Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-channel AC/DC balance charger that puts up to 100W into each of two packs simultaneously, with 0.2-10A current control and a 2.8-inch colour-style TN display. It covers LiPo, LiFe, LiIon, LiHV, NiMH, NiCd and Pb packs from either mains or a DC field source.

Key Highlights

  • Two independent channels, each up to 100W on AC power
  • 0.2-10A charge current range per channel for small to large packs
  • 1A balance current helps keep multi-cell lithium packs aligned
  • Runs on 100-240VAC mains or 10-30VDC for field charging
  • 2.8-inch TN display with 240x320 resolution for clear readouts
  • Works with SKYRC Charge Master software for monitoring and control

Ideal For

  • RC car and truck owners charging multiple drive packs per session
  • FPV and drone pilots cycling several flight batteries at once
  • Aircraft and boat hobbyists working with mixed battery chemistries
  • Bench hobbyists who want AC and DC input in one compact charger
  • Hobbyists moving between LiPo, LiHV, NiMH and Pb packs

Buying Tip

Check your pack's maximum charge rate before dialling in current, and remember the AC input is capped at 100W total, so two channels share that budget.

Elecvora expert review

Our verdict

The D100neo is a sensible step up for hobbyists who are tired of charging one pack at a time, pairing two solid channels with AC and DC input in a small footprint. Its discharge capability is modest, so treat it as a charger first and a storage-discharge tool second.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two independent channels in one compact body
  • AC and DC input for bench and field use
  • Broad chemistry support including LiHV and Pb
  • Clear 2.8-inch display and Charge Master software support
  • 1000mA balance current for multi-cell lithium packs

Cons

  • AC input is limited to 100W total across both channels
  • Discharge power is low at 5W main port and 25W balance port
  • Requires a separate DC supply for full 200W DC operation

Best for

Hobbyists charging two packs at once from mains or a DC source

Not ideal for

Users who need high-power discharge cycling or a single very high-wattage channel

Specifications

Charge Current Range (A)0.2 to 10
Power Rating(AC) 100 Max, (DC) 200 Max
Dischage Current Range (A)0.1 to 2.0
Dimensions (L x W x H) mm116 x 110 x 79mm
Discharge Power (W)Main port: 5W Balance port: 25W MAX (LiPo/6S)
Supported SoftwareSKYRC charge master
Body Case MaterialPC-ABS V0
Charging Power (W)AC: 100W DC: 200W
Input Voltage (VAC)100-240
Input Voltage (VDC)10-30V
Balance Current(mA)1000mA
Input current(DC) 18A
Display TypeTN
Display Size (Inch)2.8
Resolution240x320 Pixel
Input TypeAC/DC Both
Weight (g)434g
Shipping Weight0.603 kg
Shipping Dimensions13 × 11 × 11 cm

Frequently Asked Questions

Can the D100neo charge two different battery types at the same time?
Yes. The two channels are independent, so you can run different chemistry settings and currents on each output, provided each setting is correct for its pack.
What input power does it need?
It accepts 100-240VAC mains or 10-30VDC. On AC the unit is rated to 100W maximum, and on DC it is rated to 200W maximum with up to 18A input current.
Which battery chemistries are supported?
LiPo, LiFe, LiIon, LiHV, NiMH, NiCd and Pb packs are supported, with balancing for lithium packs through the balance port.
What is the maximum charge current per channel?
The charge current range is 0.2A to 10A, so you can set anything within that range that your battery is rated to accept.
Can I monitor charging from a computer?
Yes. The charger supports SKYRC Charge Master software for monitoring and control from a connected computer.
How should I look after the charger?
Keep it on a firm, ventilated surface during use, avoid covering the case, and store it dry. Always match the selected chemistry and cell count to the connected pack before starting.

Overview

The SkyRC D100neo is a dual-channel balance charger for RC hobbyists who regularly work with more than one battery pack. Instead of charging packs one after another, it gives you two independent outputs, each rated up to 100W on AC input, so a day at the bench or the field can be spent flying, driving or sailing rather than waiting.

It is a compact unit at 116 x 110 x 79mm and 434g, and it accepts both mains AC and DC input. That means the same charger can sit on your workbench at home and then run from a suitable DC supply when you are away from a wall socket.

Key Features

  • Dual channel output: charge or discharge two packs at the same time, each with its own settings.
  • Wide chemistry support: LiPo, LiFe, LiIon, LiHV, NiMH, NiCd and Pb.
  • Adjustable current: 0.2A to 10A charge range and 0.1A to 2.0A discharge range.
  • Balancing built in: 1000mA balance current for multi-cell lithium packs.
  • Clear display: 2.8-inch TN screen at 240x320 pixels shows channel status at a glance.
  • Software support: SKYRC Charge Master for monitoring and control from a computer.
  • Durable housing: PC-ABS V0 case material.

Specifications Explained

Power ratings: On AC input the charger is rated to 100W maximum, and on DC input it is rated to 200W maximum. In practice, the AC figure is the ceiling for the whole unit, so two channels share that budget; on a DC supply there is more headroom for charging larger packs quickly.

Charge and discharge current: The 0.2-10A charge range lets you set a low current for small receiver packs and a higher current for larger flight or drive packs, within the limits of your battery's own rating. Discharge is 0.1-2.0A, useful for bringing packs down to a storage level.

Discharge power: The main port is rated at 5W and the balance port at 25W maximum for LiPo up to 6S. This tells you the charger is built primarily for charging, with discharging as a slower supporting function.

Input: 100-240VAC covers typical mains voltages in the US, UK, EU, Australia, Brazil, Japan and India. DC input of 10-30V with up to 18A input current suits a suitable external DC power source.

Compatibility and Requirements

The D100neo supports LiPo, LiFe, LiIon, LiHV, NiMH, NiCd and Pb battery types, with balancing available for lithium packs through the balance port. It requires either a mains supply of 100-240VAC or a DC source between 10V and 30V. For software monitoring, SKYRC Charge Master is the supported application. Always confirm your pack's chemistry, cell count and charge rate before starting a cycle.

Typical Uses

This charger suits RC car and truck owners charging drive packs, drone and FPV pilots topping up flight batteries, aircraft and boat hobbyists, and anyone who wants a second channel available while the first is busy. Its dual output also helps when you want to charge a transmitter pack and a vehicle pack in the same session.

Quick specs

Charge Current Range (A)
0.2 to 10
Power Rating
(AC) 100 Max, (DC) 200 Max
Dischage Current Range (A)
0.1 to 2.0
Dimensions (L x W x H) mm
116 x 110 x 79mm
Discharge Power (W)
Main port: 5W Balance port: 25W MAX (LiPo/6S)
Supported Software
SKYRC charge master
See all specifications