
1 / 3 · Click to enlarge
AI Summary
A compact USB programmer and debugger for STM8 and STM32 microcontrollers, supporting SWD and SWIM connections. It supplies both 5V and 3.3V to the target board and includes four DuPont wires for quick hookup.
Key Highlights
- Works with STM8 and STM32 microcontroller families
- SWD and SWIM interfaces for download and debugging
- 5V and 3.3V supply rails available on the header
- Laser-engraved pin labels stay readable over time
- 500 mA resettable fuse protects the host computer
- Red and blue LEDs indicate working status
Ideal For
- STM32 and STM8 firmware developers working at a bench
- Electronics repair technicians flashing microcontroller boards
- Makers and students learning embedded programming
- Small-batch production teams needing a compact programmer
- Hobbyists debugging STM8 and STM32 projects
Buying Tip
Check that your target board's SWD or SWIM header order matches the engraved pinout, and use the included DuPont wires to rearrange connections if it does not.
Elecvora expert review
Our verdict
A small, well-labelled programmer that covers both STM8 and STM32 work with minimal wiring. The dual voltage rails and resettable fuse make it a sensible bench companion for routine flashing and debugging.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports both STM8 and STM32 families
- Pinout engraved on the shell for quick reference
- 5V and 3.3V rails available together
- Resettable fuse protects the host computer
- Includes four DuPont wires for flexible hookup
Cons
- Colour and design are shipped at random
- Requires a separate driver installation before first use
- Operating range limited to 0 to 50 degrees Celsius
Best for
Bench programming and debugging of STM8 and STM32 boards
Not ideal for
Applications needing a branded or certified production programmer
Specifications
| Item Type | Programmer |
|---|---|
| Based On | STM32 Based, STM8 Based |
| Weight (g) | 15 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 7 × 3 × 3 cm |
What's in the box
- 1 x ST-Link V2 Programmer for STM8 and STM32
- 1 x Connecting Wires
Frequently Asked Questions
Which microcontrollers can this programmer handle?
Do I need external power for the target board?
Which software works with this device?
What is included in the package?
Does the programmer protect my computer?
What voltage range does the SWIM interface accept?
Overview
The ST-Link V2 is a USB programmer and debugger built for STM8 and STM32 microcontrollers. It plugs into a computer and connects to the target board through a short ribbon of header pins, allowing you to send program code to 8-bit STM8 and 32-bit STM32 devices and to debug them in circuit. The unit follows the official tool layout, so it works with the common ST development environments and supports automatic firmware upgrades.
Key Features
- Dual family support: programs and debugs both STM8 and STM32 parts.
- SWD and SWIM: a full STM32 SWD link needs only four pins, and a full STM8 SWIM link needs only four pins, keeping wiring simple.
- Dual supply rails: 5V and 3.3V are available at the same time so you can power the target board at either level.
- Clear labelling: the interface definition is laser-engraved on the shell, so the pinout stays legible and does not wear off.
- Protected host: a 500 mA resettable fuse guards the computer motherboard against faults on the target side.
- Status LEDs: red and blue indicators let you watch the programmer's working condition at a glance.
- Flexible hookup: four DuPont wires are included to match different target board pin orders.
Specifications Explained
The header exposes 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST) and GND. For STM32 targets you use SWCLK, SWDIO and power; for STM8 targets you use SWIM, Reset and power. The SWIM interface accepts application voltages from 1.65V to 5.5V and supports both low-speed and high-speed modes, with programming rates of about 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed. Direct firmware update over USB is supported. The unit weighs about 15 g and the shipping package measures roughly 7 x 3 x 3 cm at 0.018 kg, so it stores easily in a tool drawer.
Compatibility and Requirements
The programmer is supported by ST-LINK Utility 2.0 and above, STVD 4.2.1 and above, STVP 3.2.3 and above, IAR EWARM V6.20 and above, IAR EWSTM8 V1.30 and above, and KEIL RVMDK V4.21 and above. A computer with a USB port and the appropriate driver is required. The rated operating temperature is 0 to 50 degrees Celsius.
Typical Uses
Use it to flash firmware onto STM32 and STM8 development boards, to debug code during prototyping, to recover or update a board during repair, and to program small production batches. It is equally suited to a hobby bench and a repair station.
What's in the Box
- 1 x ST-Link V2 programmer for STM8 and STM32
- 1 x connecting wires
The product is available in multiple colours and designs and is shipped at random.
Quick specs
- Item Type
- Programmer
- Based On
- STM32 Based, STM8 Based
- Weight (g)
- 15
- Shipping Weight
- 0.018 kg
- Shipping Dimensions
- 7 × 3 × 3 cm















