
1 / 7 · Click to enlarge
AI Summary
The STC-3018 DC12V is a dual-display temperature controller that switches heating or cooling relays from an adjustable set point and return difference. Its 1m NTC sensor reads -55°C to +120°C at 0.1°C resolution, with settings retained after power loss.
Key Highlights
- Dual red and blue displays show live and set temperature
- Heating and cooling relay outputs rated 10A at 240VAC
- Wide -55°C to +120°C range with 0.1°C resolution
- Adjustable return difference and multiple alarm modes
- Switch between °C and °F with temperature correction
- 1m NTC 10K sensor and flame-retardant ABS housing
Ideal For
- Growers managing greenhouse or cold-storage temperatures
- Aquarium keepers wanting relay-based temperature switching
- Hobbyists building home temperature control projects
- Farm and smallholding operators monitoring enclosures
- Makers needing a dual-display panel thermostat
Buying Tip
Confirm you have a regulated 12V DC supply available, since the controller needs one and it is not included in the box.
Elecvora expert review
Our verdict
A straightforward dual-display thermostat for low-voltage control panels, with useful relay ratings and a broad temperature range. It suits simple heating or cooling switching where 12V DC power and a 1m probe are enough.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear dual red and blue displays
- Heating and cooling relay outputs
- Wide -55°C to +120°C measuring range
- Return-difference control and alarm modes
- Settings retained after power loss
Cons
- 12V DC power supply not included
- Relay wiring requires care and basic electrical knowledge
- Sensor cable is fixed at 1m
Best for
Small heating or cooling control setups such as greenhouses, cold storage and aquariums
Not ideal for
Applications needing a bundled power supply or longer sensor cable
Specifications
| Voltage Rating | 12 |
|---|---|
| Model No. / Name | STC 3008 |
| Resolution | 0.1 |
| Accuracy | ± 1°C |
| Contact Capacity | 10A/240VAC (Heating Relay output), 10A/240VCA (Cooling Relay output) |
| Sensor | Temperature NTC 10K |
| Sensor Length (mm) | 1.0m |
| Power Consumption (W) | <3W |
| Shell Material | gray ABS flame retardant plastic shell |
| Measuring Temperature (°C) | -55 ° C ~ +120 ° C |
| Shipping Weight | 0.4 kg |
| Shipping Dimensions | 8 × 8 × 4 cm |
What's in the box
- 1 x STC-3018 DC12V dual digital temperature controller thermostat
- 1 x waterproof sensor, attached
Frequently Asked Questions
What power supply does the STC-3018 need?
Can it control both heating and cooling?
What temperature range can it measure?
Is the sensor included?
Will my settings be lost during a power cut?
How do I change the set temperature?
Overview
The STC-3018 is a panel-style temperature controller built around a 12V DC supply. Two digital displays work together: the red readout on the left shows the current temperature, while the blue readout on the right shows the set value. During setup, the same pair of displays shows the setting mode and the value you are adjusting, so you can configure the unit without extra tools.
It is designed to switch a heating or cooling circuit through its relay outputs, using an adjustable return difference to decide when the output turns on and off. That makes it a practical choice for small climate-control jobs where a simple thermostat is not flexible enough.
Key Features
- Dual display: red live temperature and blue set temperature shown at the same time.
- Heating or cooling control: two relay outputs, each rated 10A at 240VAC.
- Adjustable return difference: set the switching band to suit your application.
- Fine resolution: readings to 0.1°C with ±1°C accuracy across the range.
- Temperature correction: trim the reading if your sensor position needs it.
- Alarm modes: several alarm options are available for out-of-range conditions.
- Power-loss memory: parameters remain stored after a sudden power failure.
Specifications Explained
Temperature range and accuracy
The controller measures from -55°C to +120°C, which covers cold storage, aquariums, greenhouses and general room control. Resolution is 0.1°C and accuracy is ±1°C, so it is suited to applications that need clear, repeatable switching rather than laboratory-grade measurement.
Relay outputs
Both the heating and cooling relay contacts are rated 10A at 240VAC. That rating describes the contact capacity; the controller itself is powered from 12V DC. Check that the load you intend to switch stays within the contact rating and is appropriate for the relay output.
Sensor and cable
The supplied NTC 10K sensor is attached to a 1m cable, giving some flexibility in where you place the probe relative to the controller housing.
Power and housing
Power consumption is under 3W. The gray ABS flame-retardant plastic shell is intended for panel or enclosure mounting.
Compatibility and Requirements
The controller requires a 12V DC power supply, which is not listed as part of the package. It works with the supplied NTC 10K sensor on its 1m cable. Wiring should follow the supplied wiring diagram, and any connected heating or cooling equipment must be compatible with a 10A/240VAC relay contact. The product may differ slightly from images in body and cable colour depending on availability.
Typical Uses
- Home temperature control and small room climate setups
- Farm and greenhouse temperature management
- Various cold storage applications
- Aquarium temperature monitoring and switching
What's in the Box
- 1 x STC-3018 DC12V dual digital temperature controller thermostat
- 1 x waterproof sensor, attached


Quick specs
- Voltage Rating
- 12
- Model No. / Name
- STC 3008
- Resolution
- 0.1
- Accuracy
- ± 1°C
- Contact Capacity
- 10A/240VAC (Heating Relay output), 10A/240VCA (Cooling Relay output)
- Sensor
- Temperature NTC 10K













