
1 / 3 · Click to enlarge
AI Summary
A 50kg cantilever beam load cell in alloy steel with 2.0mV/V output and 0.1% F.S accuracy. Its stable zero point and 0.03% F.S repeatability suit tank, bin and hopper weighing.
Key Highlights
- 50kg rated weighing capacity for tank, bin and hopper systems
- 2.0mV/V rated output for strong signal sensitivity
- 0.1% F.S nonlinearity with 0.03% F.S hysteresis and repeatability
- Alloy steel cantilever beam body for mechanical strength
- 350 Ohm output and 380 Ohm input impedance
- 2000 MOhm insulation resistance for stable signal integrity
Ideal For
- Industrial automation engineers building weight feedback into process equipment
- System integrators specifying tank, bin and hopper weighing
- Maintenance teams replacing beam-type load cells in existing installations
- Manufacturers assembling custom weighing platforms and frames
- Technicians working with strain gauge bridge instrumentation
Buying Tip
Check that your indicator or amplifier supplies no more than 10V excitation and can read a 2.0mV/V bridge before ordering.
Elecvora expert review
Our verdict
The SOPMK-001 is a solid 50kg beam load cell with accuracy figures that suit repeatable industrial weighing. It is a sensible choice when you need a robust alloy steel cell and can supply suitable bridge instrumentation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Good accuracy at 0.1% F.S with 0.03% F.S hysteresis and repeatability
- Strong 2.0mV/V output for reliable signal pickup
- Alloy steel body suited to continuous industrial duty
- High 2000 MOhm insulation resistance
Cons
- Requires a separate indicator or amplifier, which is not included
- Wiring and connector details are not specified in the product data
- Substantial 5400g body needs a properly supported mounting
Best for
Tank, bin and hopper weighing in industrial and automation settings
Not ideal for
Projects needing a complete plug-and-play weighing scale out of the box
Specifications
| Item Type | Load Sensor |
|---|---|
| Weighing Load (kg) | 50 |
| Model No. / Name | SOPMK 001 |
| Zero output | 0.1mV |
| Insulation Resistance (MOhm) | 2000 |
| Output Impedance | 350 Ohm |
| Impedance (Ω) | 380 Ohm |
| Hysteresis | 0.03% F.S |
| Repeatability | 0.03% F.S |
| Length (mm) | 190 |
| Width (mm) | 120 |
| Weight (g) | 5400 |
| Maximum excitation voltage | 10V |
| Shipping Weight | 5.8 kg |
| Shipping Dimensions | 27 × 17 × 19 cm |
What's in the box
- 1 x SOP SOPMK-001 50kg, 2.0mV/V, 0.1%F.S Load Cell Sensor
Frequently Asked Questions
What load is this load cell rated for?
What excitation voltage does it need?
Can I connect it directly to a display?
What is included in the package?
What do the impedance figures mean?
How should I care for the sensor?
Overview
The SOP SOPMK-001 is a cantilever beam load cell rated for 50kg of weighing load. It converts applied force into a millivolt signal that a suitable weighing instrument or amplifier can read. The beam construction is intended for installations where the mounting position has to work around existing structures, which is common in tank, bin and hopper weighing.
The sensing element is made from alloy steel, giving the body the mechanical strength needed for continuous industrial duty. Accuracy is specified at 0.1% F.S, with hysteresis and repeatability each at 0.03% F.S.
Key Features
- Cantilever beam format for flexible mounting in constrained layouts
- 2.0mV/V rated output for a usable signal at rated load
- 0.1% F.S nonlinearity for accurate force and weight detection
- Stable zero point with 0.1mV zero output
- Alloy steel construction for long-term mechanical performance
- 2000 MOhm insulation resistance to help protect signal quality
Specifications Explained
Output and impedance
The 2.0mV/V rated output means the cell produces about 2mV of signal per volt of excitation at full rated load. Output impedance is 350 Ohm and input impedance is 380 Ohm, values that match common strain gauge bridge instrumentation. Maximum excitation voltage is 10V, so the supply should stay at or below that figure.
Accuracy figures
Nonlinearity of 0.1% F.S describes how far the output curve deviates from a straight line across the range. Hysteresis of 0.03% F.S covers the difference between loading and unloading readings, and repeatability of 0.03% F.S covers consistency when the same load is applied again. Together these figures indicate a sensor suited to repeatable process weighing rather than one-off checks.
Physical size
The body measures 190mm long and 120mm wide and weighs 5400g. Plan mounting space and support structure accordingly, since the cell itself is substantial.
Compatibility and Requirements
The SOPMK-001 needs a weighing indicator, transmitter or amplifier that accepts a millivolt-per-volt strain gauge bridge signal and provides excitation of no more than 10V. Wiring and connector details are not specified in the supplied data, so confirm them against the unit you receive before commissioning. The 350 Ohm output impedance should be checked against the input requirements of your readout device.
Typical Uses
- Tank and vessel weighing where the beam can be mounted to existing steelwork
- Bin and hopper level-by-weight monitoring
- Industrial automation force and weight feedback
- Bench or frame-based weighing assemblies in process equipment
What's in the Box
1 x SOP SOPMK-001 50kg, 2.0mV/V, 0.1%F.S Load Cell Sensor.
Quick specs
- Item Type
- Load Sensor
- Weighing Load (kg)
- 50
- Model No. / Name
- SOPMK 001
- Zero output
- 0.1mV
- Insulation Resistance (MOhm)
- 2000
- Output Impedance
- 350 Ohm



















