
1 / 6 · Click to enlarge
At a glance
This gsm gprs and gnss modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Module; module type GPRS Module, GSM Module, GPS Module; voltage rating 5. Check that your power source supplies 5 before connecting it.
Key Highlights
- Wireless connection
- Item Type: Module
- Module Type: GPRS Module, GSM Module, GPS Module
- Voltage Rating: 5
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Module |
|---|---|
| Module Type | GPRS Module, GSM Module, GPS Module |
| Voltage Rating | 5 |
| Input current | 2A |
| Additional Specs. | Accuracy (meter): Approx 2.5 |
| Dimensions (L x W x H) mm | 80 x 50 x 14 |
| Weight (g) | 30 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 10 × 6 × 2 cm |
Overview
The SIM808 Bluetooth Compatible GSM/GPRS/GPS Module is listed in our gsm gprs and gnss modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Module
- Module Type: GPRS Module, GSM Module, GPS Module
- Voltage Rating: 5 (match this to your power supply; too high a voltage can damage the part)
- Input current: 2A (your supply must deliver at least this much current)
- Additional Specs.: Accuracy (meter): Approx 2.5
- Dimensions (L x W x H) mm: 80 x 50 x 14 (measure your mounting space before ordering)
- Weight (g): 30 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features :
- Supports Quad-band 850/900/1800/1900MHz, compatible with all 2G networks all around the world.
- Inner MT3337 GPS receiver, -165dBm precision, control on a same serial port.
- Earphone/ microphone outputs on a card or external 32-ohm speaker + supports voice calls with an electret microphone.
- Sending and receiving SMS.
- Sending and receiving GPRS data (TCP/IP, HTTP vb).
- UART communication with automatic baud rate settings.
- GPRS multi-slot class 12/10
- GPRS mobile station class B
- Comply with GSM phase 2/2 +
- Class 4 (2 W @ 850 / 900MHz)
- Class 1 (1 W @ 1800 / 1900MHz)
- Support low power consumption mode: 100mA @ 7V-GSM mode
- Support AT command control (3GPP TS 27.007,27.005 and SIMCOM enhanced AT Commands)
- Supports GPS satellite navigation technology
- Support LED status indicator: Power supply status, network status, and operating modes
- Working environment: -40 ℃ ~ 85 ℃
- 22 tracking/66 acquisition channel
- GPS L1 C/A code
- Precision: Tracking: -165dBm,
- Cold start: -148dBm
- Finding Location Time(typical): Cold start: 32sn, Hot start: 1sn, Warm start: 5sn
- Accuracy: ~2.5m
Click Here.
SIM808 library Click here. Hardware configurations :- 1 Connect the USB-TTL to the UART interface USB-TTL SIM808 TXD RXD RXD TXD GND GND
- Insert the valid SIM card to the SIMCARD holder.
- Connect the GPS antenna and GSM antenna to the board.
- Connect the power adapter to the DC044 Interface.
- Change the switch.
- Press the POWKEY button for 2 seconds, the SIM808 module will work and the other 3 LEDs will light.
Package Includes :
1 x SIM808 Bluetooth Compatible GSM/GPRS/GPS Module. 1 x GPS antenna with SMA male connector. 1x IPX GSM antenna with SMA male connector.Quick specs
- Item Type
- Module
- Module Type
- GPRS Module, GSM Module, GPS Module
- Voltage Rating
- 5
- Input current
- 2A
- Additional Specs.
- Accuracy (meter): Approx 2.5
- Dimensions (L x W x H) mm
- 80 x 50 x 14
















