
1 / 3 · Click to enlarge
AI Summary
A compact SMD vibration motor rated at 2.7 VDC and 75 mA, spinning at 14,000 ±3,000 RPM. It reflow-solders directly to a PCB, making it useful for space-constrained designs that need vibration feedback.
Key Highlights
- Surface mount SMD body for direct PCB reflow soldering
- Rated at 2.7 VDC with a typical current draw of 75 mA
- Rated speed of 14,000 RPM with ±3,000 RPM tolerance
- Compact 11.4 mm length, 4 mm width and 3.3 mm height
- Suited to compact electronics and automotive-style assemblies
- Lightweight part with shipping weight of about 0.015 kg
Ideal For
- Electronics designers laying out compact PCBs with vibration feedback
- Automotive electronics engineers working with board-mounted components
- Repair technicians replacing a failed SMD vibration motor
- Makers and hobbyists comfortable with reflow soldering
- Product developers prototyping small haptic assemblies
Buying Tip
Check your board pads and reflow profile against this 11.4 x 4 mm SMD footprint before ordering, since the part cannot be hand-wired like a leaded motor.
Elecvora expert review
Our verdict
A sensible component choice when you need vibration on a board and cannot afford the space or assembly time of a wired motor. The trade-off is that it demands proper reflow tooling and a supply matched to its 2.7 VDC rating.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Reflow-solderable SMD body simplifies board assembly
- Small 11.4 x 4 x 3.3 mm size suits tight layouts
- Low 2.7 VDC rating and 75 mA draw are easy to supply
- 14,000 RPM output gives quick, noticeable vibration
Cons
- Requires reflow soldering equipment, not hand wiring
- Speed tolerance of ±3,000 RPM limits precision use
- Only one motor is supplied per pack
Best for
Board-level designs needing compact vibration feedback
Not ideal for
Users without SMD soldering capability or reflow access
Specifications
| Item Type | SMD Type |
|---|---|
| Voltage Rating (V) | 2.7VDC |
| Current | 75 |
| Rated Speed (RPM) | 14,000±3,000, 14000 |
| Rated Voltage (VDC) | 2.7 |
| Rated current (mA) | 75 |
| Length (mm) | 11.4 |
| Width (mm) | 4 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 9 × 7 × 1 cm |
What's in the box
- 1 x SMD type Vibration motor H3.3 x W4.1 x L11.4 with 14,000 ±3,000 RPM
Frequently Asked Questions
What voltage does this motor need?
How fast does it spin?
Can I solder it by hand?
What are the physical dimensions?
How many motors are included?
How should I handle and store it?
Overview
This SMD vibration motor is a surface mount component designed to be soldered directly onto a printed circuit board. Instead of flying leads, the motor is attached through a reflow process: solder paste is applied to the pads, the part is placed, and heat melts the paste to create the electrical and mechanical joint. That approach keeps the assembly flat and compact, which matters when board space is tight.
The motor is a generic part with a small body of roughly 3.3 mm height, 4.1 mm width and 11.4 mm length. It is rated for 2.7 VDC operation and draws around 75 mA at that voltage, turning at a rated 14,000 RPM with a tolerance of ±3,000 RPM.
Key Features
- Surface mount design: built for reflow soldering onto a PCB rather than hand-wired connection.
- Low voltage operation: rated at 2.7 VDC, matching low-voltage board rails.
- Modest current draw: approximately 75 mA at the rated voltage.
- Fast rotation: 14,000 RPM rated speed with ±3,000 RPM tolerance.
- Compact footprint: 11.4 mm long, 4 mm wide and 3.3 mm high.
Specifications Explained
Voltage and current: the 2.7 VDC rating is the supply the motor is specified at, and 75 mA is the current it draws there. Design your driver and trace widths around those figures rather than assuming a wider range.
Rated speed: 14,000 RPM is the nominal rotation rate, and the ±3,000 RPM tolerance means individual units may run somewhat faster or slower. Treat the figure as a design target, not a precision guarantee.
Dimensions: the 11.4 mm length, 4 mm width and 3.3 mm height define the board area and clearance you need to reserve. Check these against your enclosure and neighbouring components before layout.
Mounting method: as an SMD part, it is intended for reflow soldering. Plan pads and paste deposition accordingly.
Compatibility and Requirements
This motor requires a PCB with suitable solder pads and a reflow soldering process. It needs a 2.7 VDC supply capable of delivering roughly 75 mA, and it should be driven with control circuitry appropriate to a motor load. Confirm that your board layout accommodates the 11.4 x 4 mm footprint and the 3.3 mm height before ordering.
Typical Uses
Given its surface mount format and small size, the motor suits compact electronic assemblies that need vibration feedback or a small rotating mass. The surface mount construction is also relevant to automotive electronics work, where board-mounted components are common. It is a component for prototyping, repair and production builds rather than a finished consumer product.
What's in the Box
One SMD vibration motor, H3.3 x W4.1 x L11.4 mm, rated 14,000 ±3,000 RPM.
Quick specs
- Item Type
- SMD Type
- Voltage Rating (V)
- 2.7VDC
- Current
- 75
- Rated Speed (RPM)
- 14,000±3,000, 14000
- Rated Voltage (VDC)
- 2.7
- Rated current (mA)
- 75













