Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A non-dismantling clip that lets you test and program SOP8 24C, 93C and 25LF BIOS and EEPROM chips directly on the board. It saves desoldering time and reduces the risk of damaging the chip or PCB.

Key Highlights

  • Clips onto SOP8 chips for in-circuit reading, writing and testing
  • Works with 24C, 93C and 25LF series memory devices
  • Avoids desoldering, cutting repair time and board damage risk
  • 3.81mm pitch row and 2.54mm lead pitch for adapter connections
  • Compact 5 x 5 x 4 cm size and light 0.03 kg shipping weight
  • Useful for BIOS recovery, firmware updates and diagnostics

Ideal For

  • Repair technicians working on motherboard BIOS chips
  • Electronics engineers doing firmware updates and diagnostics
  • Router and set-top box repair specialists
  • Hobbyists and makers working with SOP8 EEPROM and flash
  • Bench technicians who want to avoid desoldering chips

Buying Tip

Confirm your programmer supports ISP/ICSP mode and that you have a matching adapter or breakout board before relying on this clip for in-circuit work.

Elecvora expert review

Our verdict

A practical, low-cost accessory for in-circuit SOP8 memory work that saves desoldering time and reduces board damage risk. It performs best when paired with a capable programmer and the right adapter.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Avoids chip removal and the associated PCB risk
  • Covers 24C, 93C and 25LF series SOP8 devices
  • Compact and light for bench or field use
  • Straight 1:1 wiring keeps setup simple

Cons

  • Programmer and adapter are not included
  • In-circuit results can depend on the surrounding circuit
  • Clip alignment on fine legs needs care

Best for

Technicians and engineers doing BIOS recovery and EEPROM diagnostics on SOP8 chips

Not ideal for

Users without a compatible ISP-capable programmer or adapter

Specifications

Item TypeAccessory
Pitch row3.81mm
Pitch Lead2.54mm
Shipping Weight0.03 kg
Shipping Dimensions5 × 5 × 4 cm

What's in the box

  • 1 x SPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF

Frequently Asked Questions

Do I need to remove the BIOS chip from the board?
No. The clip is designed for non-dismantling work, so you can test or program the SOP8 chip while it stays soldered in place.
Which chip series are supported?
The clip supports SOP8 packaged chips in the 24C, 93C and 25LF series.
What programmer do I need?
You need a compatible programmer with a ZIF/DIL socket that supports ISP/ICSP mode, plus a suitable adapter or breakout board. These are not included.
Is a power supply included?
No power supply is included. The clip is a passive accessory that routes signals between the chip and your programmer.
What is included in the package?
The package contains one SPI BIOS FLASH Non-Dismantling Test Program Clip for SOP8 24C 93C 25LF chips.
How should I care for the clip?
Keep the contacts clean and dry, store it in a small case, and avoid bending the clip jaws or chip legs during attachment and removal.

Overview

The Generic SPI BIOS Flash Non-Dismantling Test Program Clip is an accessory for technicians who need to work on SOP8 memory chips without removing them from the circuit board. Instead of desoldering a BIOS or EEPROM chip, you clip onto its legs and connect the clip to a compatible programmer through the 1:1 wired path. This makes reading, writing and testing possible while the chip remains in place.

The clip is intended for SOP8 packaged devices in the 24C, 93C and 25LF series. That covers a wide range of EEPROM and SPI flash chips found in motherboards, routers, set-top boxes and other electronics. It is a practical addition to a repair bench where fast turnaround matters.

Key Features

  • Non-dismantling design: test or program chips in-circuit without removing them from the PCB.
  • SOP8 compatibility: the clip is shaped for standard SOP8 packages.
  • Series support: works with 24C, 93C and 25LF memory families.
  • 1:1 wiring: the connection is straight-through, so it can work with programmers that support ISP/ICSP mode.
  • Compact and light: shipping dimensions of 5 x 5 x 4 cm and a shipping weight of 0.03 kg make it easy to store and carry.

Specifications Explained

Pitch row 3.81mm refers to the spacing of the connector row used to link the clip to an adapter or breakout board. Pitch lead 2.54mm is the standard spacing for the lead connections, matching common prototyping and adapter hardware. Together these pitches help the clip interface with widely used programmer sockets and breakout boards.

The item is classified as an accessory, so it is a supporting tool rather than a standalone programmer. The 1:1 wiring means each contact passes straight through without crossing, which keeps signal routing simple and predictable.

Compatibility and Requirements

The clip supports SOP8 chips in the 24C, 93C and 25LF series. It requires a compatible programmer with a ZIF/DIL socket that supports ISP/ICSP mode, along with the appropriate adapter or breakout board for the connection. The programmer and adapter are not included.

Typical Uses

  • BIOS recovery and reflashing on desktop and laptop mainboards
  • Firmware updates on routers, set-top boxes and embedded devices
  • Reading and writing 24C and 93C EEPROM contents
  • Diagnostics and fault finding on SOP8 memory chips
  • Bench work where avoiding chip removal protects the PCB

What's in the Box

1 x SPI BIOS FLASH Non-Dismantling Test Program Clip SOP8 24C 93C 25LF.

Quick specs

Item Type
Accessory
Pitch row
3.81mm
Pitch Lead
2.54mm
Shipping Weight
0.03 kg
Shipping Dimensions
5 × 5 × 4 cm
See all specifications