
1 / 4 · Click to enlarge
AI Summary
The SimonK 30A BLDC ESC with connectors delivers 30A continuous and 40A burst current for multirotors and RC planes, plus a 5V/2A BEC. It supports 2-3S LiPo and includes backward-polarity protection for safer setups.
Key Highlights
- 30A continuous, 40A burst current for BLDC motors
- Built-in 5V/2A BEC powers receiver without extra battery
- Compatible with 2S to 3S LiPo batteries
- Backward-polarity and 5V line protection
- High-quality MOSFETs and heat sink for thermal management
- Fully programmable with standard RC remote control
Ideal For
- Drone builders assembling multirotors
- RC plane hobbyists needing a reliable ESC
- FPV pilots looking for a compact 30A ESC
- Makers and students working on BLDC motor projects
Buying Tip
Check that your motor's current draw at full throttle stays below 30A and your battery is 2S or 3S to avoid overloading the ESC.
Elecvora expert review
Our verdict
The SimonK 30A ESC offers a solid feature set for its class, including a 5V/2A BEC and protection circuits that add peace of mind. It is a dependable choice for budget-conscious builders who need a compact, programmable ESC with connectors already attached.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated 5V/2A BEC simplifies wiring
- Backward-polarity and 5V line protection
- Pre-soldered connectors save time
- Programmable with standard RC gear
- Heat sink for effective thermal management
Cons
- Limited to 2S-3S LiPo batteries
- No specific firmware or programming card mentioned
- May require soldering for some connections
Best for
Multirotor and RC plane builders using 2S-3S LiPo and motors up to 30A
Not ideal for
High-voltage or high-current setups beyond 3S and 30A continuous
Specifications
| Item Type | Brushless ESC |
|---|---|
| Model No. / Name | SIMONK 30A |
| Burst Current (A) | 40 |
| Constant Current (A) | 30 |
| BEC (Y/N) | Yes, (5V/2A) |
| Compatible LiPO Batteries | 2S to 3S |
| Color | Red |
| Application | BLDC Motors, Multirotors, Rc Planes etc. |
| Length (mm) | 54 |
| Width (mm) | 24 |
| Weight (g) | 23 |
| Shipping Weight | 0.027 kg |
| Shipping Dimensions | 10 × 10 × 5 cm |
What's in the box
- 1 x SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
Frequently Asked Questions
What batteries can I use with this ESC?
Does this ESC have a built-in BEC?
What is the maximum current this ESC can handle?
Are connectors included?
Can I program this ESC?
What motors is this ESC recommended for?
Overview
The SimonK 30A BLDC ESC is a brushless electronic speed controller built for multirotors, RC planes, and other BLDC motor projects. It provides smooth and responsive motor control, thanks to a high-performance microcontroller and high-quality MOSFETs. This version comes with connectors pre-soldered, making installation quicker and easier. Whether you are building a drone or upgrading an RC model, this ESC offers a practical balance of performance and reliability.
Key Features
- High-quality MOSFETs for efficient BLDC motor drive.
- Backward-polarity protection and protection on the 5V receiver line to help prevent damage from accidental reverse connections.
- High-performance microcontroller for broad motor compatibility and greater efficiency.
- Fully programmable with any standard RC remote control.
- Heat sink with a high-performance heat transmission membrane for better thermal management.
- Three start modes: Normal, Soft, and Super-Soft, suitable for fixed-wing aircraft and helicopters.
- Configurable throttle range to match your remote control.
Specifications Explained
Current rating: The ESC can handle 30A continuously and up to 40A in short bursts, making it suitable for many popular brushless motors. BEC: The built-in 5V/2A battery eliminator circuit powers your receiver and servos, so you do not need a separate receiver battery. Battery compatibility: It works with 2S to 3S LiPo batteries, covering common voltage ranges for small to medium multirotors and planes. Dimensions and weight: At 54mm long, 24mm wide, and 23g, it fits easily into most builds without adding significant weight.
Compatibility and Requirements
This ESC is compatible with 2S to 3S LiPo batteries and brushless motors that draw up to 30A continuous. It is recommended for use with A2212 brushless motors (1000KV, 1400KV, 2200KV). The included connectors allow for straightforward wiring, but you will need a suitable power distribution board or wiring harness for multirotor setups. A standard RC remote control is required for programming and operation.
Typical Uses
Use this ESC in quadcopters and other multirotors, RC planes, and helicopters. It is also suitable for any project requiring a compact, programmable brushless speed controller with a built-in BEC.
What's in the Box
1 x SimonK 30A BLDC ESC Electronic Speed Controller with Connectors.


Quick specs
- Item Type
- Brushless ESC
- Model No. / Name
- SIMONK 30A
- Burst Current (A)
- 40
- Constant Current (A)
- 30
- BEC (Y/N)
- Yes, (5V/2A)
- Compatible LiPO Batteries
- 2S to 3S














