Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SN390 PCB holder clamps boards up to 20 x 14 cm and rotates 360° for easy soldering from any angle. Its weighted metal base with rubber feet stays put on your bench.

Key Highlights

  • Adjustable clamps hold PCBs up to 20 x 14 cm
  • 360-degree rotation locks at any angle
  • Spring-loaded clamps accommodate 1.2 to 3 mm thickness
  • Solid metal base with four rubber feet for stability
  • Compact 30 x 16.5 x 12.5 cm footprint
  • Lightweight at 650 g for easy repositioning

Ideal For

  • Electronics hobbyists assembling PCBs
  • Repair technicians doing soldering rework
  • Makers prototyping with through-hole components
  • Students learning soldering techniques

Buying Tip

Check that your PCB fits within the 20 x 14 cm clamping area and is between 1.2 mm and 3 mm thick before ordering.

Elecvora expert review

Our verdict

The SN390 is a straightforward, well-built PCB holder that does its job without fuss. Its 360-degree rotation and stable base make soldering more comfortable, especially for repetitive work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy to adjust for different board sizes
  • Rotation mechanism holds position reliably
  • Rubber feet provide good stability
  • Compact footprint saves bench space

Cons

  • Maximum board size is limited to 20 x 14 cm
  • Clamps may obstruct very tall components near board edges
  • No built-in magnification or lighting

Best for

Hobbyists and technicians who need a stable, adjustable PCB holder for soldering and rework.

Not ideal for

Those working with boards larger than 20 x 14 cm or requiring integrated magnification.

Specifications

Item TypePCB Holder
Model No. / NameSN-390
MaterialABS + Metal
PCB Clamping Size (cm)20 X 14
PCB Holder Size (cm)30 X 16.5 X 12.5
Weight (g)650
Shipping Weight0.7 kg
Shipping Dimensions31 × 15 × 12 cm

What's in the box

  • 1 x SN390 Adjustable PCB Holder Frame
  • 1 x User Manual

Frequently Asked Questions

What is the maximum PCB size this holder can clamp?
The SN390 can hold boards up to 20 cm wide and 14 cm deep.
Can I rotate the board while it is clamped?
Yes, the clamp arm rotates a full 360 degrees and stays set at any angle, allowing you to access both sides of the board.
What PCB thicknesses are supported?
The clamps accommodate boards from 1.2 mm to 3 mm thick.
Does it require any power source?
No, the SN390 is a manual tool and does not need electricity or batteries.
What is included in the package?
You receive the SN390 PCB holder frame and a user manual.
How do I clean and maintain the holder?
Wipe the frame and clamps with a dry or slightly damp cloth. Avoid harsh chemicals that could damage the ABS plastic.

Overview

The SN390 Adjustable PCB Holder Frame is a dedicated stand for holding printed circuit boards during soldering, desoldering, and rework. It combines a rigid metal base with ABS clamp arms to keep your board secure while you work. The two spring-loaded clamps grip the edges of the PCB, and the arm rotates a full 360 degrees, letting you access both sides without unclamping. This makes it a useful helper for electronics repair and assembly tasks.

Key Features

  • Adjustable clamping: The clamps open to hold boards up to 20 cm wide and 14 cm deep, and accept thicknesses from 1.2 mm to 3 mm.
  • 360-degree rotation: The clamp arm pivots smoothly and stays set in any position, so you can flip the board to solder both sides.
  • Stable base: The metal base is fitted with four rubber feet that prevent sliding and protect your work surface.
  • Compact and portable: At 30 x 16.5 x 12.5 cm and 650 g, it fits easily on a crowded bench and can be moved as needed.

Specifications Explained

PCB Clamping Size (20 x 14 cm): This is the maximum board size the clamps can hold. Smaller boards are held just as securely because the clamps slide along the frame.

Clamping Thickness (1.2–3 mm): The spring-loaded clamps have multiple steps to grip common PCB thicknesses, from thin prototyping boards to thicker assembled boards.

Material (ABS + Metal): The combination gives a lightweight yet sturdy frame; the metal base adds stability while the ABS arms are non-conductive and gentle on board edges.

Weight (650 g): Heavy enough to stay put during use, but light enough to reposition easily.

Compatibility and Requirements

The SN390 works with any flat PCB within the specified size and thickness range. No power source is required—it is a manual tool. It is suitable for through-hole and surface-mount soldering, as well as desoldering and rework.

Typical Uses

  • Soldering components onto PCBs
  • Desoldering and component removal
  • Rework and repair of electronic assemblies
  • Holding boards for inspection or testing

What's in the Box

  • 1 x SN390 Adjustable PCB Holder Frame
  • 1 x User Manual

Quick specs

Item Type
PCB Holder
Model No. / Name
SN-390
Material
ABS + Metal
PCB Clamping Size (cm)
20 X 14
PCB Holder Size (cm)
30 X 16.5 X 12.5
Weight (g)
650
See all specifications