Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by STMicroelectronics, this arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; based on STM32 Based; input voltage (v) Up to 60V. Check that your power source supplies Up to 60V before connecting it.

Key Highlights

  • Item Type: Development Board
  • Based On: STM32 Based
  • Input Voltage (V): Up to 60V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Based OnSTM32 Based
Input Voltage (V)Up to 60V
Current Limit (A)Up to 2.4A
Operating Voltage (V)12 to 33V
Operating Current (A)0 to 2.4A
Total Power DissipationRON(MAX) 120 m Ohms
ConnectivityArduino™ UNO R3 connectors
Shipping Weight0.086 kg
Shipping Dimensions22 × 17 × 4 cm

Overview

The STMICROELECTRONICS Expansion Board, IPS160HF, STM32 Nucleo Development Board, made by STMicroelectronics, is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Based On: STM32 Based
  • Input Voltage (V): Up to 60V (match this to your power supply; too high a voltage can damage the part)
  • Current Limit (A): Up to 2.4A (your supply must deliver at least this much current)
  • Operating Voltage (V): 12 to 33V (match this to your power supply; too high a voltage can damage the part)
  • Operating Current (A): 0 to 2.4A (your supply must deliver at least this much current)
  • Total Power Dissipation: RON(MAX) 120 m Ohms
  • Connectivity: Arduino™ UNO R3 connectors (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible evaluation and development environment for 2A (typ) digital output modules, featuring the safe driving and smart diagnostic capabilities of the IPS160HF single high-side switch. The X-NUCLEO-OUT08A1 interfaces with the microcontroller on the STM32 Nucleo via 3KV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board and can also be stacked with another XNUCLEO-OUT08A1 or X-NUCLEO-OUT10A1. Two X-NUCLEO-OUT08A1 expansion boards allows you to evaluate a dual channel digital output module with 2A (typ.) capability each, or a 2A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one.

Note: For more technical details go through Datasheet in the attachment section


Features: 

  1. Based on IPS160HF single high-side switch, which features: – Operation up to 60 V/2.4 A – Low power dissipation (RON(MAX) = 120 mΩ) – Fast decay for inductive loads – Open load detection and diagnostics – Overload and overheating protections with thermal shut-down and cut-off – PowerSSO-12L package
  2. Application board operating range: 12 to 33 V/0 to 2.4 A
  3.  Extended voltage operating range (J1 open) up to 60 V
  4.  Status and diagnostic LEDs
  5.  3 kV galvanic isolation
  6.  Supply rail reverse polarity protection
  7.  Ready for Safety Digital Output Architecture
  8.  EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
  9.  Wide application development potential in STM32 Nucleo development environment
  10.  Equipped with Arduino™ UNO R3 connectors

Package Includes:

1 x STMicroelectronics Expansion Board, IPS160HF, STM32 Nucleo Development Board

Quick specs

Item Type
Development Board
Based On
STM32 Based
Input Voltage (V)
Up to 60V
Current Limit (A)
Up to 2.4A
Operating Voltage (V)
12 to 33V
Operating Current (A)
0 to 2.4A
See all specifications