Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SLS, this multi-brand battery chargers is a good fit for makers, students and electronics hobbyists. Main specs: relay x2 for AC control, x2 solenoid lock, x2 ventilation; interface x2 Control Pilot, x2 Proximity Pilot; batteries required Supported.

Key Highlights

  • Relay: x2 for AC control, x2 solenoid lock, x2 ventilation
  • Interface: x2 Control Pilot, x2 Proximity Pilot
  • Batteries Required: Supported

Ideal For

  • Powering projects and devices
  • Spare or replacement pack
  • Portable builds

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Relayx2 for AC control, x2 solenoid lock, x2 ventilation
Interfacex2 Control Pilot, x2 Proximity Pilot
Batteries RequiredSupported
Display4.3” Graphics Display & 20x4 Character LCD
Current (A)Up to 32A (1-Phase), Up to 80A (3-Phase)
ProtocolOCPP 1.6J, FOTA upgradeable to 2.0
CommunicationEthernet, GSM, WiFi
Length (mm)225
Width (mm)120
Weight (g)241
Shipping Weight0.32 kg
Shipping Dimensions28 × 15 × 5 cm

Overview

The Verycon 2.0 EV Charger Controller Board with GSM Module, made by SLS, is listed in our multi-brand battery chargers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Relay: x2 for AC control, x2 solenoid lock, x2 ventilation
  • Interface: x2 Control Pilot, x2 Proximity Pilot (confirm your cable or board uses the same connector)
  • Batteries Required: Supported (confirm your cable or board uses the same connector)
  • Display: 4.3” Graphics Display & 20x4 Character LCD (measured diagonally; compare with the space you have before ordering)
  • Current (A): Up to 32A (1-Phase), Up to 80A (3-Phase) (your supply must deliver at least this much current)
  • Protocol: OCPP 1.6J, FOTA upgradeable to 2.0
  • Communication: Ethernet, GSM, WiFi (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Length (mm): 225 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Accelerate your EV charging station development with Verycon 2.0, EV Charger Controller Borad the advanced charge controller from VerdeMobility. Designed for faster time-to-market and seamless integration, Verycon 2.0 supports up to three outputs and a variety of connectivity options including Ethernet, WiFi, and GSM. EV Charger Controller Board Built to support global charging standards (IEC61851-22), it includes built-in Class 1 energy metering, dual display options, CP/PP interface, RFID authentication, and relay outputs for complete control. EV Charger Controller Board Whether you're building public, fleet, or residential chargers, Verycon 2.0 offers unmatched flexibility and performance, making it the perfect solution to power your next-gen EV charging infrastructure.


Features:

  1. Compatible with IEC61851-22 (Mode 3)
  2. Supports up to 3 charging outputs
  3. Inbuilt Class 1 3-phase energy meter
  4. Multi-protocol support: Ethernet, WiFi, GSM, OCPP 1.6J (upgradable to 2.0)
  5. Dual display options (4.3” Graphic and 20x4 Character LCD)
  6. Emergency stop, RFID access, and ventilation control supported

Package Includes:

1 x Verycon 2.0 EV Charger Controller Board with GSM Module

Quick specs

Relay
x2 for AC control, x2 solenoid lock, x2 ventilation
Interface
x2 Control Pilot, x2 Proximity Pilot
Batteries Required
Supported
Display
4.3” Graphics Display & 20x4 Character LCD
Current (A)
Up to 32A (1-Phase), Up to 80A (3-Phase)
Protocol
OCPP 1.6J, FOTA upgradeable to 2.0
See all specifications