
1 / 2 · Click to enlarge
At a glance
Made by STMicroelectronics, this arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Evaluation Board; based on STM32 Based; function STM32 Nucleo. Check that your power source supplies 18 to 32.5 V before connecting it.
Key Highlights
- Item Type: Evaluation Board
- Based On: STM32 Based
- Function: STM32 Nucleo
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Evaluation Board |
|---|---|
| Based On | STM32 Based |
| Function | STM32 Nucleo |
| Package | QFN-26L (3.5x5x1 mm) package |
| Regulator | 65 mA selectable (3.3 or 5.0 V) linear regulator |
| Operating Voltage (V) | 18 to 32.5 V |
| Shipping Weight | 0.07 kg |
| Shipping Dimensions | 16 × 12 × 4 cm |
Overview
The STMICROELECTRONICS Evaluation Board, L6360 IO-Link Master Transceiver, ST Morpho, For STM32 Nucleo, made by STMicroelectronics, is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Evaluation Board
- Based On: STM32 Based
- Function: STM32 Nucleo
- Regulator: 65 mA selectable (3.3 or 5.0 V) linear regulator
- Operating Voltage (V): 18 to 32.5 V (match this to your power supply; too high a voltage can damage the part)
- Shipping Weight: 0.07 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 16 × 12 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The STEVAL-IOM001V1 evaluation board is based on the L6360 IO-Link master transceiver with physical layer compliant with IO-Link v1.1 specification. Together with the STSW-IOM001 example code, it provides an affordable and easy to- use solution for the development of IO-Link applications, letting you easily evaluate the communication features and robustness of the L6360. You can also perform evaluation of multiple ports industrial IO-Link master modules by connecting up to four STEVAL-IOM001V1 with few solder bridge modifications. The STEVAL-IOM001V1 interfaces with the STM32 Nucleo microcontroller via UART and GPIO pins and is compatible with the Arduino UNO R3 (optional configuration) and ST morpho (default configuration) connectors.
Features:
- IO-Link master PHY based on L6360
- Interrupt diagnostics pin
- SPI (slave) interface
- CQ (push-pull) and L+ (high side) switches
- IQ additional IEC61131-2 type 1 digital input
- L+ and CQ overload and overheating protections with non-dissipative cut-off function
- Additional high side switch for L+ heavy loads (IPS161H)
Package Includes:
1 x STMICROELECTRONICS Evaluation Board, L6360 IO-Link Master Transceiver, ST Morpho, For STM32 Nucleo
Quick specs
- Item Type
- Evaluation Board
- Based On
- STM32 Based
- Function
- STM32 Nucleo
- Regulator
- 65 mA selectable (3.3 or 5.0 V) linear regulator
- Operating Voltage (V)
- 18 to 32.5 V
- Shipping Weight
- 0.07 kg


















