Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This digital lcr meter is a good fit for DIY builders and repair work. Main specs: item type Assembled Tester; model no. / name GM328A; display 1.8inch 160*128 LCD. Check that your power source supplies DC 6.8V-12V before connecting it.

Key Highlights

  • Item Type: Assembled Tester
  • Model No. / Name: GM328A
  • Display: 1.8inch 160*128 LCD

Ideal For

  • Repairs around the home
  • Electronics bench work
  • Workshop jobs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeAssembled Tester
Model No. / NameGM328A
Display1.8inch 160*128 LCD
Input Voltage (V)DC 6.8V-12V
Max. Operating Current (A)about 30mA, measured when inputting 7.5V DC voltage
Length (mm)78
Width (mm)63
Shipping Weight0.063 kg
Shipping Dimensions10 × 8 × 3 cm

Overview

The Soldered GM328A Transistor Tester DIY Kit (Black English Version Assembled) is listed in our digital lcr meter range and suits DIY builders and repair work. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Assembled Tester
  • Model No. / Name: GM328A
  • Display: 1.8inch 160*128 LCD (measured diagonally; compare with the space you have before ordering)
  • Input Voltage (V): DC 6.8V-12V (match this to your power supply; too high a voltage can damage the part)
  • Max. Operating Current (A): about 30mA, measured when inputting 7.5V DC voltage (match this to your power supply; too high a voltage can damage the part)
  • Length (mm): 78 (measure your mounting space before ordering)
  • Width (mm): 63 (measure your mounting space before ordering)
  • Shipping Weight: 0.063 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Multi-functional transistor tester for automatic detection of NPN and PNP transistors, N channel, P channel, MOSFET and JFET, diodes, dual diode, thyristor, automatic identification of the transistor pinout. It also can be used for frequency measurement and PWM signal generator. Note : HW-849A on board working remains same.  Note: The capacitor must be discharged before measuring capacitance. Otherwise, there is a high possibility that the meter will be damaged.

Features:

  1. Test NPN and PNP triode common emitter current amplification factor, base-emitter threshold voltage, and collector-emitter leakage current at turn-off.
  2. Identification of Darlington transistors through triode base-emitter threshold voltage and high current amplification factor.
  3. Detect power diodes and FET built-in protection diodes.
  4. Test FET gate-source turn-on threshold voltage, drain-source on-resistance, and gate-source capacitance.
  5. It can measure up to 2 resistors at a time, so the adjustable resistors of the three feet can also be measured. If the adjustable resistor is adjusted to the endpoint, only one resistance value can be measured.
  6. For capacitors larger than 90nF, the equivalent series resistance (ESR) is measured at the same time. The resolution of the equivalent series resistance is up to 0.01Ω.
  7. Resistance measurement: Max. 50MΩ
  8. Resistance resolution: 0.01Ω
  9. Capacitance measurement: 25pF~100mF
  10. Capacitance resolution: 1pF
  11. Inductance measurement: 0.01mH~20H

Package Includes:

1 x Soldered GM328A Transistor Tester DIY Kit (Black English Version Assembled)

Quick specs

Item Type
Assembled Tester
Model No. / Name
GM328A
Display
1.8inch 160*128 LCD
Input Voltage (V)
DC 6.8V-12V
Max. Operating Current (A)
about 30mA, measured when inputting 7.5V DC voltage
Length (mm)
78
See all specifications