Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SimpliFly S500 is a 500 mm carbon fiber and nylon quadcopter frame kit with an integrated power distribution board and included landing gear. Its modular layout and reinforced arms make DIY assembly and repairs simpler for builders.

Key Highlights

  • 500 mm wheelbase X-configuration frame for DIY quadcopter builds
  • Carbon fiber and polyamide nylon construction with reinforced 220 x 40 mm arms
  • Integrated PCB power distribution board for direct ESC connections
  • Includes 200 mm landing gear for protection during takeoff and landing
  • Modular, easy-assemble design that simplifies builds and disassembly
  • 453 g frame weight with 3 mm mounting holes and wide electronics space

Ideal For

  • First-time builders assembling a 500-class DIY quadcopter
  • FPV enthusiasts who want room for a camera and video gear
  • Hobbyists building a stable camera-carrying platform
  • Makers who prefer modular frames that are easy to repair
  • Pilots looking for a durable frame for regular flying practice

Buying Tip

Confirm your motors and electronics match the 3 mm mounting holes, and budget for motors, ESCs, a flight controller and a battery since this is a frame kit only.

Elecvora expert review

Our verdict

The SimpliFly S500 is a sensible, well-organised frame kit for anyone building a 500-class quad without wanting to design a frame from scratch. The integrated PDB and modular layout reduce build friction, while the nylon arms offer a practical compromise between stiffness and crash tolerance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated power distribution board simplifies ESC wiring
  • Modular assembly makes repairs and part replacement easier
  • Reinforced nylon arms with support ridges for rigidity
  • Landing gear included for ground clearance and protection
  • Reasonable 453 g frame weight for a 500 mm platform

Cons

  • Frame kit only, so motors, ESCs, flight controller and battery are extra costs
  • Assembly and soldering are required, which may not suit plug-and-play buyers
  • Mounting holes are 3 mm, so hardware must match

Best for

DIY builders assembling a 500-class quadcopter

Not ideal for

Buyers wanting a ready-to-fly drone

Specifications

Item TypeCarbon Fiber Quadcopter Drone Frame Kit
Model No. / NameS500
Frame MaterialCarbon Fiber + Polyamide Nylon
Wheelbase500 mm
Mounting Hole Diameter (mm)3 mm
Landing Gear MaterialCarbon Fiber + Polyamide Nylon
Landing Gear Height (mm)200mm
Arm Size (L x W)220 x 40 mm
Frame Weight453g
Shipping Weight0.609 kg
Shipping Dimensions28 × 19 × 7 cm

What's in the box

  • 1 x SimpliFly S500 Carbon Fiber Quadcopter Drone Frame Kit

Frequently Asked Questions

Is the SimpliFly S500 a complete drone?
No. It is a frame kit only. Motors, ESCs, propellers, flight controller, radio gear, battery and camera must be purchased separately.
What does the integrated PDB do?
The built-in power distribution board lets ESCs connect directly inside the frame, which reduces loose wiring and keeps the build tidier.
What motors and electronics fit this frame?
The mounting holes are 3 mm, so choose motors and components whose mounting hardware matches that diameter. The 500 mm wheelbase gives space for a standard flight controller stack, ESCs and a battery.
Does the kit include landing gear?
Yes. A 200 mm landing gear set made from carbon fiber and polyamide nylon is included with the frame.
How much does the frame weigh?
The bare frame weighs 453 g. Your finished quad will be heavier once motors, electronics, camera gear and a battery are added.
How should I care for the frame?
Check arm screws and fasteners after hard landings, replace any cracked nylon arms before flying again, and keep the carbon fiber plates clean and dry.

Overview

The SimpliFly S500 is a quadcopter frame kit aimed at builders who want a solid, no-fuss platform to assemble themselves. Its 500 mm wheelbase places it in a useful middle ground: large enough to carry a camera, flight controller and battery comfortably, yet compact enough to remain manageable in the air. The frame combines carbon fiber with polyamide nylon, pairing stiffness where it matters with nylon arms that are designed to absorb the knocks of hard landings.

Because it ships as a modular kit, the S500 is assembled with fasteners rather than permanent bonds, so individual parts can be replaced after a crash. An integrated PCB power distribution board is part of the frame structure, letting ESCs connect directly and reducing the amount of loose wiring inside the build.

Key Features

  • 500 mm wheelbase: a stable X-configuration platform for four-rotor builds.
  • Carbon fiber and polyamide nylon: a composite structure balancing rigidity with impact resistance.
  • Reinforced arms: 220 x 40 mm nylon arms with support ridges for added rigidity.
  • Integrated PDB: a built-in power distribution board for clean, direct ESC wiring.
  • Landing gear included: 200 mm gear protects the underside during takeoff and landing.
  • Builder-friendly layout: modular assembly makes the frame quick to put together and take apart.

Specifications Explained

Wheelbase (500 mm) is measured diagonally between motor centres. It sets the overall size of the craft and how much space you have for electronics, camera equipment and battery placement.

Frame weight (453 g) is the bare frame with landing gear. Everything else, including motors, ESCs, flight controller, camera and battery, adds to the all-up weight, so plan your component choices around that figure.

Arm size (220 x 40 mm) describes the length and width of each arm. The nylon construction is intended to resist breakage, and the support ridges stiffen the arm under load.

Mounting holes (3 mm) are the fixing points for components. Check that your motors and electronics match this diameter before ordering hardware.

Landing gear (200 mm) raises the frame clear of the ground, giving propellers and underslung equipment room to operate safely.

Compatibility and Requirements

The S500 is a DIY frame kit, so motors, ESCs, propellers, a flight controller, radio gear, a battery and a camera or FPV system are all supplied separately. The integrated power distribution board is designed for direct ESC connections. Mounting holes are 3 mm, so confirm your hardware and motor mounts match. No electronics, motors or battery are included in the kit.

Typical Uses

The S500 suits hobbyists assembling a first 500-class quad, makers building a camera-carrying platform, and FPV enthusiasts who want a frame with room for a camera and video gear. Its modular construction also makes it a sensible choice for pilots who expect to repair and rebuild over time.

What's in the Box

  • 1 x SimpliFly S500 Carbon Fiber Quadcopter Drone Frame Kit

Quick specs

Item Type
Carbon Fiber Quadcopter Drone Frame Kit
Model No. / Name
S500
Frame Material
Carbon Fiber + Polyamide Nylon
Wheelbase
500 mm
Mounting Hole Diameter (mm)
3 mm
Landing Gear Material
Carbon Fiber + Polyamide Nylon
See all specifications