Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The STC-3018 is a dual-display thermostat that controls both heating and cooling equipment from one compact unit. Its red and blue displays show live and set temperature at once, with 0.1°C resolution across a -55°C to +120°C range.

Key Highlights

  • Red and blue dual digital display shows live and set temperature
  • Heating and cooling relay outputs rated 10A at 240VAC
  • Wide -55°C to +120°C measuring range with 0.1°C resolution
  • NTC 10K sensor with 1.0 m cable included
  • Return-difference control mode for stable switching
  • Switchable °C and °F display with temperature correction

Ideal For

  • Homeowners controlling room or cabinet heating and cooling
  • Cold storage and refrigeration operators
  • Greenhouse and grow-space gardeners
  • Aquarium keepers monitoring water temperature
  • Farm and small agricultural setups

Buying Tip

Confirm that your heater or cooler draws no more than 10A at 240VAC before connecting it to either relay output.

Elecvora expert review

Our verdict

A practical, readable thermostat for simple heating and cooling jobs where dual displays and two relay outputs are useful. It is not a networked controller, but it covers basic temperature switching reliably within its stated ratings.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Clear red and blue dual display
  • Heating and cooling outputs in one unit
  • Wide -55°C to +120°C range
  • Parameters survive power loss
  • Compact ABS flame-retardant housing

Cons

  • Requires mains wiring by a competent installer
  • Relay loads limited to 10A at 240VAC
  • No remote or app control

Best for

Simple heating and cooling control in homes, cold storage, greenhouses and aquariums

Not ideal for

Users needing networked, app-based or multi-zone temperature control

Specifications

Model No. / NameTemperature Controller
Power Supply Voltage (V)110-220VAC
Resolution0.1
Accuracy± 1°C
Contact Capacity10A/240VAC (Heating Relay output), 10A/240VCA (Cooling Relay output)
Sensor TypeNTC 10K Sensor
Sensor Length (mm)1.0m
Power Consumption (W)<3W
Shell Materialgray ABS flame retardant plastic shell
Measuring Temperature (°C)-55 ° C ~ +120 ° C
Shipping Weight0.4 kg
Shipping Dimensions8 × 8 × 4 cm

What's in the box

  • 1 x STC-3018 dual digital temperature controller thermostat
  • 1 x waterproof NTC 10K sensor (attached)

Frequently Asked Questions

What temperature range does the STC-3018 measure?
It measures from -55°C to +120°C with 0.1 resolution and ±1°C accuracy.
Can it control both a heater and a cooler?
Yes. It has separate heating and cooling relay outputs, each rated 10A/240VAC.
What power supply does it need?
The controller runs on 110-220VAC and consumes less than 3W.
Is the temperature sensor included?
Yes, a waterproof NTC 10K sensor with a 1.0 m cable is supplied with the controller.
Will my settings be lost during a power cut?
No. The parameters are retained after a sudden power failure.
Can I change the display between °C and °F?
Yes, the unit supports switching between Celsius and Fahrenheit.

Overview

The STC-3018 is a dual digital temperature controller thermostat built for straightforward temperature switching. Two displays work together: the red tube on the left shows the real-time temperature, while the blue tube on the right shows the set temperature. In setting mode the same displays guide you through parameters, with the red side showing the mode and the blue side showing the value.

The controller accepts a 110-220VAC supply and draws under 3W. It uses an NTC 10K sensor on a 1.0 m cable, measures from -55°C to +120°C, and resolves readings to 0.1 with ±1°C accuracy. The gray ABS flame-retardant shell keeps the unit compact and easy to mount in a panel or enclosure.

Key Features

  • Dual display: red live temperature and blue set temperature on one screen.
  • Heating and cooling outputs: two relays, each rated 10A/240VAC.
  • Return-difference control: a switching band that reduces relay chatter around the setpoint.
  • Alarm modes: several alarm options are available for out-of-range conditions.
  • °C and °F: switch units to suit your preference.
  • Temperature correction: offset the reading when the sensor position affects accuracy.
  • Power-loss memory: parameters remain stored after a sudden power failure.

Specifications Explained

Power supply: 110-220VAC means the controller works on common mains voltages without a separate adapter. Power consumption stays below 3W.

Contact capacity: each relay is rated 10A/240VAC, which sets the ceiling for the heater or cooler you connect. Check the load current of your equipment before wiring.

Sensor: the NTC 10K probe with a 1.0 m lead measures from -55°C to +120°C, covering cold storage through to warm enclosures.

Resolution and accuracy: 0.1 resolution lets you set fine targets, while ±1°C accuracy defines how closely the reading tracks the real temperature.

Compatibility and Requirements

The STC-3018 needs a 110-220VAC mains supply and an NTC 10K sensor, which is supplied. Heating and cooling devices connect to the relay outputs and must stay within the 10A/240VAC contact rating. The unit is intended for panel or enclosure mounting and requires mains wiring, so installation should be carried out by someone comfortable working with line voltage.

Typical Uses

  • Home temperature control and general room or cabinet heating
  • Cold storage and refrigeration monitoring
  • Greenhouse temperature management
  • Aquarium and water-related temperature control
  • Farm and small agricultural temperature setups

What's in the Box

One STC-3018 dual digital temperature controller thermostat and one attached waterproof NTC 10K sensor.

Quick specs

Model No. / Name
Temperature Controller
Power Supply Voltage (V)
110-220VAC
Resolution
0.1
Accuracy
± 1°C
Contact Capacity
10A/240VAC (Heating Relay output), 10A/240VCA (Cooling Relay output)
Sensor Type
NTC 10K Sensor
See all specifications