
1 / 3 · Click to enlarge
AI Summary
A 52-beam infrared safety light curtain with a 1020 mm detection height and 20 mm beam pitch for machine guarding. It runs on 12-24V DC with NPN/PNP outputs and detects objects from 0.2 to 2.5 m away.
Key Highlights
- 52 infrared beams at 940 nm with 20 mm optical axis spacing
- 1020 mm effective detection height for guarding machine openings
- Selectable NPN or PNP output to match control wiring
- Sensing distance from 0.2 m up to 2.5 m
- Response time from 4 to 18 ms for fast intrusion detection
- IP54-rated housing in a slim 30 x 30 mm profile
Ideal For
- Machine safety integrators guarding press and forming equipment
- Automation engineers adding access detection to assembly cells
- Maintenance teams replacing worn light curtains on packaging lines
- Factory electricians wiring 12-24V DC safety circuits
- System builders needing a 1020 mm detection height with fine 20 mm resolution
Buying Tip
Confirm your controller accepts an NPN or PNP input and that the 0.2-2.5 m gap between emitter and receiver matches your mounting distance before ordering.
Elecvora expert review
Our verdict
The STD20-52NC is a practical light curtain for standard machine guarding, with dense 20 mm beam spacing and a 1020 mm detection height that suits many access points. Its dual NPN/PNP output and optical synchronisation make wiring straightforward in most control cabinets.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dense 52-beam array with 20 mm pitch for fine detection
- Selectable NPN or PNP output suits different controllers
- Optical synchronisation reduces wiring between units
- Slim 30 x 30 mm housing mounts easily on frames
- IP54 housing handles dusty factory conditions
Cons
- IP54 is not rated for washdown or outdoor exposure
- Response time varies from 4 to 18 ms depending on configuration
- Detection height is fixed at 1020 mm, so taller openings need another model
Best for
Guarding standard machine openings at waist-to-chest height in indoor industrial settings
Not ideal for
Outdoor installations or washdown areas requiring higher water protection
Specifications
| Shipping Weight | 2.182 kg |
|---|---|
| Shipping Dimensions | 110 × 8 × 8 cm |
What's in the box
- 1 x STANBON STD20-52NC Light Curtain Sensor
- 1 x Accessory set
Frequently Asked Questions
What voltage does the STD20-52NC need?
Can I use it with either NPN or PNP inputs?
How far apart can the emitter and receiver be mounted?
What is included with the sensor?
What does the 20 mm pitch mean?
Where can the sensor be used?
Overview
The StanBon STD20-52NC is a safety light curtain designed to detect intrusions into hazardous machine areas. It projects 52 infrared beams at 940 nm across a 1020 mm detection height, with each optical axis spaced 20 mm apart. That combination creates a dense detection field that reacts when an operator or object breaks the beam pattern.
Photo-synchronisation links the emitter and receiver optically, so no separate sync wiring is needed between the two units. This design keeps performance stable in electrically noisy factory environments. The sensor is powered from a 12-24V DC supply and provides NPN or PNP output, allowing it to connect to a broad range of machine control inputs.
Key Features
- 52 optical beams with 20 mm pitch for fine detection across the guarded opening
- 1020 mm detection height to cover standard machine access points
- 0.2 to 2.5 m sensing distance for flexible mounting layouts
- 4 to 18 ms response time for prompt reaction to beam interruptions
- NPN and PNP output modes for compatibility with different control circuits
- IP54 protection against dust and light moisture
- Slim 30 x 30 mm housing that fits along machine frames and guards
Specifications Explained
The 52 beams at 20 mm pitch determine how small an object can be detected. Closer spacing means a hand, tool or component is more likely to interrupt at least one beam, which matters for operator protection.
Detection height of 1020 mm describes the vertical span covered by the beam array. It suits openings around waist and chest height on many machines, though the exact mounting height should match your risk assessment.
Sensing distance of 0.2 to 2.5 m is the working gap between emitter and receiver. The 4 to 18 ms response time indicates how quickly the output reacts after a beam is blocked, and the 12-24V DC supply with ≤100 mA output current keeps wiring within low-voltage control cabinets.
The IP54 rating covers dust ingress and splashes of water, and the -10°C to 55°C operating range with 15%-85% relative humidity suits typical indoor industrial settings.
Compatibility and Requirements
The STD20-52NC requires a regulated 12-24V DC power supply. Its output can be configured as NPN or PNP, so check which input type your machine controller or safety relay expects. The optical synchronisation means only power and output wiring are needed between the emitter and receiver. Mounting hardware is supplied in the accessory set.
Typical Uses
- Guarding press, punch and forming machine openings
- Access detection around automated assembly cells
- Perimeter protection on packaging and handling equipment
- Presence detection at conveyor transfer points
- General industrial automation where beam interruption triggers a stop or alarm
What's in the Box
- 1 x StanBon STD20-52NC light curtain sensor
- 1 x Accessory set for mounting



















