
1 / 3 · Click to enlarge
At a glance
This radar sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Flow Meter Sensor; model no. / name Radar Flow Meter Sensor; power supply voltage (v) 10–30. Check that your power source supplies 10–30 before connecting it.
Key Highlights
- Item Type: Flow Meter Sensor
- Model No. / Name: Radar Flow Meter Sensor
- Power Supply Voltage (V): 10–30
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Flow Meter Sensor |
|---|---|
| Model No. / Name | Radar Flow Meter Sensor |
| Power Supply Voltage (V) | 10–30 |
| Distance Measuring Range(M) | 0.1 – 65 |
| Radar Frequency Band(GHz) | 24 GHz (velocity), 76–81 GHz (distance) |
| Interface | RS485, ModBus-RTU |
| Precision Rating | ±2% velocity, ±1mm distance |
| Length (mm) | 210 |
| Width (mm) | 110 |
| Weight (g) | 922 |
| Shipping Weight | 1.075 kg |
| Shipping Dimensions | 28 × 13 × 13 cm |
Overview
The SN-3003-RAD-N01, Radar Flow Meter Sensor (RS485) is listed in our radar sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Flow Meter Sensor
- Model No. / Name: Radar Flow Meter Sensor
- Power Supply Voltage (V): 10–30 (match this to your power supply; too high a voltage can damage the part)
- Distance Measuring Range(M): 0.1 – 65 (quoted range is usually line-of-sight; walls and interference shorten it)
- Radar Frequency Band(GHz): 24 GHz (velocity), 76–81 GHz (distance) (make sure the rest of your system works at this frequency)
- Interface: RS485, ModBus-RTU (confirm your cable or board uses the same connector)
- Precision Rating: ±2% velocity, ±1mm distance
- Length (mm): 210 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
A Radar Flow Meter Sensor series product, which can be used with our company's water and rain condition poles and host, has 485 communication, standard ModBus-RTU communication protocol, and the longest communication distance is 2000 m. The product power supply is a 10-30 V wide voltage power supply, mainly used in canals, rivers, and other occasions that require flow and water level monitoring. This sensor can detect water flow rate and water level. The flow meter is used to collect the surface flow rate of the fluid and calculate the average flow rate of the water section through the model.
The water level measured by the water level meter and the cross-sectional information are then used to calculate the cross-sectional area of the flow. The flow rate is then obtained using the formula flow rate = average flow rate × cross-sectional area of the flow × correction coefficient, where the correction coefficient is calculated based on the standard value obtained in the actual measurement environment.
Features:
- Non-contact radar sensing for flow and level
- Measures water velocity, level, volume, and flow rate
- Dual radar frequency: 24 GHz (velocity), 76–81 GHz (distance)
- Wide voltage power supply: DC 10–30V
- RS485 interface with ModBus-RTU protocol
- High precision: ±2% velocity, ±1mm distance
- Durable in extreme weather (-40℃ to +60℃)
- Long-distance communication up to 2000 meters
Package Includes:
1 x SN-3003-RAD-N01, Radar Flow Meter Sensor (RS485)Quick specs
- Item Type
- Flow Meter Sensor
- Model No. / Name
- Radar Flow Meter Sensor
- Power Supply Voltage (V)
- 10–30
- Distance Measuring Range(M)
- 0.1 – 65
- Radar Frequency Band(GHz)
- 24 GHz (velocity), 76–81 GHz (distance)
- Interface
- RS485, ModBus-RTU













