Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

In-circuit debugger and programmer for STM8 and STM32 microcontrollers. USB-powered and compatible with SWIM and JTAG/SWD interfaces for direct on-board programming and debugging.

Key Highlights

  • Works with STM8 and STM32 microcontroller families
  • SWIM and JTAG/SWD interfaces for flexible target connection
  • USB-powered via standard A to mini B cable
  • Supports target voltages from 1.65V to 5.5V
  • Status LED indicates communication activity
  • Direct firmware update capability

Ideal For

  • Embedded developers working with STM8 or STM32 microcontrollers
  • Electronics students learning microcontroller programming
  • Hobbyists building STM32-based projects
  • Engineers needing in-circuit debugging on application boards
  • Makers repairing or updating STM8/STM32 devices

Buying Tip

Check that your target board uses either SWIM (STM8) or JTAG/SWD (STM32) and that its operating voltage falls within the supported ranges before purchasing.

Elecvora expert review

Our verdict

The ST-LINK/V2 is a dependable, no-frills programmer for STM8 and STM32 development. It covers the essential interfaces and voltage ranges without extra cost or complexity.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Supports both STM8 and STM32 families
  • USB-powered with no external supply needed
  • Includes necessary cables and ribbon
  • Wide target voltage support

Cons

  • Does not provide power to the target board
  • Requires separate development software installation
  • No isolation between PC and target (unlike isolated variants)

Best for

Developers and students working with STM8 or STM32 microcontrollers

Not ideal for

Those needing isolated debugging or target power supply

Specifications

Item TypeProgrammer, Debugger
Based OnSTM32 Based, STM8 Based
Voltage Rating (V)5
Cable TypeA to mini B cable
InterfaceSWIM
Operating Voltage (V)5
Shipping Weight0.9 kg
Shipping Dimensions12 × 8 × 3 cm

What's in the box

  • 1 x ST-LINK/V2 debugging and programming unit
  • 1 x USB standard A to mini B cable
  • 1 x Connecting cable for STM8 SWIM and STM32 JTAG/SWD protocol
  • 1 x Flat ribbon with standard ERNI connector (20-pin JTAG/SWD/SWV)

Frequently Asked Questions

What microcontrollers does the ST-LINK/V2 support?
It supports the STM8 and STM32 microcontroller families using the SWIM or JTAG/SWD interfaces.
Does the ST-LINK/V2 power the target board?
No, it is powered from the USB connection but does not supply power to the target application board.
What software is required?
For STM8, use ST Visual Develop (STVD) or ST Visual Program (STVP). For STM32, use Atollic, IAR, Keil, or TASKING IDEs.
What is included in the package?
The package includes the ST-LINK/V2 unit, a USB A to mini B cable, a connecting cable for SWIM and JTAG/SWD, and a flat ribbon with an ERNI connector.
Can the firmware be updated?
Yes, the ST-LINK/V2 supports direct firmware updates.
What target voltages are supported?
The SWIM interface supports 1.65V to 5.5V, and the JTAG/SWD interface supports 1.65V to 3.6V with 5V-tolerant inputs.

Overview

The ST-LINK/V2 from STMicroelectronics is an in-circuit debugger and programmer built for the STM8 and STM32 microcontroller families. It provides a direct link between your development computer and the target microcontroller on an application board, allowing you to program memory and debug code without removing the chip. The tool communicates over a USB full-speed interface and supports the single wire interface module (SWIM) for STM8 devices and JTAG or serial wire debugging (SWD) for STM32 devices.

Key Features

  • Dual-family support: Works with both STM8 and STM32 microcontrollers.
  • SWIM and JTAG/SWD interfaces: Covers the programming and debugging needs of both families.
  • USB powered: Draws 5V from the USB connector, so no separate power supply is required.
  • Wide target voltage range: Supports 1.65V to 5.5V on SWIM and 1.65V to 3.6V on JTAG/SWD, with 5V-tolerant inputs.
  • Status LED: Blinks during communication with the PC for quick visual feedback.
  • Firmware updatable: Supports direct firmware updates to keep the programmer current.

Specifications Explained

The ST-LINK/V2 is based on STM32 and STM8 microcontroller technology and is rated for 5V operation, supplied through the USB connection. The included USB standard A to mini B cable connects the programmer to your computer. The SWIM interface supports low-speed and high-speed modes, giving flexibility for different STM8 devices. The JTAG/SWD interface operates at 1.65V to 3.6V, while the SWIM interface accepts 1.65V to 5.5V, making the tool suitable for a broad range of target boards. Shipping weight is 0.9 kg, and the package measures 12 × 8 × 3 cm.

Compatibility and Requirements

The ST-LINK/V2 is intended for use with STM8 and STM32 microcontrollers. For STM8 development, it works with ST Visual Develop (STVD) or ST Visual Program (STVP) software. For STM32 development, it is compatible with Atollic, IAR, Keil, or TASKING integrated development environments. A host PC with a USB port is required. The programmer is powered solely from the USB bus, so no external adapter is needed.

Typical Uses

This debugger is commonly used for flashing firmware and debugging code on STM8 and STM32 application boards. It suits bench development, educational projects, and small-scale production programming where a reliable in-circuit tool is needed. The SWIM interface is particularly useful for STM8 devices, while JTAG/SWD covers STM32 targets.

What's in the Box

  • 1 x ST-LINK/V2 debugging and programming unit
  • 1 x USB standard A to mini B cable
  • 1 x Connecting cable for STM8 SWIM and STM32 JTAG/SWD protocol
  • 1 x Flat ribbon with a standard ERNI connector at one end (20-pin JTAG or SWD and SWV ribbon)

Quick specs

Item Type
Programmer, Debugger
Based On
STM32 Based, STM8 Based
Voltage Rating (V)
5
Cable Type
A to mini B cable
Interface
SWIM
Operating Voltage (V)
5
See all specifications