5 v, computer debug USB to TTL serial port. Power to the output current of 800 ma, TTL serial interface is compatible with 3.3 V and 5 V micro-controller, can be directly after purchase and single-chip computer connection.

The IPX antenna, the antenna interface can be arbitrary switching PCB glue stick antenna and suction cups. SIM800L 4 frequency communications, data available in the world. Do foreign trade and foreign trade projects preferred.

SIM800L V2.0 GSM/GPRS Module is a QUAD-BAND GSM/GPRS module which compatible with Arduino. The module works to add both of GSM features (voice call or SMS) and GPRS features. The advantages of these modules are the VCC and TTL serial levels that have 5V voltage, so you can directly connect it to Arduino or another minimum system with 5V of the voltage level.

There are so many GPRS/GSM modules on the market which need to add 5V regulator and level converter circuit, while SIM800L V.2 GSM/GPRS module already has a built-in regulator circuit and TTL level converter on the board.

Pin Description

5v: Power interface Power the module CONNECT TO DC 5v GND: Connect to GND. VDD: TTL UART interface The TTL UART serial interface, you can connect the MCU like 51MCU or ARM or MSP430 directly. The pin of VDD is used to match the voltage of the TTL. SIM_TXD: SIM module Transmitter. SIM_RXD: SIM module Receiver. GND: If this pin is unused, keep open. RST: RST the module, if this pin is unused, keep open. 


Features :

  1. Network support: Quad-Band 850/900/1800/1900 MHz - works on GSM networks in all countries across the world.
  2. TTL serial interface compatible with 3.3V and 5V MCU
  3. The small size is suitable for all kinds of sleeve belt type and embedded.
  4. playing card slot, convenient change mobile phone card.Can side reserve replacement cell phone bayonet into the box.
  5. using the IPX interface can arbitrarily change the antenna. The default PCB antenna greatly reduces: use the space.
  6. the board with gold plated board, more stable performance.
  7. when wiring neat guarantee board running more stable.
  8. this module adds a protection device, which can realize the prevention, high pressure, reduce the loss of the board, suitable for the project and learn.

Useful Links:
Tutorials: Send Receive SMS & Call with SIM800L GSM Module & Arduino

Package Includes :

1 x SIM800L V2 5V Wireless GSM GPRS MODULE.

1 x L-Shape Antena

Quick specs

Item Type
Module
Module Type
GPRS Module, GSM Module
Voltage Rating (V)
5V
Baud Rate (bps)
Adaptive (default), Support  2400-115200
Power Interface
2.54mm Pin Header/MICRO USB
Antenna Interface
ASMA, IPX
See all specifications