
1 / 2 · Click to enlarge
At a glance
This cell terminal insulation is a good fit for everyday home and hobby use. Main specs: hole configuration 1P; compatibility 18650/18350 Lithium Battery Cell; hole type PS.
Key Highlights
- Hole Configuration: 1P
- Compatibility: 18650/18350 Lithium Battery Cell
- Hole Type: PS
Ideal For
- Everyday use
Buying Tip
Match the battery chemistry, voltage and connector to your device, and charge it only with a charger made for that chemistry.
Specifications
| Hole Configuration | 1P |
|---|---|
| Compatibility | 18650/18350 Lithium Battery Cell |
| No. of Holes | 20 holes, 30 holes |
| Hole Type | PS |
| No. of Sheets | 1 |
| Thickness (mm) | 0.25 |
| Outer Diameter (mm) | 17 |
| Inner Ring Diameter (mm) | 9 |
| Color | Dark Green |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 23 × 22 × 3 cm |
Overview
The Single Hole Electrical Insulating Adhesive Mat for 18650/18350 PS 1P Battery Cell Terminal Insulation - 20Holes/pc - 5 X 4 Sheet is listed in our cell terminal insulation range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Hole Configuration: 1P
- Compatibility: 18650/18350 Lithium Battery Cell (note the battery type so you can order spares or the right charger)
- No. of Holes: 20 holes, 30 holes
- Hole Type: PS
- No. of Sheets: 1
- Thickness (mm): 0.25
- Outer Diameter (mm): 17
- Inner Ring Diameter (mm): 9
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This Single Hole Electrical Insulating Adhesive Mat for Battery Cell terminal Insulation is a cardboard paper for 18650/18350 battery insulator. Better protection to avoid short circuit on batteries.Easy peel and stick application.
The Outer Ring Diameter is 17mm whereas Inner Ring Diameter is 10mm Thickness: 0.25mm Battery Insulators Adhesive Paper Rings.
- Take off each insulation paper from base paper.
- Put and stick upper hollow adhesive insulation paper on the top of battery positive.
- Put and stick lower solid adhesive insulation paper on the negative.
- Then, you can weld Ni tape or Ni-plated steel plate with positive, negative to make the battery pack.
Note: Colors in the image may vary from the Actual Product.
Use Case:
Keeps the positive terminal electrically insulated from the can body and other conductive components, preventing accidental shorts.
Features:
- Better protection to avoid short circuit on batteries.
- Perfect Build for DIY battery packs!
Application:
1. DIY Electronics 2. Flashlight & Portable lighting 3. Medical Devices 4. E-bikes, Power Banks
Package Includes:
1 x Single Hole Electrical Insulating Adhesive Mat for 18650/18350 PS 1P Battery Cell Terminal Insulation - 20Holes/pc - 5 X 4 Sheet
Quick specs
- Hole Configuration
- 1P
- Compatibility
- 18650/18350 Lithium Battery Cell
- No. of Holes
- 20 holes, 30 holes
- Hole Type
- PS
- No. of Sheets
- 1
- Thickness (mm)
- 0.25













