
1 / 4 · Click to enlarge
AI Summary
An STM32F407VET6 development board built on a 32-bit ARM Cortex-M4 core with FPU and DSP instructions, 1 MB Flash and 140 I/O pins. USB Type-C connectivity and SWD debugging make it ready for embedded control and signal processing projects.
Key Highlights
- ARM 32-bit Cortex-M4 core with single-precision FPU and DSP instructions
- 1 MB Flash and 192 KB SRAM plus 4 KB backup SRAM
- Up to 140 general-purpose I/O pins for flexible peripheral wiring
- USB Type-C connector and SWD debug interface on board
- Two 12-bit DACs, multiple timers and PWM channels for motor control
- Operates from 1.8 to 3.6 V across -40 to 85 degrees Celsius
Ideal For
- Embedded engineers developing motor control firmware
- Students learning 32-bit ARM Cortex-M4 programming
- Makers building signal processing or data acquisition prototypes
- Product developers needing many I/O pins in a compact board
- Hobbyists working with PWM, ADC and DAC peripherals
Buying Tip
Confirm you have an SWD programmer or debug probe before starting, since one is not included and is needed to load and debug firmware.
Elecvora expert review
Our verdict
A well-rounded Cortex-M4 board that pairs a floating point unit and DSP instructions with ample memory and a large I/O count. It suits engineers who need computation headroom and many pins without a large footprint.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- FPU and DSP instructions speed up math and signal processing
- 1 MB Flash and 192 KB SRAM plus 4 KB backup SRAM
- 140 I/O pins support peripheral-heavy designs
- USB Type-C connector and SWD debug access
- Two 12-bit DACs and PWM timers built in
Cons
- No Ethernet connector on this version
- SWD probe and power source are not included
- Operating voltage range requires care when interfacing 5 V parts
Best for
Embedded control, motor control and signal processing development
Not ideal for
Projects that require built-in Ethernet networking
Specifications
| Item Type | microcontroller board |
|---|---|
| Based On | STM32 (ARM Cortex-M) |
| Core | ARM 32 Cortex M4 CPU |
| Flash Memory | 1 MB |
| No. of Bits | 32 |
| No. of I/O pins | 140 |
| USB Type | USB Type-C |
| Function | Embedded control, signal processing, motor control |
| Memory Capacity | 192+4 Kbytes SRAM |
| Debug Mode | SWD |
| USB Connector | Yes |
| D/A Converters | 2 x 12-bit |
| Operating Voltage (V) | 1.8 to 3.6 |
| Operating Temperature (°C) | −40 to 85 |
| Ethernet Connector | No |
| Length (mm) | 88 |
| Width (mm) | 72 |
| Weight (g) | 37 |
| Shipping Weight | 0.067 kg |
| Shipping Dimensions | 15 × 15 × 4 cm |
What's in the box
- 1 x STM32F407VET6 ARM Cortex-M4 board
- 10 x Jumper wire
- 1 x USB cable
Frequently Asked Questions
What core does this board use?
How much memory is available?
What voltage does the board need?
How do I program and debug it?
Does it have Ethernet?
What is included in the package?
Overview
The STM32F407VET6 board is a compact microcontroller development platform built around the STM32 ARM Cortex-M4 core. It combines a 32-bit processor with a single-precision floating point unit and a complete DSP instruction set, so arithmetic-heavy routines and signal processing loops run efficiently without external acceleration. The board measures 88 mm by 72 mm and weighs 37 g, which keeps it manageable on a bench or inside an enclosure.
Memory is generous for a board of this size: 1 MB of Flash for program storage, 192 KB of SRAM for runtime data, and an additional 4 KB backup SRAM that can retain content across low-power states. Up to 140 I/O pins are available for connecting sensors, drivers, displays and communication modules.
Key Features
- ARM Cortex-M4 core with floating point and DSP support for computation and control
- 1 MB Flash, 192 KB SRAM and 4 KB backup SRAM for larger firmware images and data buffers
- 140 general-purpose I/O pins for multi-peripheral designs
- USB Type-C connector for host connectivity
- SWD debug interface for programming and in-circuit debugging
- Two 12-bit DACs plus ADC and timer resources, including PWM channels
Specifications Explained
The Cortex-M4 core with FPU matters when your code performs decimal math, filtering or control loop calculations; the hardware unit removes the need for software floating point emulation. DSP instructions speed up operations such as multiply-accumulate, which is common in audio and sensor processing.
1 MB Flash gives room for substantial firmware, while 192 KB SRAM supports buffering and stack-heavy tasks. The 4 KB backup SRAM is useful for small values that should survive a reset or low-power period. With 140 I/O pins, the board suits designs that need many digital inputs, outputs or bus connections at once.
Two 12-bit DACs allow direct analog output without extra components, and the timer set includes PWM channels suited to motor drive. The operating range of 1.8 to 3.6 V and a temperature rating of -40 to 85 degrees Celsius define the electrical and environmental envelope for your design.
Compatibility and Requirements
Programming and debugging use the SWD interface, so a compatible SWD probe is required and is not part of the package. The board accepts a supply between 1.8 and 3.6 V; check that your power source and connected peripherals match this range. USB connectivity is provided through the onboard Type-C connector.
Typical Uses
- Embedded control systems and automation prototypes
- Signal processing experiments using the FPU and DSP instructions
- Motor control projects using PWM timers
- Data acquisition with ADC and DAC channels
- Teaching and learning 32-bit ARM microcontroller development
What's in the Box
The package contains one STM32F407VET6 ARM Cortex-M4 board, ten jumper wires and one USB cable.
Quick specs
- Item Type
- microcontroller board
- Based On
- STM32 (ARM Cortex-M)
- Core
- ARM 32 Cortex M4 CPU
- Flash Memory
- 1 MB
- No. of Bits
- 32
- No. of I/O pins
- 140


















