
1 / 4 · Click to enlarge
At a glance
Made by SimpliFly, this simplifly telemetry is a good fit for everyday home and hobby use. Main specs: item type Telemetry Radio; communication 2-way full-duplex; firmware Open-source SIK firmware.
Key Highlights
- Item Type: Telemetry Radio
- Communication: 2-way full-duplex
- Firmware: Open-source SIK firmware
Ideal For
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Telemetry Radio |
|---|---|
| Frequency (GHz) | 100 mW 433 MHz |
| Communication | 2-way full-duplex |
| Firmware | Open-source SIK firmware |
| Protocol | MAVLink |
| Connector Type | RP-SMA |
| Interface | Adaptive TDM UART |
| Shipping Weight | 0.169 kg |
| Shipping Dimensions | 14 × 12 × 5 cm |
Overview
The Simplifly SiK Telemetry Radio – 100 mW 433 MHz, made by SimpliFly, is listed in our simplifly telemetry range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Telemetry Radio
- Frequency (GHz): 100 mW 433 MHz (make sure the rest of your system works at this frequency)
- Communication: 2-way full-duplex
- Firmware: Open-source SIK firmware
- Protocol: MAVLink
- Connector Type: RP-SMA (confirm your cable or board uses the same connector)
- Interface: Adaptive TDM UART (confirm your cable or board uses the same connector)
- Shipping Weight: 0.169 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This Simplifly SiK Telemetry Radio is a small, light and inexpensive open-source radio platform that typically allows ranges of better than 700m “out of the box” (the range can be extended to several kilometers with the use of a patch antenna on the ground). This radio is plug-n-play all Pixhawk Standard and other Flight Controller, providing the easiest ways to setup a telemetry connection between your Autopilot and a ground station.
It uses open-source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Ardupilot, Q-Ground Control, PX4 Autopilot.
- 100mW maximum output power (adjustable) -117 dBm receive sensitivity.
- RP-SMA connector.
- 2-way full-duplex communication through adaptive TDM UART interface.
- MAVLink protocol framing.
- Frequency Hopping Spread Spectrum (FHSS) Configurable duty cycle.
- Error correction corrects up to 25% of bit errors. Open-source SIK firmware.
- Configurable through Mission Planner & APM Planner.
Features:
- Open-source SiK firmware.
- The easiest way to connect your Autopilot and Ground Station.
- Interchangeable air and ground radio.
- Type-C port for lightning-fast connectivity.
- Plug-n-play for Pixhawk Standard Flight Controllers.
- 6-position JST-GH connector.
Package Includes:
2 x Radio modules with antennas
1 x USB type-C to USB-A cable
1 x USB type-C to USB type-C cable
1 x Android OTG adapter cable
1 x JST-GH-6P to JST-GH-6P cable
1 x JST-GH-6P to Molex DF13 6P cable
Quick specs
- Item Type
- Telemetry Radio
- Frequency (GHz)
- 100 mW 433 MHz
- Communication
- 2-way full-duplex
- Firmware
- Open-source SIK firmware
- Protocol
- MAVLink
- Connector Type
- RP-SMA
















