
1 / 5 · Click to enlarge
AI Summary
The SkyRC Q200neo is a four-channel smart charger that can charge four battery packs simultaneously from AC or DC power. Its 800mA balance current and 10A per-channel output make it a practical choice for RC enthusiasts who want to spend less time charging and more time flying or driving.
Key Highlights
- Four independent charging channels for simultaneous battery preparation
- Dual AC 100-240V and DC 10-30V input for home or field use
- Up to 200W total in AC mode and 400W total in DC mode
- Charge current adjustable from 0.1A to 10A per channel
- 800mA maximum balance current for efficient cell equalisation
- Supports LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, and Pb batteries
Ideal For
- FPV pilots who need to charge several LiPo packs before a session
- RC car racers managing multiple battery packs on race day
- Hobbyists who want a single charger for LiPo, LiHV, LiFe, NiMH, and Pb batteries
- Drone operators who require parallel charging from AC or DC power
- RC enthusiasts looking for a compact four-channel charger with a colour display
Buying Tip
Check that your DC power source can supply enough current for the total wattage you plan to use, especially if you intend to charge multiple large packs at high rates.
Elecvora expert review
Our verdict
The SkyRC Q200neo is a versatile four-channel charger that covers a wide range of battery chemistries and offers good power output in a compact package. Its dual AC/DC input and 800mA balance current make it a practical choice for RC enthusiasts who value efficiency and flexibility.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four independent channels for simultaneous charging
- Dual AC/DC input adds flexibility for home and field use
- Supports LiPo, LiHV, LiFe, LiIon, NiMH, NiCd, and Pb
- 800mA balance current and ±0.02V equalisation
- Colour display and PC software compatibility
Cons
- AC mode total power is limited to 200W, which may be insufficient for some large packs
- DC power supply or battery not included
- Requires careful reading of safety instructions due to battery risks
Best for
RC hobbyists who need to charge multiple packs of various chemistries efficiently
Not ideal for
Users who only charge one battery at a time and prefer a simpler, lower-cost charger
Specifications
| Input Voltage (VDC) | 10 to 30 |
|---|---|
| Input Voltage (VAC) | 100-240 |
| Discharging Power (W) | Main port: 5W Balance port: 25W MAX (LiPo/6S) |
| Battery Type | LiPo/LiHV/LiFe/LiIon: 1-6cells NiMH/NiCd: 2-15cells Pb: 3S/6S/12S |
| Display Type | TN |
| Display Size (Inch) | 2.8 |
| Display Resolution (pixel) | 320×240 |
| No. of Colors | 262K |
| Shell Material | PC-ABS V0 |
| Length (mm) | 123 |
| Width (mm) | 119 |
| Weight (g) | 680 |
| Channel | 4 |
| Dimensions (L x W x H) mm | 123 x 119 x 78mm |
| Continuous Discharge Current (A) | 0.1-2.0A |
| Charge Current Range (A) | 0.1-10A |
| Balance Current(mA) | 800mA Max |
| Supported Software | SKYRC charge master |
| Shipping Weight | 0.79 kg |
| Shipping Dimensions | 14 × 13 × 11 cm |
Frequently Asked Questions
Can the Q200neo charge four batteries at once?
What battery types does the Q200neo support?
What is the maximum charge current per channel?
Does the Q200neo include a DC power supply?
Can I use the Q200neo with a computer?
Is the Q200neo suitable for beginners?
Overview
The SkyRC Q200neo is a quad-channel smart balance charger built for RC enthusiasts who manage multiple battery packs. With four independent charging ports, it lets you charge, balance, discharge, or storage-charge several batteries at once, reducing the time you spend waiting on a single charger. The unit accepts both AC mains power (100-240V) and DC input (10-30V), so you can use it at home or connect it to a suitable power supply or battery at the track or field.
