Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-channel AC/DC charger, discharger and power supply with two independent 130W outputs at up to 14A each. It covers LiPo, LiHV, LiFe, LiIon, NiMH, NiCd and Pb packs, so one unit serves most of your charging jobs.

Key Highlights

  • Two independent 130W channels, each up to 14A charge current
  • Mains 110-240VAC or DC 11-18V input for bench and field use
  • Supports LiPo, LiHV, LiFe, LiIon, NiMH, NiCd and Pb chemistries
  • 500mA balance current and 500mA drain current for pack care
  • Backlit LCD with five-button control and Charger Master PC software
  • Doubles as a DC power supply for two hobby devices at once

Ideal For

  • RC car and truck racers charging two packs between heats
  • FPV pilots preparing several lithium packs before a session
  • Airplane and helicopter hobbyists running mixed battery chemistries
  • Field users who power chargers from 11-18V battery packs
  • Hobbyists who want one bench unit for charging, discharging and power supply duty

Buying Tip

Confirm the charge leads and balance boards included match your pack connectors, since the D260's dual channels are only as useful as the leads you can plug into them.

Elecvora expert review

Our verdict

The D260 Duo is a sensible step up for hobbyists who have outgrown a single-channel charger but still want a compact, travel-friendly unit. Two 130W channels, broad chemistry support and AC/DC input cover most everyday charging jobs without extra boxes.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Two independent 130W channels at up to 14A each
  • Handles seven battery chemistries including LiHV
  • Runs from 110-240VAC or 11-18VDC
  • Doubles as a DC power supply
  • Charger Master software for graphs and firmware updates

Cons

  • Discharge power is limited to 10W
  • Charge leads and balance boards are not confirmed in the supplied data
  • PC features require separate software installation

Best for

Hobbyists charging two packs at once across mixed chemistries

Not ideal for

Users who need high-power discharging for large packs

Specifications

Input Voltage (VAC)110 ~ 240
Input Voltage (VDC)11 ~ 18
Output Power (W)2 x 130W
Discharge Power (W)10
Charge Current Range (A)0.1 to 14Ax2
Dischage Current Range (A)0.1-2A
Channels2
Balance Current(mA)500
Drain Current (Id) (A)500
Supported SoftwareCharger Master
Battery TypeLiPo/LiIon/LiFe/LiHV: 1-6cells NiMH/NiCd: 1-15cells Pb: 2-20V
Input TypeAC/DC Both
Li-ion/Po cell count1 ~ 6
NiCd/NiMH cell count1 ~ 15 Cells
Pb battery voltage2 ~ 20
Length (mm)160
Width (mm)150
Weight (g)896
Dimensions (L x W x H) mm160 x 150 x 75
Shipping Weight1.2 kg
Shipping Dimensions28 × 20 × 10 cm

Frequently Asked Questions

Which battery types can the SkyRC D260 charge?
It supports LiPo, LiIon, LiFe and LiHV packs from 1 to 6 cells, NiMH and NiCd packs from 1 to 15 cells, and Pb batteries from 2 to 20V.
Can it charge two batteries at the same time?
Yes. The D260 has two independent channels, each rated at 130W with a charge current range of 0.1 to 14A.
What input voltage does it need?
It accepts 110-240VAC from mains or 11-18VDC from a battery or other DC source, so it works on the bench and in the field.
Does it balance lithium packs?
Yes, balance current is 500mA and the charger supports balance charging for lithium chemistries within the stated cell counts.
Can it be used as a power supply?
Yes. In power supply mode each channel can power a separate hobby device.
What software does it work with?
The charger is supported by Charger Master software, which can start and stop charging, show real-time graphs and handle firmware upgrades.

Overview

The SkyRC D260 Duo is a compact dual-channel charger built for hobbyists who juggle more than one battery pack at a time. Inside the 160 x 150 x 75mm case are two fully independent circuits, each rated at 130W and able to deliver up to 14A of charge current. That means you can top up a flight pack on one channel while cycling a receiver pack on the other.

It is more than a charger. The D260 also discharges, balances and can act as a DC power supply, so it earns its place on the bench rather than sitting in a drawer between sessions.

Key Features

  • Dual independent outputs: two channels, 2 x 130W, charge current from 0.1 to 14A per channel.
  • Wide chemistry support: LiPo, LiIon, LiFe and LiHV at 1-6 cells, NiMH and NiCd at 1-15 cells, and Pb from 2 to 20V.
  • LiHV mode: charges high-voltage lithium packs to a 4.35V end-of-charge voltage.
  • Balance and drain: 500mA balance current and 500mA drain current for keeping cells in line.
  • AC or DC input: universal 110-240VAC mains or 11-18VDC from a battery pack in the field.
  • Power supply mode: use each channel to power separate hobby equipment.
  • Temperature-controlled cooling: a sleeve-bearing fan pushes air through an extruded aluminium heat sink.
  • Charger Master software: start and stop charging, view real-time graphs and update firmware from a PC.

Specifications Explained

The 2 x 130W rating is the headline. Each channel has its own power budget, so charging two packs does not halve the current available to either one beyond that 130W ceiling. At 14A maximum, small packs charge quickly and larger packs are still handled comfortably within the wattage limit.

Cell counts define what fits: 1-6S lithium packs, 1-15 cell nickel packs and lead-acid batteries between 2 and 20V. The 500mA balance current is the rate at which the charger can bleed down higher cells during balance charging, and the matching 500mA drain current applies when discharging through the balance lead.

Discharge power is rated at 10W with a 0.1-2A current range, which is suited to storage preparation and gentle cycling rather than fast discharge. The charger weighs 896g, so it travels easily.

Compatibility and Requirements

You need a suitable charge lead or balance board for your pack connector, which is not listed in the supplied data. For mains operation, any 110-240VAC supply works. For field use, a DC source between 11 and 18V is required. PC features need the Charger Master software installed on a compatible computer.

Typical Uses

Bench charging of two lithium packs before a flying session, storage-level discharging after a day out, cycling nickel packs, maintaining a lead-acid field battery, or powering small hobby devices from the DC supply mode. The dual channels also suit pilots who fly mixed chemistries and do not want two separate chargers on the table.

What's in the Box

Package contents are not confirmed in the available product data. Check the listing details before ordering to confirm which leads and accessories are included.

Quick specs

Input Voltage (VAC)
110 ~ 240
Input Voltage (VDC)
11 ~ 18
Output Power (W)
2 x 130W
Discharge Power (W)
10
Charge Current Range (A)
0.1 to 14Ax2
Dischage Current Range (A)
0.1-2A
See all specifications