Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by STMicroelectronics, this arm microcontroller boards is a good fit for makers, students and electronics hobbyists. Main specs: item type On Board Debugger, Development Board; based on STM32 Based; microcontroller STM32L011K4. Check that your power source supplies 3.3 V, 5 V, 7 V to 12 V before connecting it.

Key Highlights

  • Item Type: On Board Debugger, Development Board
  • Based On: STM32 Based
  • Microcontroller: STM32L011K4

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOn Board Debugger, Development Board
Based OnSTM32 Based
MicrocontrollerSTM32L011K4
ProcessorARM
Operating Supply Voltage3.3 V, 5 V, 7 V to 12 V
Data Bus Width32
Interface TypeCAN, I2C, SPI, USART
Shipping Weight0.044 kg
Shipping Dimensions17 × 14 × 4 cm

Overview

The STMICROELECTRONICS NUCLEO-L011K4 Development Board, STM32L011K4 MCU, On-Board Debugger, Arduino Nano Compatible, made by STMicroelectronics, is listed in our arm microcontroller boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: On Board Debugger, Development Board
  • Based On: STM32 Based
  • Microcontroller: STM32L011K4 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Processor: ARM (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Operating Supply Voltage: 3.3 V, 5 V, 7 V to 12 V (match this to your power supply; too high a voltage can damage the part)
  • Data Bus Width: 32 (measure your mounting space before ordering)
  • Interface Type: CAN, I2C, SPI, USART (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.044 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The NUCLEO-L011K4 is an STM32 Nucleo-32 Development Board with an STM32L011K4 microcontroller which provides a flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™ Nano connectivity makes it easy to expand the functionality of the STM32 Nucleo open development platform with a choice of specialized shields. The board does not require any separate probe as it integrates the ST-LINK/V2-1 debugger/programmer and comes with the STM32 comprehensive software HAL library, various packaged software examples, and direct access to the ARM®mbed™on-line resources.

Features:

  1. STM32L011K4T6 microcontroller in an LQFP32 package
  2. ST-LINK/V2-1 debug/programmer tool on-board
  3. ARM® mbed Enabled™
  4. USB Functions: Debug port, Virtual COM port, Mass Storage
  5. Three LEDs: USB comms, power, user configurable
                                               note: For more technical details, go through the Datasheet in the attachments

Package Includes:

1 x STMICROELECTRONICS NUCLEO-L011K4 Development Board, STM32L011K4 MCU, On-Board Debugger, Arduino Nano Compatible

Quick specs

Item Type
On Board Debugger, Development Board
Based On
STM32 Based
Microcontroller
STM32L011K4
Processor
ARM
Operating Supply Voltage
3.3 V, 5 V, 7 V to 12 V
Data Bus Width
32
See all specifications