Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by STMicroelectronics, this arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; based on STM32 Based; model no. / name STM32 Nucleo-64, STM32F030R8T6 MCU.

Key Highlights

  • Item Type: Development Board
  • Based On: STM32 Based
  • Model No. / Name: STM32 Nucleo-64, STM32F030R8T6 MCU

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDevelopment Board
Based OnSTM32 Based
Model No. / NameSTM32 Nucleo-64, STM32F030R8T6 MCU
Output Frequency32.768 kHz
Board connectorsARDUINO Uno V3 expansion connector ST morpho extension pin headers for full access to all STM32 I/Os
System requirementsWindows OS (7, 8 and 10), Linux 64-bit, or macOS USB Type-A or USB Type-C to Micro-B cable, or USB Type-A or USB Type-C to Mini-B cable (depending on the board reference)
Weight (g)34g
Shipping Weight0.07 kg
Shipping Dimensions12 × 10 × 4 cm

Overview

The STMICROELECTRONICS NUCLEO-F030R8 Development Board, STM32 Nucleo-64, STM32F030R8T6 MCU, Arduino and ST Morpho Connectivity, made by STMicroelectronics, is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Development Board
  • Based On: STM32 Based
  • Model No. / Name: STM32 Nucleo-64, STM32F030R8T6 MCU (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Output Frequency: 32.768 kHz (make sure the rest of your system works at this frequency)
  • Board connectors: ARDUINO Uno V3 expansion connector ST morpho extension pin headers for full access to all STM32 I/Os (confirm your cable or board uses the same connector)
  • System requirements: Windows OS (7, 8 and 10), Linux 64-bit, or macOS USB Type-A or USB Type-C to Micro-B cable, or USB Type-A or USB Type-C to Mini-B cable (depending on the board reference)
  • Weight (g): 34g (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.07 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The NUCLEO-F030R8 is a STM32 Nucleo development board with STM32F030R8T6 MCU allows user to build their own prototypes for embedded applications. The Arduino connectivity support and ST Morpho headers make it easy to expand the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer. The STM32 Nucleo board series are based on ARM Cortex-M 32-bit RISC cores optimised for high performance and energy efficiency. ARM Cortex-M features a high density instruction set and a Nested Vectored Interrupt Controller (NVIC) providing excellent interrupt handling abilities. Note: For more info., refer to datasheet. Kindly note the MB1136-F030R8-C04 model no. from backside of the board.

Features:

  1. STM32 microcontroller
  2. 1 user LED shared with ARDUINO
  3. 1 user and 1 reset push-buttons
  4. 32.768KHz crystal oscillator
  5. Flexible power-supply options: ST-LINK, USB VBUS, or external sources
  6. On-board ST-LINK debugger/programmer with USB re-enumeration capability

Packages Includes:

1 x STMICROELECTRONICS Development Board STM32 Nucleo-64 STM32F030R8T6 MCU, Arduino and ST Morpho Connectivity

Quick specs

Item Type
Development Board
Based On
STM32 Based
Model No. / Name
STM32 Nucleo-64, STM32F030R8T6 MCU
Output Frequency
32.768 kHz
Board connectors
ARDUINO Uno V3 expansion connector ST morpho extension pin headers for full access to all STM32 I/Os
System requirements
Windows OS (7, 8 and 10), Linux 64-bit, or macOS USB Type-A or USB Type-C to Micro-B cable, or USB Type-A or USB Type-C to Mini-B cable (depending on the board reference)
See all specifications