Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Three small ball caster wheels with steel balls and plastic caps, each supporting up to 5 kg. Their omnidirectional design makes them ideal for adding smooth, flexible movement to small robots and DIY projects.

Key Highlights

  • Pack of three ball caster wheels for omnidirectional motion
  • Steel ball construction with plastic cap for durability
  • Each wheel supports up to 5 kg load capacity
  • 27.5 mm base plate with three 3.4 mm mounting holes
  • Lightweight at 15 g per wheel for minimal added mass
  • 120-degree hole spacing for balanced mounting

Ideal For

  • Small robot builders needing a passive support wheel
  • DIY enthusiasts creating custom RC vehicles
  • Students working on line-following or maze-solving robots
  • Makers building camera sliders or lightweight platforms
  • Prototyping projects requiring omnidirectional movement

Buying Tip

Check that your chassis has mounting holes spaced to match the 120-degree pattern with a 3.4 mm diameter, and use screws of suitable length to avoid protruding into the ball area.

Elecvora expert review

Our verdict

These small ball casters offer a simple, lightweight way to add omnidirectional support to small projects. The steel ball and plastic cap construction is adequate for light loads, though they are best suited for smooth indoor surfaces.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Low cost for a pack of three
  • Lightweight design minimizes impact on payload
  • Easy to mount with standard screws
  • Smooth omnidirectional movement

Cons

  • Not suitable for rough or uneven surfaces
  • Plastic cap may wear under heavy use
  • Mounting screws not included

Best for

Small indoor robots and lightweight DIY projects

Not ideal for

Heavy-duty or outdoor applications on rough terrain

Specifications

Item TypeCaster Wheel
Base Plate Diameter(mm)27.5
Caster Wheel Diameter(mm)13.5
Ball MaterialSteel
Additional Specs.Cap Material: Plastic
Weight (g)15
Load Capacity (Kg/Wheel)5
Mounting Hole Diameter (mm)Three, 120° apart, 3.4mm diameter
Shipping Weight0.018 kg
Shipping Dimensions8 × 8 × 4 cm

What's in the box

  • 3 x Ball caster wheel Small

Frequently Asked Questions

What is the maximum load capacity per wheel?
Each ball caster wheel supports up to 5 kg when used on a flat, smooth surface.
Are mounting screws included?
No, mounting screws are not included. You will need three screws or bolts with a diameter that fits the 3.4 mm mounting holes.
Can these casters be used outdoors?
They are designed for smooth indoor surfaces. Using them on rough or uneven outdoor terrain may cause poor performance or damage.
What is the diameter of the ball?
The steel ball has a diameter of 13.5 mm.
How many casters are in one pack?
The package includes three ball caster wheels.
Do these casters require any maintenance?
Occasional cleaning of the ball and cap to remove dust and debris is recommended to maintain smooth movement.

Overview

The Small Ball Caster Wheel 3 pcs set offers a practical solution for adding omnidirectional support to small robotic platforms and DIY mechanical projects. Each caster consists of a steel ball retained by a plastic cap, mounted on a compact base plate. The ball rotates freely in any direction, allowing attached structures to glide smoothly across flat surfaces. With a load capacity of 5 kg per wheel and a weight of just 15 g each, these casters are well-suited for lightweight applications where low friction and multi-directional movement are required.

Key Features

  • Omnidirectional movement: The ball design enables motion in any direction without a fixed steering axis.
  • Steel ball: Provides durability and smooth rolling contact with the ground.
  • Plastic cap: Keeps the assembly lightweight while securely holding the ball.
  • Three-hole mounting: Base plate has three 3.4 mm holes spaced 120 degrees apart for stable attachment.
  • Compact size: 27.5 mm base plate diameter and 13.5 mm wheel diameter suit tight spaces.
  • Three-pack: Supplied as a set of three casters for multi-point support.

Specifications Explained

Base Plate Diameter (27.5 mm): The mounting base is compact, making it easy to fit on small chassis without overhang. Caster Wheel Diameter (13.5 mm): The steel ball itself is small, suitable for low-clearance applications and smooth indoor surfaces. Load Capacity (5 kg per wheel): Each caster can support up to 5 kg, so a set of three can handle a combined load when distributed evenly. Mounting Hole Diameter (3.4 mm): The three holes are sized for common small screws or bolts, and their 120-degree spacing ensures balanced force distribution. Weight (15 g): Lightweight construction minimizes added mass to your project.

Compatibility and Requirements

These casters are designed for flat, smooth surfaces. Mounting requires three screws or bolts of appropriate length and diameter (not included) that fit through the 3.4 mm holes. The base plate must have corresponding holes or be drilled to match the 120-degree pattern. No additional power or wiring is needed. The casters are suitable for use with small robots, RC vehicles, and custom mechanical assemblies where a passive support wheel is needed.

Typical Uses

Common applications include small ground robots, line followers, camera sliders, DIY RC projects, and prototype vehicles that require a low-friction third or fourth contact point. The omnidirectional nature helps robots turn smoothly and navigate tight spaces. They can also be used in lightweight furniture or display stands that need to be moved occasionally.

What's in the Box

Three ball caster wheels. Mounting hardware is not included.

Quick specs

Item Type
Caster Wheel
Base Plate Diameter(mm)
27.5
Caster Wheel Diameter(mm)
13.5
Ball Material
Steel
Additional Specs.
Cap Material: Plastic
Weight (g)
15
See all specifications