
1 / 3 · Click to enlarge
AI Summary
The Spectra Symbol Flex Sensor FS-L-055-253-MP is an 80mm bend sensor with 10K Ohm flat resistance and 0.1-inch male pins. It changes resistance as it flexes, making it ideal for robotics, gaming, and motion-sensing projects.
Key Highlights
- 80mm sensing length for compact bend detection
- Flat resistance of 10K Ohms ±30%
- Power rating: 0.5W continuous, 1W peak
- 0.1-inch spaced male pins for breadboard use
- Resistance increases as sensor bends
- Suitable for robotics, gaming, and medical devices
Ideal For
- Makers and hobbyists building gesture-controlled projects
- Robotics engineers needing joint angle feedback
- Game developers creating virtual motion controllers
- Medical device designers for rehabilitation tools
- Students learning about sensors and microcontrollers
Buying Tip
Remember that the sensor's base is sensitive to bending; always flex only the sensing area to avoid damage.
Elecvora expert review
Our verdict
The Spectra Symbol Flex Sensor FS-L-055-253-MP is a reliable and straightforward bend sensor that delivers consistent resistance changes for motion-sensing projects. Its breadboard-friendly pins and compact size make it easy to integrate, though users must handle it carefully to avoid damaging the base.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple to interface with microcontrollers
- Breadboard-ready male pins
- Compact 80mm length
- Wide range of applications
Cons
- Requires external resistor for voltage divider
- Base is sensitive to bending and can be damaged
- Resistance tolerance may require calibration
Best for
Prototyping motion-sensing projects in robotics, gaming, and rehabilitation
Not ideal for
High-precision angle measurement without calibration or harsh environments
Specifications
| Sensor Length (mm) | 80mm |
|---|---|
| Resistance (Ohm) | Flat Resistance: 10K Ohms ±30% |
| Power Rating | 0.5 Watts continuous; 1 Watt Peak. |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 3 × 2 × 1 cm |
What's in the box
- 1 x Spectra Symbol Flex Sensor FS-L-055-253-MP 80mm Bend Sensor with Male Pins
Frequently Asked Questions
How do I connect the flex sensor to an Arduino?
What is the resistance when the sensor is flat?
Can I bend the sensor anywhere along its length?
What is the maximum power the sensor can handle?
Is a microcontroller required to use this sensor?
What is included in the package?
Overview
The Spectra Symbol Flex Sensor FS-L-055-253-MP is a bend-sensitive resistor that changes its electrical resistance when flexed. With an 80mm sensing length, it provides a simple way to measure angle displacement and physical motion in interactive systems. The sensor features male pins spaced at 0.1 inches, making it directly compatible with standard breadboards and jumper wires.
This flex sensor is widely used in robotics, gaming (virtual motion), medical devices, computer peripherals, musical instruments, and physical therapy. Its straightforward construction and reliable performance make it a popular choice for both prototyping and integration into finished products.
Key Features
- Bend-to-resistance response: Resistance increases as the sensor is flexed, allowing easy measurement with a microcontroller.
- Compact size: 80mm length fits into tight spaces and wearable designs.
- Breadboard-friendly: Male pins with 0.1-inch spacing enable quick connections without soldering.
- Durable power handling: Rated for 0.5 Watts continuous and 1 Watt peak, suitable for low-power sensing applications.
- Versatile applications: From gesture recognition to physical therapy, this sensor adapts to many motion-sensing tasks.
Specifications Explained
Sensor Length (80mm): The active sensing area is 80mm long, which determines the span over which bending is detected. This length is ideal for finger, wrist, or small joint movement tracking.
Flat Resistance (10K Ohms ±30%): When the sensor is flat, its resistance is nominally 10K Ohms with a tolerance of ±30%. This value is the baseline for your measurements; as the sensor bends, resistance increases. The tolerance means you may need to calibrate each sensor individually for precise applications.
Power Rating (0.5 Watts continuous; 1 Watt Peak): This indicates the maximum power the sensor can dissipate safely. Continuous operation should stay within 0.5W, while short bursts up to 1W are acceptable. Exceeding these limits may damage the sensor.
Male Pins Connector: The 0.1-inch spaced male pins allow direct insertion into breadboards or female headers, simplifying prototyping and integration.
Compatibility and Requirements
The sensor can be interfaced with any microcontroller that has an analog input, such as Arduino, Raspberry Pi (with ADC), or similar platforms. You will need a pull-up or voltage divider resistor to convert the resistance change into a measurable voltage. No additional drivers are required. The male pins are compatible with standard 0.1-inch pitch breadboards and jumper wires.
Typical Uses
- Angle displacement measurement in robotic joints
- Virtual motion controllers for gaming
- Hand gesture recognition systems
- Medical devices for rehabilitation and physical therapy
- Computer peripherals and musical instruments
What's in the Box
1 x Spectra Symbol Flex Sensor FS-L-055-253-MP 80mm Bend Sensor with Male Pins.
Quick specs
- Sensor Length (mm)
- 80mm
- Resistance (Ohm)
- Flat Resistance: 10K Ohms ±30%
- Power Rating
- 0.5 Watts continuous; 1 Watt Peak.
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 3 × 2 × 1 cm





















