
1 / 3 · Click to enlarge
AI Summary
A dual-channel AC/DC balance charger delivering 400W total for LiPo, LiFe, LiIon, LiHV, NiMH, NiCd and Pb packs. It charges two batteries simultaneously with independent settings and up to 20A per channel.
Key Highlights
- Dual independent channels charge two different batteries at once
- 400W total charging power with up to 20A per channel
- Supports LiPo, LiFe, LiIon, LiHV, NiMH, NiCd and Pb chemistries
- AC 100-240V or DC 11-18V input for bench or field use
- 500mA balance current for accurate cell equalisation
- USB PC control and firmware updates via Charger Master software
Ideal For
- RC pilots who need to charge two battery types at once
- Drone hobbyists flying 1-7S lithium packs
- Car and boat racers using NiMH and LiPo batteries
- Field users who want AC/DC input flexibility
- Hobbyists who value PC data logging and firmware updates
Buying Tip
Check that your battery connectors match the included XT60 and banana cables, or plan to use adapters, since the charger does not include every connector type.
Elecvora expert review
Our verdict
The SkyRC D400 is a capable dual-channel charger that covers a wide range of battery chemistries with sensible power distribution and useful PC features. It suits hobbyists who need to charge two packs simultaneously without buying two separate chargers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent channels with separate settings
- Broad chemistry support including LiHV and Pb
- AC/DC input for bench and field use
- DC power supply mode on Channel 2
- PC control and firmware updates via USB
Cons
- Channel 2 is limited to 100W charging power
- No battery or connector adapters beyond those listed
- Requires a PC and software for advanced data analysis
Best for
RC hobbyists who regularly charge multiple battery types and want a single dual-channel solution.
Not ideal for
Users who only charge one battery type occasionally and do not need dual outputs.
Specifications
| Input Type | AC/DC Both |
|---|---|
| Manufacturer | SkyRC |
| Input Voltage (VAC) | 100-240 |
| Input Voltage (VDC) | 11-18V |
| Charging Power (W) | 400W |
| Discharge Power (W) | 36W |
| Continuous Discharge Current (A) | 0.1A-5A |
| Charge Current Range (A) | 0.1-20A |
| Balance Current(mA) | 500mA |
| Supported Software | Charger Master |
| Channels | 1 |
| Weight (g) | 2510 |
| Dimensions (L x W x H) mm | 258 x 194 x 82.5 |
| Shipping Weight | 2.51 kg |
| Shipping Dimensions | 38 × 25 × 12 cm |
What's in the box
- 1 x SkyRC D400 charger
- 1 x Power cord
- 2 x XH adaptor
- 2 x Banana connectors with XT60 connector charging cable
- 2 x Charging cable
- 1 x User manual
Frequently Asked Questions
Can the D400 charge two different battery types at the same time?
What is the maximum charge current per channel?
Can I use the D400 as a power supply?
Does the charger include balance boards for different connectors?
How do I update the firmware?
What input voltage does the D400 accept?
Overview
The SkyRC D400 is a twin-channel balance charger and discharger built for hobbyists who work with multiple battery types and want to charge two packs at the same time. Each channel has its own circuit and settings, so you can prepare a LiPo flight pack on one output while topping up a NiMH receiver battery on the other. With 400W of total charging power and a 20A maximum current per channel, the D400 covers everything from small 2S packs to larger 7S LiPo assemblies.
Key Features
- Dual-channel design: Two fully independent charging outputs with separate parameters.
- 400W charging power: 300W on Channel 1 and 100W on Channel 2 for simultaneous charging.
- Wide chemistry support: LiPo, LiFe, LiIon and LiHV (1-7S), NiMH and NiCd (1-18S), and Pb (2-24V).
- AC/DC input: Runs from 100-240V mains or an 11-18V DC source such as a field battery.
- DC power supply mode: Channel 2 can output up to 150W to power external devices.
- Balance charging: 500mA balance current for precise cell equalisation on lithium packs.
- PC connectivity: USB link to a computer for data analysis and firmware updates using Charger Master software.
- Discharge function: 36W discharge power with 0.1-5A current for battery maintenance.
Specifications Explained
The 400W total charging power is split between the two channels, with Channel 1 capable of 300W and Channel 2 limited to 100W. This means you can charge a large pack on Channel 1 at high current while using Channel 2 for a smaller battery or as a DC power supply. The 20A maximum charge current per channel suits high-capacity packs that benefit from faster charge rates, while the 0.1A minimum allows slow charging for small receiver batteries. The 500mA balance current helps keep lithium cells in balance during charge, which is important for pack longevity and safety. The discharge power of 36W and current range of 0.1-5A let you bring packs down to storage voltage or test capacity without an external load.
Compatibility and Requirements
The D400 supports lithium chemistries (LiPo, LiFe, LiIon, LiHV) from 1 to 7 cells in series, NiMH and NiCd from 1 to 18 cells, and Pb batteries from 2 to 24V. It accepts AC mains voltage from 100 to 240V or DC input from 11 to 18V. For PC control and firmware updates, a USB connection and the Charger Master software are required. The charger weighs 2510g and measures 258 x 194 x 82.5mm, so it needs a stable surface with adequate ventilation.
Typical Uses
The D400 is well suited to RC hobbyists who fly or drive models using multiple battery types. Drone pilots can charge two LiPo flight packs at once, while car and boat users can prepare NiMH packs alongside lithium receiver batteries. The DC power supply mode on Channel 2 is handy for powering small field equipment. The discharge function makes it easy to store packs at the correct voltage after a session.
What's in the Box
- 1 x SkyRC D400 charger
- 1 x Power cord
- 2 x XH adaptor
- 2 x Banana connectors with XT60 connector charging cable
- 2 x Charging cable
- 1 x User manual


Quick specs
- Input Type
- AC/DC Both
- Manufacturer
- SkyRC
- Input Voltage (VAC)
- 100-240
- Input Voltage (VDC)
- 11-18V
- Charging Power (W)
- 400W
- Discharge Power (W)
- 36W
















