Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 600 W bench station combining a hot air blower, an MCH soldering iron and a built-in ammeter with USB output. The blower pauses automatically in its cradle, keeping the work area safer between reflow tasks.

Key Highlights

  • 3-in-1 design: hot air blower, MCH soldering iron and ammeter
  • Micro controller regulated blower temperature from 200 to 450 °C
  • 600 W power draw on a 230 VAC supply
  • Built-in SMPS with 5 V/1 A USB output for test mode
  • Ammeter ports for attaching external testing probes
  • Auto-pause blower function when parked in the cradle

Ideal For

  • Electronics repair technicians doing SMD rework
  • Hobbyists building and repairing circuit boards at home
  • Small workshops wanting one bench unit for air and iron work
  • Makers diagnosing small circuits with the built-in ammeter
  • Students learning reflow and hand soldering techniques

Buying Tip

Confirm your mains supply is 230 VAC before buying, since the SL740 is not a dual-voltage unit.

Elecvora expert review

Our verdict

The SL740 packs air, iron and a current meter into one compact metal chassis, which keeps a small bench tidy and reduces plug clutter. It is a sensible mid-range choice for repair work where you need both reflow and hand soldering in the same session.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Three tools in one housing saves bench space
  • Micro controller keeps blower temperature steady across 200 to 450 °C
  • Auto-pause in the cradle adds a useful safety habit
  • Ammeter ports and USB output add diagnostic value
  • Includes three nozzles, cradle, stand and cords

Cons

  • 230 VAC input only, so it will not suit 110-120 V regions
  • No airflow figures or iron temperature range are published
  • Shipping weight of 5.02 kg makes it a fixed bench tool rather than a portable one

Best for

Technicians and hobbyists who want hot air and soldering in one bench unit

Not ideal for

Users in 110-120 V regions or those needing a pocket-portable iron

Specifications

Item TypeSoldering Irons and Stations
MaterialMetallic body with powder coating
Rated Voltage (VDC)230 VAC
Power Consumption (W)600
ControllerMicro Controller
Blower temperature200 to 450 Deg C
Shipping Weight5.02 kg
Shipping Dimensions36 × 30 × 23 cm

What's in the box

  • 1 x Soldering Station
  • 1 x Soldering Iron
  • 1 x Blower
  • 1 x Cradle
  • 1 x Iron Stand
  • 3 x Nozzle
  • 1 x Patchcord
  • 1 x Power Cord

Frequently Asked Questions

What voltage does the SL740 require?
It runs on 230 VAC mains and draws up to 600 W. It is not a dual-voltage station, so check your local supply before use.
What temperature range does the hot air blower cover?
The blower is adjustable from 200 to 450 °C and is regulated by a micro controller. Start low for heat-sensitive parts and raise it for lead-free reflow.
What is the USB port for?
The built-in SMPS provides a 5 V/1 A USB output, and in test mode the output can reach a maximum of 25 V. Treat it as a bench test aid rather than a phone charger.
How does the auto-pause feature work?
When the blower handpiece is placed in the attached cradle, heating pauses automatically. Lift it out again to resume work.
What comes with the station?
The box contains the soldering station, soldering iron, blower, cradle, iron stand, three nozzles, a patchcord and a power cord.
How should I care for the station?
Keep the metal body dry, let the handpieces cool in their cradle and stand before storage, and avoid pulling the cords sharply. Clean nozzles while warm using suitable tools.

Overview

The Soldron SL740 is a single bench unit that covers three jobs that would otherwise need separate equipment: hot air rework, hand soldering and basic current testing. The metal body has a powder-coated finish, and a micro controller looks after the blower temperature so the output stays where you set it. Everything runs from a 230 VAC mains supply and draws up to 600 W.

Key Features

  • Hot air blower with an adjustable range of 200 to 450 °C for heating, shrinking and reflow work.
  • MCH soldering iron with a fine bit for precise joints on small pads and fine-pitch components.
  • Built-in SMPS that supplies the station and offers a 5 V/1 A USB output, with up to 25 V available in test mode.
  • Ammeter with probe ports so you can attach testing probes and read current on the same panel.
  • Auto-pause that stops the blower heating when the handpiece is placed in the attached cradle.

Specifications Explained

The 600 W rating tells you the station has enough headroom to run the blower and the iron without constant recovery lag, which matters when you switch between reflow and hand soldering. The 230 VAC input is the standard European and many international mains voltage, so check your local supply before ordering. Blower temperature is adjustable from 200 to 450 °C; lower settings suit heat-sensitive plastic and gentle preheating, while the upper end handles lead-free reflow and stubborn joints. The micro controller is what keeps that range stable rather than drifting as the element cycles.

Compatibility and Requirements

The station requires a 230 VAC mains outlet. It is supplied with a power cord, a patchcord, three nozzles and the cradle and iron stand needed to park both handpieces. The USB output is rated 5 V/1 A, and test mode reaches a maximum of 25 V. No additional controllers or external power supplies are needed to operate the station.

Typical Uses

Use the blower for removing and reflowing surface-mount parts, shrinking heat-shrink tubing and warming boards before soldering. The iron handles through-hole work, wire tinning and touch-ups on fine pads. The ammeter ports are handy for quick current checks on small circuits during repair or diagnosis.

What's in the Box

  • 1 x Soldering station
  • 1 x Soldering iron
  • 1 x Blower
  • 1 x Cradle
  • 1 x Iron stand
  • 3 x Nozzle
  • 1 x Patchcord
  • 1 x Power cord

Quick specs

Item Type
Soldering Irons and Stations
Material
Metallic body with powder coating
Rated Voltage (VDC)
230 VAC
Power Consumption (W)
600
Controller
Micro Controller
Blower temperature
200 to 450 Deg C
See all specifications