
1 / 3 · Click to enlarge
At a glance
Made by STMicroelectronics, this advance development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; model no. / name NUCLEO WB05KZ; main control (mcu) Arm Cortex-M0+. Check that your power source supplies 1.8 to 3.6 before connecting it.
Key Highlights
- Item Type: Development Board
- Model No. / Name: NUCLEO WB05KZ
- Main control (MCU): Arm Cortex-M0+
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Development Board |
|---|---|
| Model No. / Name | NUCLEO WB05KZ |
| Main control (MCU) | Arm Cortex-M0+ |
| Debugger | On-board STLINK-V3EC |
| Connectivity | Bluetooth Low Energy v5.4 |
| Flash | 192 KB |
| SRAM | 24 KB |
| IDE | STM32CubeIDE, IAR Embedded Workbench, MDK-ARM |
| Wireless | 2.4 GHz Bluetooth Low Energy |
| GPIO | Up to 39 GPIOs |
| Operating Voltage (V) | 1.8 to 3.6 |
| Length (mm) | 70 |
| Width (mm) | 73.6 |
| Weight (g) | 40 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.079 kg |
| Shipping Dimensions | 12 × 10 × 4 cm |
Overview
The STMICROELECTRONICS NUCLEO-WB05KZ Development Board, made by STMicroelectronics, is listed in our advance development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Development Board
- Model No. / Name: NUCLEO WB05KZ
- Main control (MCU): Arm Cortex-M0+ (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Debugger: On-board STLINK-V3EC
- Connectivity: Bluetooth Low Energy v5.4 (check your phone or controller supports the same Bluetooth version for full range)
- Flash: 192 KB (space for firmware, files or media)
- SRAM: 24 KB
- IDE: STM32CubeIDE, IAR Embedded Workbench, MDK-ARM
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The STM32 NUCLEO-WB05KZ development board enables easy evaluation and development of Bluetooth Low Energy wireless applications.
Powered by the ultra-low-power STM32WB05KZ MCU based on the Arm Corter-M0+ core, it features an integrated 2.4 GHz RF transceiver compliant with Bluetooth v5.4 and a built-in PCB antenna. The board includes Arduino Uno V3 and ST Morpho headers for flexible expansion and full access to MCU I/Os.
With an on-board STLINK-V3EC debugger, USB Type-C connectivity, and STM32CubeWB software support, it accelerates the development of wireless IoT and embedded applications.
Features:
- STM32WB05KZ ultra-low-power wireless MCU
- Bluetooth Low Energy v5.4 compliant radio
- Built-in PCB antenna for RF connectivity
- Arduino Uno V3 and ST Morpho expansion headers
- On-board STLINK-V3EC debugger/programmer
- Core Architecture: Arm Cortex-M0+ (32-bit)
- ntenna Type: Integrated PCB antenna (on-board RF trace antenna; typical gain ~0 dBi, refer to RF layout documentation for exact value)
- BLE Stack Support: Supported via STM32CubeWB software package and STM32Cube ecosystem
Package Includes:
1 x STMICROELECTRONICS NUCLEO-WB05KZ Development BoardQuick specs
- Item Type
- Development Board
- Model No. / Name
- NUCLEO WB05KZ
- Main control (MCU)
- Arm Cortex-M0+
- Debugger
- On-board STLINK-V3EC
- Connectivity
- Bluetooth Low Energy v5.4
- Flash
- 192 KB


