In AC mode, the Q200neo delivers a total charging power of up to 200W, distributed dynamically across the active channels. When powered from a DC source, total output rises to 400W, with a single port capable of up to 100W. Each channel supports a charge current range of 0.1A to 10A, giving you fine control over charging speed for small receiver packs or larger flight batteries. The built-in balancer provides up to 800mA balance current per cell and voltage equalisation accuracy of ±0.02V, helping to keep cells in good condition.
Key Features
- Four independent channels: Charge up to four batteries simultaneously, each with its own settings.
- Dual input: AC 100-240V for wall power, or DC 10-30V for field use with a suitable power source.
- High power output: 200W total in AC mode, 400W total in DC mode, with up to 100W per port on DC.
- Wide chemistry support: LiPo, LiHV, LiFe, LiIon (1-6 cells), NiMH/NiCd (2-15 cells), and Pb (3S/6S/12S).
- Precision balancing: 800mA balance current and ±0.02V equalisation for consistent cell voltages.
- Clear display: 2.8-inch TN colour screen (320x240, 262K colours) for easy monitoring.
- PC software: Compatible with SKYRC Charge Master for firmware updates and advanced control.
Specifications Explained
Input voltage: The charger can run from a standard wall socket (100-240V AC) or from a DC source between 10V and 30V. This flexibility means you can use it at home without a separate power supply, or at the field with a suitable DC power source such as a car battery or portable power station.
Charging power: In AC mode, the total output is 200W, which is shared across the channels you are using. In DC mode, the total output increases to 400W, and a single channel can deliver up to 100W. This makes the Q200neo suitable for larger packs when powered from DC.
Charge current: Each channel can be set from 0.1A to 10A. Lower currents are useful for small batteries, while higher currents can speed up charging of larger packs, within the battery manufacturer's recommended limits.
Balance current: The 800mA balance current helps equalise cell voltages during charging. The voltage equalisation optimisation of ±0.02V means the charger works to keep cells closely matched, which can contribute to battery health and performance.
Discharging: The main port can discharge at up to 5W, while the balance port can discharge at up to 25W (for LiPo up to 6S). This is useful for bringing packs to storage voltage or safely discharging them after use.
Display: The 2.8-inch TN colour display (320x240 resolution) shows charging status, cell voltages, and other parameters clearly.
Compatibility and Requirements
The Q200neo supports the following battery types:
- LiPo, LiHV, LiFe, LiIon: 1-6 cells
- NiMH, NiCd: 2-15 cells
- Pb: 3S, 6S, 12S
For AC operation, simply connect the supplied AC cord to a 100-240V wall outlet. For DC operation, you will need a DC power source (10-30V) with sufficient current capability, such as a suitable power supply or a car battery. The charger does not include a DC power supply or battery. SKYRC Charge Master software is available for PC and allows you to monitor and control the charger from a computer; a compatible USB cable may be required (check the manual for details).
Always read the instruction manual and safety notes before use. Battery charging can be dangerous if misused, and the Q200neo is not intended for use by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed.
Typical Uses
- Charging multiple LiPo packs for FPV racing or freestyle sessions.
- Preparing NiMH batteries for RC cars or trucks.
- Storage-charging LiPo batteries at the end of a flying day.
- Balancing and maintaining LiHV or LiFe packs for long-term health.
- Discharging packs to a safe voltage before storage.
- Charging Pb batteries for field boxes or starter boxes.
What's in the Box
Package contents are not specified in the provided data. Please refer to the product manual or retailer listing for details on included accessories.



Quick specs
- Input Voltage (VDC)
- 10 to 30
- Input Voltage (VAC)
- 100-240
- Discharging Power (W)
- Main port: 5W Balance port: 25W MAX (LiPo/6S)
- Battery Type
- LiPo/LiHV/LiFe/LiIon: 1-6cells NiMH/NiCd: 2-15cells Pb: 3S/6S/12S
- Display Type
- TN
- Display Size (Inch)
- 2.8
















